Download ArticleDownload ArticleThis article was reviewed by Grace Imson, MA and by How.com.vn staff writer, Devin McSween. Grace Imson is a math teacher with over 40 years of teaching experience. Grace is currently a math instructor at the City College of San Francisco and was previously in the Math Department at Saint Louis University. She has taught math at the elementary, middle, high school, and college levels. She has an MA in Education, specializing in Administration and Supervision from Saint Louis University.
There are 12 references cited in this article, which can be found at the bottom of the page.
This article has been fact-checked, ensuring the accuracy of any cited facts and confirming the authority of its sources.
This article has been viewed 667,910 times.
If you’re learning about angles in geometry, your teacher probably just asked you to find angle measurements using a protractor. If one look at this tool has you scratching your head, don’t worry! Learning how to use a protractor is actually super easy. In this article, we’ll walk you through how to measure and draw angles using a simple protractor. If you’re ready to be a protractor expert, read on!
Things You Should Know
- Place the small hole or vertical line at the bottom center of your protractor over the vertex of your angle, or where the 2 lines meet.
- Then, adjust your protractor so 1 of the angle’s rays, or lines, is straight and flush against the 0° measurement.
- Start at 0° and follow the scale measurements up to where the other line passes through the protractor. The number it falls on is your angle’s measurement.
Steps
Examine whether your angle is acute, obtuse, or right. Most protractors have 2 sets of measurements along its arc, so looking at and classifying your angle helps you identify which scale to use. Acute angles are narrow and less than 90°, while obtuse angles are wide and greater than 90°. Right angles are exactly 90° and formed from 2 perpendicular rays, or lines.[1]- On most protractors, 1 scale starts from 0° on the right and ends at 180° on the left, while the other starts from 0° the left and ends at 180° on the right.
- In the above example, the 60° angle is acute because it has a narrow opening and is less than 90°. The 120° angle is obtuse because it’s wide and greater than 90°.
- In geometry, a ray is a line that has an endpoint on 1 side but not on the other.[2]
Place the center point of the protractor over the vertex of the angle. Look towards the bottom middle of your protractor. Some protractors have a small hole in the center, while others have a short vertical line. This center point on your protractor is called the origin. Simply place the origin at the vertex of the angle, or where the 2 lines meet and come to a point.[3]- Either set the hole over the vertex, or align it against the bottom of the vertical line.
Advertisement
Line 1 of the angle’s rays flush against the 0° measurement. To accurately measure your angle, 1 of the angle’s rays has to go through the 0° mark on your protractor. If your protractor isn’t already lined up against 1 ray, carefully turn it while keeping the origin over the vertex of the angle. Then, stop adjusting the protractor once the ray is straight and flush against the 0° line on the protractor.[4]- The 0° line is aligned with the origin of your protractor and starts from both the left and right sides.
- Some protractors have more than 1 straight, horizontal edge, which can make aligning it with a ray confusing. Just make sure the ray passes through 0° and not a different measurement.
- Follow the other ray up to the measurements on the protractor's arc. Use the scale measurements that are increasing in the direction that your angle is opening up in. If it’s an acute angle, make sure you’re looking at the measurements that are less than 90°. If your angle is obtuse, use the scale with measurements greater than 90°. The number that the ray passes through is your angle’s measurement in degrees.[5]
- In the above image, the angle opens up to the right and is acute. We know to use the scale on the inside because the measurements are increasing as you move towards the line and they’re less than 90°.
- If this angle opened from the left, you’d use the outer scale.
- If the line doesn’t extend past the protractor’s arc, lengthen it with a ruler. Or, line the edge of a piece of paper along the line.
- Protractors typically label measurements in 10s, but between each number are little lines that represent 1°. If your ray falls in between 2 whole numbers, like 50° and 60°, just count the lines to find your angle’s exact measurement.[6]
- The 2 measurement scales on the protractor makes this tool handy for measuring angles that open up from either direction.
- Draw a straight, horizontal line. Use a ruler or the straight edge of your protractor to draw your reference line, or the first ray of your angle. Make this line horizontal and any length you like.[7]
- The length of the line doesn’t matter.
- Place the hole or vertical line on your protractor at 1 end of the line. Choose whether you want to make the vertex of your angle, or the point where the 2 lines meet, at the left or right end of your horizontal line. Then, mark a small dot at the vertex point. Line the origin, or the center point, of your protractor over the vertex.[8]
- You don’t have to place the vertex at the end of the line. It can go anywhere on the line, but it is typically easier to use the end of the line.
- 3Straighten the horizontal line against the 0° mark on your protractor. Rotate your protractor carefully so the horizontal line is straight and flush against either 0° measurement. Then, make sure the origin of the protractor is still over the vertex of your line. This ensures that your angle is exact.[9]
- If your protractor has more than 1 straight edge, remember that the 0° line is aligned with the origin.
- Mark the angle degree you want to draw using the protractor's scale. Move up your protractor’s scale from 0° and find the measurement you want for your angle. If you’re drawing an acute angle, make sure you’re looking at the scale numbers that are less than 90°. If you’re drawing an obtuse angle, use the scale numbers that are greater than 90°. Then, simply draw a dot at the measurement.[10]
- In the above example, the angle is 60°.
- Draw the angle’s second ray from the point you marked to the vertex. Using a ruler, the flat edge of your protractor, or another straight edge, connect the vertex to the degree measurement you marked. You now have your second ray and a complete angle. Then, to verify that you drew the angle correctly, use your protractor to measure it.[11]
Community Q&A
- QuestionWhen do I use the outer scale of the protractor?
Community AnswerThe inner scale is for angles that open to the right and the outer scale of the protractor is used to measure angles that open to the left . - QuestionHow can I tell whether I need to use a larger or smaller protractor?Community AnswerThe angle on a protractor will always be the same.You may find it easier to have a small protractor when only drawing a small line from the angle you are measuring.
- QuestionWhy does the protractor have readings on both sides?
Community AnswerSo you can read angles form different directions. It's kind of like opposite/mirror images.
Tips
References
- ↑ https://youtu.be/nrFOrFPpn2o?t=10
- ↑ https://www.mathsisfun.com/definitions/ray.html
- ↑ http://www.mathopenref.com/printmeasureangle.html
- ↑ http://www.mathopenref.com/constmeasureangle.html
- ↑ https://youtu.be/_erF7VM5-zI?t=30
- ↑ https://youtu.be/nrFOrFPpn2o?t=290
- ↑ https://youtu.be/DdK-QrYdLfQ?t=258
- ↑ http://www.mathopenref.com/printdrawangle.html
- ↑ https://youtu.be/DdK-QrYdLfQ?t=276
- ↑ https://youtu.be/DdK-QrYdLfQ?t=286
- ↑ https://youtu.be/DdK-QrYdLfQ?t=294
- Videos provided by Math Mammoth
About This Article
You can use a protractor to measure and draw angles. To measure angles with a protractor, first place the center point along the bottom edge of the protractor over the vertex of the angle you're measuring. Line up the bottom edge of the protractor with one leg of the angle. Follow the other leg of the angle up to the protractor’s arc to see what number it intersects with and find the degree of the angle. If the angle is facing to the right, use the bottom row of numbers on the protractor. If the angle is facing left, use the top row of numbers. To draw an angle with a protractor, first place the center point along the bottom edge of the protractor where you want the vertex of the angle to be. Draw a small dot in the hole on the protractor to mark the vertex. Then, line the bottom edge of the protractor up with the vertex and draw a straight line along it. Now, find the hash mark on the protractor that corresponds with the angle you want to draw, and draw a small dot outside of it. Rotate the protractor and line the bottom edge up between the vertex and the small dot. Finally, use the bottom edge of the protractor as a straight edge to draw a line between the two points. Keep reading the article if you want to learn how to draw angles with your protractor!
Reader Success Stories
"Thank you so much! I'm just getting into drawing as a hobby and my tabletop drafting board came with a protractor, and I wanted to utilize it appropriately. It's been so long since I was in school, and this article reminded me how to use it! Stellar article and the pictures made it absolutely foolproof!"..." more
Did this article help you?
⚠️ Disclaimer:
Content from Wiki How English language website. Text is available under the Creative Commons Attribution-Share Alike License; additional terms may apply.
Wiki How does not encourage the violation of any laws, and cannot be responsible for any violations of such laws, should you link to this domain, or use, reproduce, or republish the information contained herein.
- - A few of these subjects are frequently censored by educational, governmental, corporate, parental and other filtering schemes.
- - Some articles may contain names, images, artworks or descriptions of events that some cultures restrict access to
- - Please note: Wiki How does not give you opinion about the law, or advice about medical. If you need specific advice (for example, medical, legal, financial or risk management), please seek a professional who is licensed or knowledgeable in that area.
- - Readers should not judge the importance of topics based on their coverage on Wiki How, nor think a topic is important just because it is the subject of a Wiki article.
