Can You Repair Car Roof Upholstery Yourself? Your Top Questions Answered

If you’re dealing with saggy, droopy car roof upholstery, or headliner, you’re definitely not alone. Don’t worry—this car repair isn’t very expensive, and better yet, it doesn’t require a lot of mechanical or engineering knowledge. While it’s always best to talk to a professional upholsterer, you may have a few at-home options at your disposal. Scroll through some frequently-asked questions and answers to get the low-down on this type of car repair.

Question 1

What causes headliner to sag?

Download Article

Your car’s headliner is actually made with 2 different materials—polyurethane, a foam-like layer that goes directly over your car ceiling, and a layer of fabric that goes on top of the polyurethane.^{[1]XResearch source} This headliner stays in place with an adhesive; over time, as the glue breaks down, the headliner starts to droop and sag off your car’s ceiling.^{[2]XResearch source} Typically, car headliner starts to sag after 10-15 years.^{[3]XResearch source}

Question 2

How can I fix my headliner without removing it?

Download Article

1
Glue the edges and sides back into place with a spray adhesive. If your headliner is sagging along the edge of your car ceiling, a quick touch of glue can do the trick. Spray the loose, peeling underside of the headliner with the adhesive, along with the exposed section of ceiling. Wait 5 minutes for the glue to get tacky, and then press the material back into place.^{[4]XResearch source}
- Some people like to spray on 2 coats of adhesive for extra security.^{[5]XResearch source}
Stick 1 section of double-side tape along the peeling underside of the headliner. Then, stick the tape onto your car’s roof. This is an easy fix for any peeling sections along the edges of your headliner.^{[6]XResearch source}
If your headliner is sagging badly, you’re better off replacing it altogether. However, if you’re in a rush, stick a couple of pins through the drooping material to hold it in place.^{[7]XResearch source}

Question 3

What is the best glue to use on a headliner?

Download Article

A high-temperature adhesive spray is best. Spray glue is easy to apply in an even layer, and helps your headliner stick firmly to the backing board. Professionals recommend using a high-temperature adhesive—about 2 cans are enough for a standard sedan, but you might need more if you’re repairing a larger vehicle.^{[8]XResearch source}
- Professionals recommend using 3M-brand “hi-tack” adhesive spray for headliner repairs. You can also use an adhesive spray designed specifically for car headliners, too.^{[9]XResearch source}

Question 4

What if my headliner is sagging in the center?

Download Article

Unfortunately, there’s no quick or handy way to re-glue the center of your headliner onto the backing board.^{[10]XResearch source} Instead, you’ll need to remove the headliner completely and replace it with new fabric.^{[11]XResearch source}

Question 5

How do I remove the fabric from my car ceiling?

Download Article

Sun visors, grab handles, car lights, and other accessories are typically attached to the top and upper sides of your car. Before removing the headliner and backing board, unscrew all these attachments and set them aside for later. Depending on your vehicle, you may need an electric drill, pliers, screwdrivers, and/or a hex tool socket kit to remove these accessories.^{[12]XResearch source}
2
Pull down the plastic pillars and sills. Find 4 plastic “pillars,” or sections of plastic layered over your car’s headliner, along the front and back of your vehicle. Remove any plugs or screws holding these pillars in place.^{[13]XResearch source} Then, pull off any sills, or rubber strips, along the sides of your car doors.^{[14]XResearch source}
- You don’t have to remove the pillars! The pillars only cover about 1 in (2.5 cm) of the headliner material—so, you can shift and pull out the old headliner without detaching them completely.^{[15]XResearch source}
Grip the headliner and backing board with both hands, removing them completely from the top of the car. Open up multiple car doors, so it’s easy to slide the backing board and headliner out.^{[16]XResearch source}

Question 6

Do I need to do anything else once the headliner is removed?

Download Article

Disconnect any wires and sunglasses cases. Flip the backing board over and place it on a flat surface. Unscrew any wires still attached to the board, setting them aside for later. Additionally, unscrew and remove any sunglasses cases from the headliner—these are pretty fragile, and will likely break if you leave them attached.^{[17]XResearch source}
- Always reattach these screws, wires, and cases before placing your headliner and backing board back in the car.

Question 7

What type of replacement fabric should I use?

Download Article

Flat-knit and velour fabrics are both great options. Flat-knit headliners have a “stitched” design, while velour materials are softer to the touch. Both of these materials come attached to a layer of foam, which goes directly on the backing board.^{[18]XResearch source}
- These fabrics come in different colors—feel free to pick one that matches your car’s interior.
- You can find headliner fabric at specialty shops, or at stores that sell auto supplies or fabrics, like Walmart and Hobby Lobby. It typically costs over $10 per yard.

Question 8

How do I replace the car roof upholstery?

Download Article

Don’t try to salvage the old material; instead, just remove the headliner fabric. The foam might be stuck to the backing board, which is perfectly normal.^{[19]XResearch source}
2
Remove the foam from the headliner board. Grab a bristled brush and scrub off the old foam. Clear away the foam completely, so the backing board is completely bare. Then, smooth away any raised sections or imperfections on the backing board with a sander.^{[20]XResearch source}
- An air blower or air hose can help with this.
3
Glue a new section of fabric in place. Spray down the entire backing board with adhesive glue, as well as the underside of the new headliner material.^{[21]XResearch source} Wait 5 minutes, so the glue gets nice and sticky.^{[22]XResearch source} Use your hands to press and smooth the headliner over all the contours and raised sections of the backing board, so the material looks seamless and wrinkle-free. Then, let the glue dry and cure completely.^{[23]XResearch source}
- Check your glue can for more specific drying and curing guidance.

Question 9

How do I reinstall my new upholstery?

Download Article

Grab a razor blade and work your way around the new headliner material. Carefully cut around any sections where car accessories go, like your interior lights, grab handles, and sun visors. These sections appear slightly raised beneath the material and are easy to locate and cut out.^{[24]XResearch source}
Then, reattach and secure any sills, pillars, and side accessories that you originally removed from the vehicle.^{[25]XResearch source}
Spray down your new headliner with a foaming spray cleaner. This keeps your new material sleek and fresh without actually staining the headliner.^{[26]XResearch source}

Question 10

How much does it cost to repair your headliner?

Download Article

If you’re getting the repair done at an auto dealership, the repair can cost anywhere between $650 and $850. Don’t worry—if you’re completing the repair yourself, the supplies only cost around $50 to $55, depending on what type of vehicle you have.^{[27]XResearch source}

Expert Q&A

Search

Add New Question

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

Your upholstery should lose any imperfections once it sits in a warm car for a few days. If you notice any major blemishes, get rid of them with an upholstery skewer.^{[28]XResearch source}
Thanks
Helpful0 Not Helpful0

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!