Download ArticleDownload ArticleThis article was co-authored by Meredith Juncker, PhD. Meredith Juncker is a PhD candidate in Biochemistry and Molecular Biology at Louisiana State University Health Sciences Center. Her studies are focused on proteins and neurodegenerative diseases.
There are 7 references cited in this article, which can be found at the bottom of the page.
This article has been viewed 369,829 times.
Net ionic equations are an important aspect of chemistry as they represent only the entities that change in a chemical reaction. They are most commonly used in redox reactions, double replacement reactions, and acid-base neutralisations.[1] There are three basic steps to writing a net ionic equation: balancing the molecular equation, transforming to a complete ionic equation (how each species exists in solution), and then writing the net ionic equation.
Steps
Know the difference between molecular and ionic compounds. The first step in writing a net ionic equation is identifying the ionic compounds of the reaction. Ionic compounds are those that will ionize in an aqueous solution and have a charge.[2] Molecular compounds are compounds that never have a charge. They are made between two non-metals and are sometimes referred to as covalent compounds.[3]- Ionic compounds can be between metals and nonmetals, metals and polyatomic ions, or multiple polyatomic ions.
- If you are unsure of a compound, look up the elements of the compound on the periodic table.[4]
- Net ionic equations apply to reactions involving strong electrolytes in water.[5]
Identify the solubility of a compound. Not all ionic compounds are soluble in an aqueous solution and therefore, will not dissociate into individual ions. You must identify the solubility of each compound before proceeding with the rest of the equation. Below is a brief summary of the rules of solubility. Seek out a solubility chart for more details and exceptions to these rules.- Follow these rules in the order stated below:
- All Na+, K+, and NH4+ salts are soluble.
- All NO3-, C2H3O2-, ClO3-, and ClO4- salts are soluble.
- All Ag+, Pb2+, and Hg22+ salts are insoluble.
- All Cl-, Br-, and I- salts are soluble.
- All CO32-, O2-, S2-, OH-, PO43-, CrO42-, Cr2O72-, and SO32- salts are insoluble (with some exceptions).
- All SO42- salts are soluble (with some exceptions).
Advertisement
Determine the cation and anion in a compound. Cations are the positive ions in a compound and are generally the metals. Anions are the negative, non-metal ions in the compound. Some non-metals are capable of forming cations, but metals will always form cations.[6]- For example, in NaCl, Na is the positively charged cation because it is a metal while Cl is the negatively charged anion because it is a non-metal.
Recognize polyatomic ions in the reaction. Polyatomic ions are charged molecules that are bound so tightly together that they do not dissociate during chemical reactions.[7] It is important to recognize polyatomic ions as they have a specific charge and do not break down into their individual components. Polyatomic ions can be both positively and negatively charged.- If you are in a standard chemistry course, you will likely be expected to memorize some of the most common polyatomic ions.
- Some common polyatomic ions include CO32-, NO3-, NO2-, SO42-, SO32-, ClO4-, and ClO3-.[8]
- There are many more and can be found in tables in your chemistry book or online.
Balance the complete molecular equation. Before writing a net ionic equation, you must first make sure your starting equation is completely balanced. To balance an equation, you add coefficients in front of compounds until there is an equal number of atoms for each element on both sides of the equation.- Write the number of atoms that comprise each compound on either side of the equation.
- Add a coefficient in front of elements that are not oxygen and hydrogen to balance each side.
- Balance the hydrogen atoms.
- Balance the oxygen atoms.
- Re-count the number of atoms on each side of the equation to make sure they are equal.
- For example, Cr + NiCl2 --> CrCl3 + Ni becomes 2Cr + 3NiCl2 --> 2CrCl3 + 3Ni.
Identify the states of matter of each compound in the equation. Oftentimes, you will be able to identify keywords in a problem that will tell you the state of matter for each compound. There are some rules to help you determine the state of an element or compound.- If no state is provided for an element, use the state found on the periodic table.
- If a compound is said to be a solution, you can write it as aqueous, or (aq).
- If there is water in the equation, determine whether or not the ionic compound will dissolve using a solubility table. If it has high solubility, the compound will be aqueous (aq), if it has low solubility, it will be solid (s).
- If there is not water, the ionic compound is a solid (s).
- If the problem mentions an acid or a base, they will be aqueous (aq).
- For example, 2Cr + 3NiCl2 --> 2CrCl3 + 3Ni. Cr and Ni in their elemental forms are solids. NiCl2 and CrCl3 are soluble ionic compounds, therefore, they are aqueous. Rewritten, this equation becomes: 2Cr(s) + 3NiCl2(aq) --> 2CrCl3(aq) + 3Ni(s).
Determine what species will dissociate (separate into cations and anions) in solution. When a species or compound dissociates, it separates into its positive (cation) and negative (anion) components. These will be the components that get balanced at the end for the net ionic equation.- Solids, liquids, gases, molecular compounds, low solubility ionic compounds, polyatomic ions, and weak acids will not dissociate.
- The oxides and hydroxides with alkali or alkaline earth metals will dissociate completely.
- High solubility ionic compounds (use solubility table) and strong acids will ionize 100% (HCl(aq), HBr(aq), HI(aq), H2SO4(aq), HClO4(aq), and HNO3(aq)).[9]
- Keep in mind, although polyatomic ions do not dissociate further, if they are a component of an ionic compound they will dissociate from that compound.
Calculate the charge of each dissociated ion. Remember that metals will be the positive cation, while non-metals will be the negative anion. Using the group number on the periodic table to determine which element will have which charge. You must also balance the charges of each ion within the compound.- In our example, NiCl2 dissociates into Ni2+ and Cl- while CrCl3 dissociates into Cr3+ and Cl-.
- Ni has 2+ charge because Cl has a minus charge, but there are 2 atoms of it. Therefore, it must balance the 2 negative Cl ions. Cr has a 3+ charge because it must balance the 3 negative Cl ions.
- Remember that polyatomic ions have their own specific charge.
Re-write the equation with the soluble ionic compounds broken down into their individual ions. Anything that will dissociate or ionize (strong acids) will simply separate into its two distinct ions. The state of matter will remain (aq), but you must ensure the equation remains balanced.- Solids, liquids, gasses, weak acids, and low solubility ionic compounds will not change state or separate into ions. Simply leave them as they are.
- Molecular substances will simply disperse in solution, so their state will change to (aq). Three exceptions that do not become (aq) are: CH4(g), C3H8(g), and C8H18(l).
- Continuing our example, the total ionic equation looks like this: 2Cr(s) + 3Ni2+(aq) + 6Cl-(aq) --> 2Cr3+(aq) + 6Cl-(aq) + 3Ni(s). When Cl is not in a compound, it is not diatomic; therefore, we multiplied the coefficient by the number of atoms in the compound to get 6 Cl ions on both sides of the equation.
Remove the spectator ions by canceling out identical ions on each side of the equation. You can cancel only if they are 100% identical on both sides (charges, subscripts, etc.). Rewrite the action without any of the canceled species.- Spectator ions do not participate in the reaction, but they are present.
- Finishing the example, there are 6Cl- spectator ions on each side that can be canceled out. The final net ionic equation is 2Cr(s) + 3Ni2+(aq) --> 2Cr3+(aq) + 3Ni(s).
- To do a check to see if your answer works, the total charge on the reactant side should equal the total charge on the product side in the net ionic equation.
Expert Q&A
- QuestionHow to know the charge on the compound when an acid is dissociated in water such as H3PO4 in different steps?
Meredith Juncker, PhDMeredith Juncker is a PhD candidate in Biochemistry and Molecular Biology at Louisiana State University Health Sciences Center. Her studies are focused on proteins and neurodegenerative diseases.
Scientific ResearcherH3PO4 is a triprotic acid, meaning it can undergo three dissociations and as such will have three dissociation constants (Ka1, Ka2, Ka3). So the charge on H3PO4 will change as each hydrogen ion dissociates in solution. - QuestionNet ionic equation for zinc sulfide and hydrochloric acidMeredith Juncker, PhDMeredith Juncker is a PhD candidate in Biochemistry and Molecular Biology at Louisiana State University Health Sciences Center. Her studies are focused on proteins and neurodegenerative diseases.
Scientific ResearcherThis is a double-displacement reaction with ZnCl2 and H2S as products. ZnS(aq) + 2HCl(aq) --> ZnCl2(aq) + 2H2S(g)The net ionic equation is: 2H+ + S2- --> 2H2S - QuestionWhy can't weak acids dissociate?
Community AnswerWeak acids do dissociate but minimally because of their very low solubility. Their solubility is usually written as >50%.
Tips
- Include all states of matter for every species in all equations. You will lose some marks if you don't.Thanks
References
- ↑ http://www.chemteam.info/Equations/Net-Ionic-Equation.html
- ↑ http://www.chemteam.info/Equations/Net-Ionic-Equation.html
- ↑ http://www.chemteam.info/Equations/Net-Ionic-Equation.html
- ↑ http://www.ptable.com/
- ↑ https://www.thoughtco.com/net-ionic-equation-in-chemistry-604575
- ↑ http://study.com/academy/lesson/cation-definition-examples-quiz.html
- ↑ https://antoine.frostburg.edu/chem/senese/101/compounds/polyatomic.shtml
- ↑ https://antoine.frostburg.edu/chem/senese/101/compounds/polyatomic.shtml
- ↑ http://www.chemteam.info/AcidBase/Strong-Weak-AcidBase.html
About This Article
To write a net ionic equation, you’ll need to start by balancing the equation. Write the number of atoms in the compounds on each side of the equation, then add coefficients in front of the atoms on each side until they’re equal. Start with all of the atoms that aren’t hydrogen or oxygen, then balance the hydrogen and oxygen atoms. For example, say you want to balance the equation C+CO2 → CO. Since there are 2 carbon atoms and 2 oxygen atoms on the reactant side, you’ll need to add the coefficient 2 on the product side. The balanced equation will look like C+CO2 → 2CO. When you’re done, re-count all of the atoms on each side to make sure they’re equal. Next, make note of the states of matter of each compound—are they aqueous (or liquid), solid, or gas? If you’re doing a word problem, look for keywords that explain the different states. For instance, a compound that’s described as “in solution” is aqueous. Write the state as aq, s, or g in parentheses after each compound. Then, determine which compounds in your equation will dissociate, or separate into positive and negative components, called cations and anions. For instance, a compound that is made up of an oxide or hydroxide and an alkali or alkaline earth metal will completely dissociate in solution. Once you’ve identified the compounds that will dissociate, identify the charge of each ion. Metals will become positive cations, while non-metals will dissociate into negative anions. For example, 2CrCl3 would dissociate into Cr3+ + 3Cl-. The single Cr atom has 3 positive ions to balance out the negative ions of the 3 Cl atoms. Rewrite the whole equation with each dissociated compound written out this way. Finally, cross out any ions that appear exactly identical on both sides of the equation. Those are called “spectator ions.” Check your work by making sure that the total charge on the reactant side is equal to the total charge on the product side. If so, you’ve successfully written a net ionic equation. To learn what the different components of an ionic equation mean, read on!
Reader Success Stories
"Very systematically laid out. Easy to understand. Detailed, but not too detailed. I already started using it to guide my Chemistry students! Thank you very much."..." more
Did this article help you?
⚠️ Disclaimer:
Content from Wiki How English language website. Text is available under the Creative Commons Attribution-Share Alike License; additional terms may apply.
Wiki How does not encourage the violation of any laws, and cannot be responsible for any violations of such laws, should you link to this domain, or use, reproduce, or republish the information contained herein.
- - A few of these subjects are frequently censored by educational, governmental, corporate, parental and other filtering schemes.
- - Some articles may contain names, images, artworks or descriptions of events that some cultures restrict access to
- - Please note: Wiki How does not give you opinion about the law, or advice about medical. If you need specific advice (for example, medical, legal, financial or risk management), please seek a professional who is licensed or knowledgeable in that area.
- - Readers should not judge the importance of topics based on their coverage on Wiki How, nor think a topic is important just because it is the subject of a Wiki article.
