How to Find the Perimeter of a Trapezoid

A trapezoid is defined as a quadrilateral with two parallel sides. As with any polygon, to find the perimeter of a trapezoid you need to add all four of its sides together. However, often you will be missing side lengths but have other information, such as the height of the trapezoid, or the angle measurements. Using this information, you can use rules of geometry and trigonometry to find the unknown lengths of sides.

Method 1

Method 1 of 3:

If You Know the Length of Both Sides and Bases

Download Article

The formula is $P=T+B+L+R$ , where $P$ equals the perimeter of the trapezoid, and the variables $T$ equals the length of the top base of the trapezoid, $B$ equals the length of the bottom base, $L$ equals the length of the left side, and $R$ equals the length of the right side.^{[1]XResearch source}
2
Plug the side lengths into the formula. If you do not know the length of all four sides of the trapezoid, you cannot use this formula.
- For example, if you have a trapezoid with a top base of 2 cm, a bottom base of 3 cm, and two side lengths of 1 cm, your formula will look like this:
  $P=2+3+1+1$
Advertisement
3
Add the side lengths together. This will give you the perimeter of your trapezoid.
- For example:
  $P=2+3+1+1$
  $P=7$
  So, the perimeter of the trapezoid is 7 cm.

Method 2

Method 2 of 3:

If You Know the Height, Both Side Lengths, and Top Base Length

Download Article

1
Divide the trapezoid into a rectangle and two right triangles. To do this, draw the height from both top vertices.
- If you cannot form two right triangles because one side of the trapezoid is perpendicular to the base, just note that this side will have the same measurement as the height, and divide the trapezoid into one rectangle and one right triangle.
2
Label each height line. Since these are opposite sides of a rectangle, they will be the same length.^{[2]XResearch source}
- For example, if you have a trapezoid with a height of 6 cm, you should draw a line from each top vertex extending down to the bottom base. Label each line 6 cm.
3
Label the length of the middle section of the bottom base. (This is the bottom side of the rectangle.) The length will equal the length of the top base (the top side of the rectangle), because opposite sides of a rectangle are of equal length.^{[3]XResearch source} If you do not know the length of the top base, you cannot use this method.
- For example, if the top base of the trapezoid is 6 cm, then the middle section of the bottom base is also 6 cm.
The formula is $a^{2}+b^{2}=c^{2}$ , where $c$ is the length of the hypotenuse of the right triangle (the side opposite the right angle), $a$ is the height of the right triangle, and $b$ is the length of the base of the triangle.^{[4]XResearch source}
5
Plug the known values from the first triangle into the formula. Make sure you plug in the side length of the trapezoid for $c$ $How.com.vn English: c$ . Plug in the height of the trapezoid for $a$ $How.com.vn English: a$ .
- For example, if you know the height of the trapezoid is 6 cm, and the length of the side (hypotenuse) is 9 cm, your equation will look like this:
  $6^{2}+b^{2}=9^{2}$
6
Square the known values in the equation. Then, subtract to isolate the $b$ $How.com.vn English: b$ variable.
- For example, if the equation is $6^{2}+b^{2}=9^{2}$ , you would square 6 and 9, then subtract the square of 6 from the square of 9:
  $6^{2}+b^{2}=9^{2}$
  $36+b^{2}=81$
  $b^{2}=45$
$How.com.vn English: Step 7 Take the square root to find the value of b {\displaystyle b} .$
7
Take the square root to find the value of $b$ . (For complete instructions on how to simplify square roots, you can read Simplify a Square Root.) The result will give you the value of the missing base of your first right triangle. Label this length on the base of your triangle.
- For example:
  $b^{2}=45$
  $b={\sqrt {45}}$
  $b={\sqrt {45}}$
  $b=3{\sqrt {5}}$
  So, you should label $3{\sqrt {5}}$ on the base of your first triangle.
8
Find the missing length of the second right triangle. To do this, set up the Pythagorean Theorem formula for the second triangle, and follow the steps to find the length of the missing side. If you are working with an isosceles trapezoid, which is a trapezoid in which the two non-parallel sides are the same length,^{[5]XResearch source} the two right triangles are congruent, so you can simply carry the value from the first triangle over to the second triangle.
- For example, if the second side of the trapezoid is 7 cm, you would calculate:
  $a^{2}+b^{2}=c^{2}$
  $6^{2}+b^{2}=7^{2}$
  $36+b^{2}=49$
  $b^{2}=13$
  $b={\sqrt {13}}$
  So, you should label ${\sqrt {13}}$ on the base of your second triangle.
9
Add up all the side lengths of the trapezoid. The perimeter of any polygon is the sum of all sides: $P=T+B+L+R$ $How.com.vn English: P=T+B+L+R$ . For the bottom base, you will add the bottom side of the rectangle, plus the bases of the two triangles. You will likely have square roots in your answer. For complete instructions on how to add square roots, you can read the article Add Square Roots. You can also use a calculator to convert the square roots to decimals.
- For example, $6+(6+3{\sqrt {5}}+{\sqrt {13}})+9+7=28+3{\sqrt {5}}+{\sqrt {13}}$
  Converting the square roots to decimals, you have $6+(6+6.708+3.606)+9+7=38.314$
  So, the approximate perimeter of your trapezoid is 38.314 cm.

Method 3

Method 3 of 3:

If You Know the Height, Length of Top Base, and Bottom Interior Angles

Download Article

1
Divide the trapezoid into a rectangle and two right triangles. To do this, draw the height from both top vertices.
- If you cannot form two right triangles because one side of the trapezoid is perpendicular to the base, just note that this side will have the same measurement as the height, and divide the trapezoid into one rectangle and one right triangle.
2
Label each height line. Since these are opposite sides of a rectangle, they will be the same length.^{[6]XResearch source}
- For example, if you have a trapezoid with a height of 6 cm, you should draw a line from each top vertex extending down to the bottom base. Label each line 6 cm.
3
Label the length of the middle section of the bottom base. (This is the bottom side of the rectangle.) This length will be equal to the length of the top base, because opposite sides of a rectangle are of equal length.^{[7]XResearch source}
- For example, if the top base of the trapezoid is 6 cm, then the middle section of the bottom base is also 6 cm.
4
Set up the sine ratio for the first right triangle. The ratio is $\sin \theta ={\frac {\text{opposite}}{\text{hypotenuse}}}$ $How.com.vn English: \sin \theta ={\frac {{\text{opposite}}}{{\text{hypotenuse}}}}$ , where $\theta$ $How.com.vn English: \theta$ is the measure of the interior angle, ${\text{opposite}}$ $How.com.vn English: {\text{opposite}}$ is the height of the triangle, and ${\text{hypotenuse}}$ $How.com.vn English: {\text{hypotenuse}}$ is the length of the hypotenuse.
- Using this ratio will allow you to find the length of the hypotenuse of the triangle, which is also the trapezoid's first side length.
- The hypotenuse is the side across from the 90 degree angle of a right triangle.
5
Plug the known values into the sine ratio. Make sure you use the height of the triangle as the length of the opposite side in the formula. You will solve for H.
- For example, if the given interior angle is 35 degrees, and the height of the triangle is 6 cm, your formula will look like this:
  $\sin(35)={\frac {6}{H}}$
6
Find the sine of the angle. Do this by using the SIN button on a scientific calculator. Plug this value into the ratio.
- For example, by using a calculator you will find that the sine of a 35 degree angle is .5738 (rounded). So your formula will now be:
  $.5738={\frac {6}{H}}$
7
Solve for H. To do this, multiply each side by H, then divide each side by the angle sine. Or, you can simply divide the height of the triangle by the angle sine.
- For example:
  $.5738={\frac {6}{H}}$
  $.5738H=6$
  ${\frac {.5738H}{.5738}}={\frac {6}{.5738}}$
  $H=10.4566$
  So, the length of the hypotenuse, and the first missing side of the trapezoid, is about 10.4566 cm.
8
Find the length of the hypotenuse of the second right triangle. Set up the sine ratio ( $\sin \theta ={\frac {\text{opposite}}{\text{hypotenuse}}}$ $How.com.vn English: \sin \theta ={\frac {{\text{opposite}}}{{\text{hypotenuse}}}}$ ) for the second given interior angle. This will give you the length of the hypotenuse, which is also the first side of the trapezoid.
- For example, if the given interior angle is 45 degrees, you would calculate:
  $\sin(45)={\frac {6}{H}}$
  $.7071={\frac {6}{H}}$
  $.7071H=6$
  ${\frac {.7071H}{.7071}}={\frac {6}{.7071}}$ $H=8.4854$
  So, the length of the hypotenuse, and the second missing side of the trapezoid, is about 8.4854 cm.
The Pythagorean Theorem formula is $a^{2}+b^{2}=c^{2}$ , where the length of the hypotenuse is $c$ , and the height of the triangle is $a$ .
10
Plug the known values into the Pythagorean Theorem for the first right triangle. Make sure you plug in the hypotenuse length for $c$ $How.com.vn English: c$ and the height for $a$ $How.com.vn English: a$ .
- For example, if the first right triangle has a hypotenuse of 10.4566, and a height of 6, your formula will be:
  $6^{2}+b^{2}=10.4566^{2}$
$How.com.vn English: Step 11 Solve for b {\displaystyle b} .$
11
Solve for $b$ . This will give you the length of base of the first right triangle, and the first missing section of the trapezoid’s bottom base.
- For example:
  $6^{2}+b^{2}=10.4566^{2}$
  $36+b^{2}=109.3405$
  $b^{2}=109.3405-36$
  $b^{2}=73.3405$
  ${\sqrt {b^{2}}}={\sqrt {73.3405}}$
  $b=8.5639$
  So, the base of the triangle, and the first missing section of the bottom base of the trapezoid, is about 8.5639 cm.
12
Find the length of the missing base of the second right triangle. Use the Pythagorean Theorem formula ( $a^{2}+b^{2}=c^{2}$ $How.com.vn English: a^{{2}}+b^{{2}}=c^{{2}}$ ) to do this. Plug in the length of the hypotenuse for $c$ $How.com.vn English: c$ , and the height for $a$ $How.com.vn English: a$ . Solving for $b$ $How.com.vn English: b$ will give you the length of the second missing section of the trapezoid’s bottom base.
- For example, if the second right triangle has a hypotenuse of 8.4854, and a height of 6, you would calculate:
  $6^{2}+b^{2}=8.4854^{2}$
  $36+b^{2}=72$
  $b^{2}=72-36$
  $b^{2}=36$
  ${\sqrt {b^{2}}}={\sqrt {36}}$
  $b=6$
  So, the base of the second triangle, and the second missing section of the bottom base of the trapezoid, is 6 cm.
13
Add up all the side lengths of the trapezoid. The perimeter of any polygon is the sum of all sides: $P=T+B+L+R$ $How.com.vn English: P=T+B+L+R$ . For the bottom base, you will add the bottom side of the rectangle, plus the bases of the two triangles.
- For example, $6+(8.5639+6+6)+10.4566+8.4854=45.5059$
  So, the approximate perimeter of your trapezoid is 45.5059 cm.

Community Q&A

Search

Add New Question

Question
How can I solve the hypotenuse of a right triangle with a height of 2ft?
Donagan
Top Answerer
You don't have enough information to find the hypotenuse. You would need the lengths of both legs or the size of at least one of the acute angles or the area of the triangle.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 15 Helpful 10
Question
How do I find the area without knowing the length of the sides of the trapezoid?
Donagan
Top Answerer
You would have to know the height of the trapezoid (h) and the lengths of both parallel sides (a and b). The area formula is [h(a + b)] / 2.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 10 Helpful 11
Question
Why are there so many formulas?
Donagan
Top Answerer
It's because there are several possible sets of known dimensions regarding a trapezoid.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 8 Helpful 3

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Use the laws of special triangles to find the missing lengths of special triangles without using sine or the Pythagorean Theorem. The laws apply to a 30-60-90 triangle, or a 90-45-45 triangle.
Thanks
Helpful0 Not Helpful0
Use a scientific calculator to find the sine of an angle by entering the angle measurement, then hitting the “SIN” button. You can also use a trigonometry table.
Thanks
Helpful0 Not Helpful0