Download ArticleDownload ArticleThis article was co-authored by Meredith Juncker, PhD. Meredith Juncker is a PhD candidate in Biochemistry and Molecular Biology at Louisiana State University Health Sciences Center. Her studies are focused on proteins and neurodegenerative diseases.
There are 7 references cited in this article, which can be found at the bottom of the page.
This article has been fact-checked, ensuring the accuracy of any cited facts and confirming the authority of its sources.
This article has been viewed 353,974 times.
At some point, you may find that you need to determine the approximate temperature of water and do not have a waterproof thermometer. You can roughly figure out water’s temperature by looking for signs that indicate if it’s approaching boiling or freezing. You can also use your hand or your elbow to help gauge water temperature. Determining water temperature without a thermometer will not give you a precise degree of heat.
Steps
Hold your hand near the water. If you want to form a very rough idea of whether water is cold, lukewarm, or hot, first hold your hand above the water. If you feel heat radiate off of the water, it is hot and may burn you. If you feel no heat, the water will either be room-temperature or cold.- Do not stick your hand directly into water—either in a kitchen or in nature—without first holding your hand above it to gauge the temperature.
Dip your elbow in the water. If the water container is large enough, dip one of your elbows into the water. This will give you a rough idea of the water’s temperature. You’ll be able to instantly tell if the water is hot or cold.- Avoid putting your hand into water of an unknown temperature, as you could scald yourself.
Advertisement
Gauge the water temperature. If you leave your elbow in the water or 5–10 seconds, you’ll be able to form a rough idea of the water’s temperature. If the water feels slightly warm, but not hot, it’s around 100 °F (38 °C).[1]
Look for condensation on the water container. If your water is in a glass or metal container (such as a thermos or a saucepan) and you notice condensation beginning to form, you’ll know that the water is colder than the surrounding air.[2]- Roughly speaking, condensation will form more rapidly when the water is much colder than the air temperature.
- If you notice that condensation forms on the outside of a glass in 2 or 3 minutes, the water you’re dealing with is very cold.
Note if ice begins to form. If the water in question is very cold and beginning to freeze, you’ll notice that a small layer of ice has begun to form around the edges. Water that is beginning to freeze will be very near 32 °F (0 °C), although it may still be a couple of degrees warmer, in the range of 33 to 35 °F (1 to 2 °C).[3]- If you’re looking at a bowl of water in your freezer, for example, you’ll notice small pieces of ice starting to form where the water meets the side of the bowl.
Check if the water is frozen. This is an easy step that you can complete with a single glance. If the water is frozen (solid ice), its temperature is at or below 32 °F (0 °C).
Look for small bubbles as water begins to heat. If you’d like to have a reasonably precise idea of water’s temperature as it heats, watch the small bubbles that form on the bottom of the pan or pot. Very small bubbles indicate that the water is roughly 160 °F (71 °C).[4]- Bubbles at this low temperature are said to look like “shrimp eyes”—about the size of the head of a pin.
Watch for medium-sized bubbles. As the water continues to heat, the bubbles on the bottom will grow until they’re slightly larger than the “shrimp eye” size. This is a good indication that your heating water is nearing 175 °F (79 °C).[5]- Slight wisps of steam will also start to rise from the heating water as it reaches 175 °F (79 °C).
- Bubbles of this size are known as “crab eyes.”
Watch for larger, rising bubbles. The bubbles on the pot’s bottom will continue to grow in size, and eventually start rising to the top of the water. At this point, your water will be about 185 °F (85 °C). You can also tell when the water reaches 185 °F (85 °C) because you’ll be able to hear a slight rattling sound from the bottom of the pot.[6]- The first bubbles that begin to rise to the surface are about the size of “fish eyes.”
Look for the “string of pearls” phase. This is the final stage of heating water before it begins to fully boil. Larger bubbles from the bottom of the pot will begin to quickly rise to the surface, forming several continuous chains of rising bubbles. Water at this stage will be between 195 to 205 °F (91 to 96 °C).- Soon after the “string of pearls” phase, the water will reach 212 °F (100 °C) and come to a rolling boil.
Community Q&A
- QuestionHow do I know if the liquid I have is room temperature?
Community AnswerIf the liquid has been sitting in plain atmosphere unbiased by things such as air conditioning, heaters, refrigeration, etc., it should be room temperature.
Tips
- High altitude has an effect on the boiling point of water. While water normally boils at 212 °F (100 °C), at high altitudes it will boil at a lower temperature, 194 °F (90 °C), due to a decrease in atmospheric pressure.[7]Thanks
- If the water contains impurities, like salt, the boiling point will change. The more impurities the water has, the higher the temperature will need to be before the water will boil.Thanks
Warnings
- Never stick a finger or hand in water that is boiling or near boiling. You could badly burn yourself.Thanks
References
- ↑ http://www.nationwidechildrens.org/bathing-your-baby
- ↑ https://www.acs.org/content/acs/en/education/whatischemistry/adventures-in-chemistry/experiments/condenstation-station.html
- ↑ https://www.britannica.com/science/ice
- ↑ http://www.waterencyclopedia.com/Ge-Hy/Hot-Springs-and-Geysers.html
- ↑ https://asiasociety.org/education/science-boiling
- ↑ http://tea.slaughter.com/fish-eyes-in-your-kettle/
- ↑ https://www.fsis.usda.gov/food-safety/safe-food-handling-and-preparation/food-safety-basics/high-altitude-cooking
About This Article
If you need to check water temperature for yeast without a thermometer, adjust the faucet until the water feels very warm but not too hot on your wrist. At that point the water should be around 105° F (40° C), which will work great for most yeast. To check water temperature without a thermometer for tea, fill a pot with water and place it over high heat. Once tiny bubbles start to form on the bottom of the pot, you can estimate that the water is around 160° F (70° C). Once visible steam starts to rise from the pot, the water is around 170-180° F (75-80° C). When large bubbles start to gently break the surface of the water, it’s around 190° F (90° C). When strings of bubbles start rising to the surface, the water is 200° F (95° C). Finally, once the water is at a full boil, it’s close to 210° F (100° C). To learn how to see when water is beginning to freeze, keep reading!
Reader Success Stories
"I needed to know the estimate temperature for each method."
Did this article help you?
⚠️ Disclaimer:
Content from Wiki How English language website. Text is available under the Creative Commons Attribution-Share Alike License; additional terms may apply.
Wiki How does not encourage the violation of any laws, and cannot be responsible for any violations of such laws, should you link to this domain, or use, reproduce, or republish the information contained herein.
- - A few of these subjects are frequently censored by educational, governmental, corporate, parental and other filtering schemes.
- - Some articles may contain names, images, artworks or descriptions of events that some cultures restrict access to
- - Please note: Wiki How does not give you opinion about the law, or advice about medical. If you need specific advice (for example, medical, legal, financial or risk management), please seek a professional who is licensed or knowledgeable in that area.
- - Readers should not judge the importance of topics based on their coverage on Wiki How, nor think a topic is important just because it is the subject of a Wiki article.
