Download ArticleDownload ArticleThis article was co-authored by Pradeep Adatrow, DDS, MS. Dr. Pradeep Adatrow is the only board certified Dentist, Periodontist, and Prosthodontist in the southern United States. With over 15 years of experience, Dr. Adatrow specializes in dental implants, TMJ treatments, periodontal plastic surgery, surgical and non-surgical periodontics, bone regeneration, laser treatments, and soft tissue and gum graft procedures. He received a BS in Epidemiology and Biostatistics from the University of Alabama and earned his Doctor of Dental Surgery (DDS) degree from the University of Tennessee College of Dentistry. Dr. Adatrow then completed a three-year postgraduate program in periodontics and implantology at Indiana University and went on to complete another three-year postdoctoral program in advanced prosthodontics from the University of Tennessee. He also serves as a full-time professor and the Director of Surgical Prosthodontics at the University of Tennessee. Dr. Adatrow received the Dean's Junior Faculty Award and the John Diggs Faculty Award, and he was inducted into the Deans Odontological Society. He is board certified by the American Board of Periodontology and is a Fellow of the prestigious International College of Dentistry – a feat that only 10,000 others worldwide can claim.
This article has been fact-checked, ensuring the accuracy of any cited facts and confirming the authority of its sources.
This article has been viewed 637,781 times.
Mouth guards are an important piece of equipment in football, soccer, basketball, and many contact sports.[1] Custom-fitting the rubber against your teeth makes the experience of wearing one much safer and more comfortable. The whole process doesn't take more than a few seconds. See Step 1 for more information.
Steps
Download Article
Gather the necessary materials. To properly fit your mouthguard, you'll need:- your mouthguard
- scissors
- enough boiling water to submerge the mouthguard in
- a bowl of ice water
- a towel
Trim the mouthguard for length. You may need to trim the ends to make sure your mouthguard fits comfortably and doesn't irritate the back of your mouth. Put it in before you fit it and trim a bit off the ends if necessary. If it pokes into your mouth at the back of your jaw, or causes you to gag, trim off a little using scissors.- A mouthguard is mostly used to protect your vulnerable front teeth, not your molars, so you've got some wiggle-room as far as the back of the mouthguard goes. Some athletes prefer a more comfortable and short guard that covers the teeth as far as the first molars. Do what's comfortable.
Advertisement- Submerge the mouthguard in boiling water. You need enough boiling water to submerge the mouthguard in it for between 30 and 60 seconds. Start a small pot of boiling water on the stove, or boil some in the microwave.
- Holding the mouthguard carefully by the end strap, submerge it in the water and let it soften. If your mouthguard doesn't have a strap, or you already cut it off, you can just drop it in the water and retrieve it with a slotted spoon.
- If you have braces, or other dental prosthetics, boil the water for only around 30 seconds. You want the mouthguard to fit your mouth, but not to fill in the crannies around your braces, which can damage them.
- Remove the mouthguard carefully. Quickly blot the mouthguard on the towel and get it into your mouth, adjusting it against your upper teeth. It won't be uncomfortably hot.
- Using your thumbs, push the mouth guard up and back against your molars. Bite down firmly to get the impression of your teeth on the bottom of the mouthguard and suck the guard against your top teeth.[2]
- Place your tongue against the roof of the mouth to create pressure and achieve a tight fit around your teeth. This shouldn't take more than 15 or 20 seconds.
- Don't chew the mouthguard or move it around in your mouth while you're fitting it.
- Place the mouthguard in the ice water. Remove the mouthguard and dunk it in the ice water. Let it cool for a minute or two and try the fit. It should fit snugly against your top teeth without having to hold it with your tongue, and it should fit naturally into your bottom teeth.
- If you want to cut off the strap, you can do so now, or remove the removable strap.
- If it feels uncomfortable or ill-fitting, try it again until you get a proper fit.
Expert Q&A
- QuestionHow do you store a mouthguard in between uses?
Pradeep Adatrow, DDS, MSDr. Pradeep Adatrow is the only board certified Dentist, Periodontist, and Prosthodontist in the southern United States. With over 15 years of experience, Dr. Adatrow specializes in dental implants, TMJ treatments, periodontal plastic surgery, surgical and non-surgical periodontics, bone regeneration, laser treatments, and soft tissue and gum graft procedures. He received a BS in Epidemiology and Biostatistics from the University of Alabama and earned his Doctor of Dental Surgery (DDS) degree from the University of Tennessee College of Dentistry. Dr. Adatrow then completed a three-year postgraduate program in periodontics and implantology at Indiana University and went on to complete another three-year postdoctoral program in advanced prosthodontics from the University of Tennessee. He also serves as a full-time professor and the Director of Surgical Prosthodontics at the University of Tennessee. Dr. Adatrow received the Dean's Junior Faculty Award and the John Diggs Faculty Award, and he was inducted into the Deans Odontological Society. He is board certified by the American Board of Periodontology and is a Fellow of the prestigious International College of Dentistry – a feat that only 10,000 others worldwide can claim.
Board Certified Dentist & Oral SurgeonTo store your mouthguard effectively between uses, selecting the appropriate container is essential. Choose one with ventilation to facilitate drying, or if you opt for a closed container, ensure it is clean and dry before placing the mouthguard inside. You can clean your mouthguard with a toothbrush and mild soap followed by rinsing with cold water and air drying it after every use. Store the container in a dry location away from direct sunlight and excessive heat, as high temperatures can alter the mouthguard's material. Additionally, perform regular inspections of your mouthguard for any signs of wear, tears, or alterations in shape. Replacing the mouthguard when you detect such issues is crucial to maintain both its hygiene and function. - QuestionDo I have to use a new mouth guard, or can I use one I haven't used in a while if I fit it with the steps in the article?
Community AnswerYou should get a new one. An old one will not mould well to your teeth as it will likely be dry and cracked. - QuestionWhat happens if I chew the mouth guard? Do I need to get a new one?
Community AnswerIf you chew the mouth guard, it will become unable to fit your teeth, and you will most likely need a new one.
Video
Reader Videos
Tips
- Talk to your orthodontist for instructions if you're worried about your braces.[3]Thanks
- If the guard is too large for your mouth, try cutting it before you boil it. If you have to cut it afterwards, it might have sharp edges that irritate your mouth. If you really have to cut the guard after the boiling and fitting process, then boil the edges again for a short time and try to smoothen them out in your mouth.Thanks
- It doesn't matter which type of Mouth Guard you are using. These steps should work with most brands.Thanks
Tips from our Readers 
- If the Mouth Guard feels too loose after you fit it for the first time, submerge it in the water again for 5 seconds. Then, take it back out and slightly push in the walls around the Mouth Guard with your thumbs and fingers. Once you submerge it in the cold water, the Mouth Guard should fit snugly.
- Consider only putting in enough water to submerge the Mouth Guard. That way, there is no danger of melting the Mouth Guard strap.
Warnings
- Do not boil the mouthguard for too long. It might lump together when you pull it out of the water and your guard will be ruined.Thanks
- Blot the mouthguard first before putting it in your mouth to avoid burning your tongue on the water.Thanks
Expert Interview
Thanks for reading our article! If you’d like to learn more about fitting mouth guards, check out our in-depth interview with Pradeep Adatrow, DDS, MS.
References
About This Article
Medical Disclaimer
The content of this article is not intended to be a substitute for professional medical advice, examination, diagnosis, or treatment. You should always contact your doctor or other qualified healthcare professional before starting, changing, or stopping any kind of health treatment.
To fit a mouth guard, start by putting it in your mouth and trimming any excess material off of the ends of the guard. Then, submerge the guard in boiling water for 30-60 seconds to soften the plastic. Remove the guard carefully from the water with a slotted spoon, and then put it in your mouth. Use your thumbs to push the guard against your back molars, and bite down firmly for 15-20 seconds to get a good fit. Remove the guard from your mouth and place it in a bowl of cold water for 1-2 minutes to solidify the plastic. If you want to learn how to position the guard in your mouth with your tongue, keep reading!
Reader Success Stories
"I just started sparring and my mouth guard has instructions, but it wasn't totally clear. I looked up how to fit a mouth guard and this article was really helpful."..." more
Did this article help you?
⚠️ Disclaimer:
Content from Wiki How English language website. Text is available under the Creative Commons Attribution-Share Alike License; additional terms may apply.
Wiki How does not encourage the violation of any laws, and cannot be responsible for any violations of such laws, should you link to this domain, or use, reproduce, or republish the information contained herein.
- - A few of these subjects are frequently censored by educational, governmental, corporate, parental and other filtering schemes.
- - Some articles may contain names, images, artworks or descriptions of events that some cultures restrict access to
- - Please note: Wiki How does not give you opinion about the law, or advice about medical. If you need specific advice (for example, medical, legal, financial or risk management), please seek a professional who is licensed or knowledgeable in that area.
- - Readers should not judge the importance of topics based on their coverage on Wiki How, nor think a topic is important just because it is the subject of a Wiki article.
