Why Is My Antenna Not Picking Up Channels?

Download ArticleDownload Article

Have you installed a TV antenna and wonder why it's not working? In 2009, the US switched all broadcasts to digital signals (2012 for Britain), so if you have an analog antenna, you won't get any channels.[1] This How.com.vn will teach you how to fix issues that cause your antenna not to pick up channels.

HDTV Antenna Troubleshooting

If your antenna isn't picking up local channels, try moving the external antenna (if you have one). If you don't have an external antenna, try moving your internal antenna to get over or around things that are blocking the signal.

  1. How.com.vn English: Step 1 Your external antenna (if you have one) may have fallen or shifted.
    Since even a slight change in position or angle can have a big impact on your reception, make sure your external antenna (if you have any) has not been re-oriented by wind, rain, or storms.[2]
  2. How.com.vn English: Step 2 Your antenna may not be high enough.
    If things like trees, hills, or buildings are between you and the broadcasting tower, then the signal might be interrupted and unable to reach your antenna, which would cause you not to see any stations.[3]
    Advertisement
  3. How.com.vn English: Step 3 Your flat (indoor) antenna could be in a bad location.
    Certain areas like skylights or on outside-facing walls seem to be the best places to put these antennae so they aren't covered up with dust or blocked by knickknacks.
  4. How.com.vn English: Step 4 There may have too many splitters.
    If you have a splitter or multiple connections to your antenna cable, you could be weakening the signal too much. Disconnect the splitter and run the cable directly to your TV or converter box.[4]
  5. How.com.vn English: Step 5 Your TV's digital tuner could be broken, faulty, or going bad.
    This is a little more uncommon, but your TV's digital tuner could be faulty, even if it's new. Try using your antenna with another TV; if it works on that TV, then your other TV's digital tuner is probably broken.
  6. How.com.vn English: Step 6 The station's frequency may have changed.
    Go to https://www.fcc.gov/media/engineering/dtvmaps and enter your address to find the stations broadcasting near you. Click the station's callsign (like WJKT or WBBJ-TV) and more information will expand down to reveal the station's RF channel and repacked channel (if there is one).
    • Older TVs (like the 2008 Sony Bravia) need to tune to the station's RF channel while newer TVs will get the signal when you tune to the repacked channel.
    • TV stations move locations, channels, and sometimes change their transmitter power, so it's a good idea to re-scan every once in a while.[5]
  7. How.com.vn English: Step 7 The station's transmitter tower might be using lower power.
    Sometimes a station might use lower power while they upgrade their equipment. Go to https://www.fcc.gov/media/television/tv-query and enter the station's callsign (call letters, like "WJKT") and hit the Enter or Return key on your keyboard.
    • If you see "Special Temporary Authority" in red, the station is temporarily operating at reduced power.
  8. How.com.vn English: Step 8 The amplifier on your antenna may be faulty.
    A bad amplifier can cause choppy or glitchy reception on your TV. Try removing the amplifier from your antenna and use the antenna directly with your TV without the amplifier. If you get better reception, then you know your amplifier is bad.
    • You'll know your antenna uses an amplifier if it requires power. If it doesn't, your antenna does not have an amplifier.
  9. How.com.vn English: Step 9 Your cables may be loose.
    If you have loose cables, you'll most likely get no signal or a spotty signal. So make sure your connections are tight at your TV and your antenna.
    • While you're checking your connections, also take a look at your cables to make sure they aren't bent, looped, or otherwise broken.
  10. Advertisement


Community Q&A

Search
Add New Question
  • Question
    Local tv station has 7 sub channels, but I can only pick up 6 even after a rescan.
    How.com.vn English: How.com.vn Staff Editor
    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
    How.com.vn English: How.com.vn Staff Editor
    How.com.vn Staff Editor
    Staff Answer
    Your antenna may be blocked by a tree or some building if it's between you and the broadcast station/tower. Your antenna might also be pointed in the wrong direction; the article lists a website that you can use to determine where the signal is coming from (that you can't get) and you'll have to reposition your antenna accordingly. Finally, you may be too far from the station transmitting the channel and might not be receiving it.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!

      About This Article

      How.com.vn English: Darlene Antonelli, MA
      Written by:
      How.com.vn Technology Writer
      This article was co-authored by How.com.vn staff writer, Darlene Antonelli, MA. Darlene Antonelli is a Technology Writer and Editor for How.com.vn. Darlene has experience teaching college courses, writing technology-related articles, and working hands-on in the technology field. She earned an MA in Writing from Rowan University in 2012 and wrote her thesis on online communities and the personalities curated in such communities. This article has been viewed 157,130 times.
      How helpful is this?
      Co-authors: 4
      Updated: April 9, 2024
      Views: 157,130
      Categories: Antennas
      Article SummaryX

      1. Your external antenna (if you have one) may have fallen down or shifted.
      2. Your antenna may not be high enough.
      3. Your flat (internal) antenna is in a bad location.
      4. There are too many splitters set up.
      5. Your TV's digital tuner could be broken, faulty, or going bad.
      6. The station's frequency may have changed.
      7. The station's transmitter tower is temporarily using lower power.
      8. The amplifier on your antenna is bad.
      9. Your cables are loose.

      Did this summary help you?

      Thanks to all authors for creating a page that has been read 157,130 times.

      Is this article up to date?

      ⚠️ Disclaimer:

      Content from Wiki How English language website. Text is available under the Creative Commons Attribution-Share Alike License; additional terms may apply.
      Wiki How does not encourage the violation of any laws, and cannot be responsible for any violations of such laws, should you link to this domain, or use, reproduce, or republish the information contained herein.

      Notices:
      • - A few of these subjects are frequently censored by educational, governmental, corporate, parental and other filtering schemes.
      • - Some articles may contain names, images, artworks or descriptions of events that some cultures restrict access to
      • - Please note: Wiki How does not give you opinion about the law, or advice about medical. If you need specific advice (for example, medical, legal, financial or risk management), please seek a professional who is licensed or knowledgeable in that area.
      • - Readers should not judge the importance of topics based on their coverage on Wiki How, nor think a topic is important just because it is the subject of a Wiki article.

      Advertisement