How to Paint on Plastic

Plastic is a tricky surface to paint. Unlike wood, plastic is not porous, so the paint has little to stick to. With the right amount of preparation, however, you can paint plastic with success. Keep in mind, however, that depending on the type of paint and plastic you are working with, the paint may eventually chip off, especially after heavy or frequent use.

Part 1

Part 1 of 3:

Preparing the Surface

Download Article

With the right preparation, you can paint just about anything. Items such as furniture, figurines, toys, containers, and décor items are great choices.
Not every plastic surface is suitable, including: plastic/laminate floors, bathtubs/shower stalls, or counters.
This will remove any surface dirt and reduce the amount of work you have to do in later steps. Use a soft cloth or sponge for smooth surfaces, and a scrubbing brush for textured surfaces (such as patio furniture). Rinse the item with fresh water afterwards, then dry it off.^{[1]XResearch source}
Advertisement
3
Lightly buff the surface with 220 to 300-grit sandpaper. Use a light touch and a circular motion to avoid scratches. When you are done, wipe the surface down with a tack cloth.^{[2]XResearch source}
- Sanding is important. It gives smooth surfaces some tooth, allowing the paint to stick on better
This step is very important, as it will remove any oils that might prevent the paint from sticking. If you don't do this, the paint is more likely to chip off later.^{[3]XResearch source}
Handle the plastic carefully. Hold the item by the edges or wear disposable gloves.
This would be a good idea even if you will be painting the item with a brush. The masking tape will help give you a clean, defined line between the painted and unpainted areas.
6
Apply a coat of primer. You’ll need to apply a coat of primer, preferably one that bonds well. This will help even out the surface of the plastic and give the paint something to stick to. The spray-on kind would be the easiest to use, but you can get the brush-on kind as well.
- Let the primer dry completely before proceeding.
- If you are using a spray-able primer, be sure to cover your work surface and work in a well-ventilated area.
Sanding prevents paint issues on slick surfaces. "I sell decorative items made from shiny plastic. Customers often want to paint them, but I worried the paint would peel. This confirmed sanding first is vital for glossy plastics to avoid issues like runs and orange peel texture." - Jean E.
A reliable guide to share with DIYers. "As a retailer of plastic products meant for DIY painting, I'm often asked for advice. Linking to this comprehensive guide on prepping and painting plastic has been invaluable. Now I can confidently refer customers to these techniques for long-lasting results." - Stig F.
Learned special primers are best for plastic. "I needed to paint a plastic tub but wasn't sure how to start. This taught me to use an auto primer first since regular primer doesn't always bond plastic well. That specific tip on primer made a big difference in getting the paint to stick." - Gene M.
Gave new life to a thrifted find. "I bought a dark plastic vanity mirror from a thrift store. After reading, I sanded the frame, wiped it with alcohol, and spray painted it white. Following the steps properly helped the paint adhere smoothly so I could give the mirror a whole new life!" - Annette S.
Perfect primer for my next classroom project. "As an elementary art teacher, I'm planning a lesson on painting plastic objects. This article covers everything I need to know about properly prepping different plastic items, applying paint, and even adding sealant to extend the life of these projects." - Charlee G.
We want to hear from you! Advice from our readers makes our articles better. If you have a story you’d like to share, tell us here.

Part 2

Part 2 of 3:

Painting the Surface

Download Article

1
Set up your workspace. Choose an area with good lighting. Cover your work surface with newspaper or a cheap, plastic, tablecloth. If you will be working with spray paint, it would be best if you work in a well-ventilated area; outside would be best.^{[4]XResearch source}
- If there are any places on your plastic you do not wish to paint, cover them in painter's tape.
Spray paint works especially well for plastic, but you can use acrylic or enamel/model paint as well. It would be even better if the paint is meant for plastic. Check the label, and look for words such as: "Plastic" or "Multi-Surface."
3
Prepare the paint, if needed. Some types of paint come ready to use, while others require a little bit of preparation. Before you begin painting, check the label on your can or bottle of paint for any specific instructions.
- Shake spray paint cans for a few minutes. This will ready the paint to spray, mixing it and giving you a smoother application.
- Thin acrylic paint with enough water to give it the consistency of creamer. This will give you a smoother application and help reduce brushstrokes.
- Some model/enamel paints need to be thinned as well. In most cases, you will need to use a paint thinner formulated for enamel paints; it's typically sold alongside the other enamel paints.
4
Apply a light, even coat of paint. Don't worry if the first coat of paint doesn't cover the entire surface; you will be applying several coats of paint. This is important, whether you are spraying or brushing the paint on.
- Hold spray cans 12 to 18 inches (30 to 46 centimeters) away from the surface. Apply the paint in a sweeping motion.
- Apply acrylic paints using a taklon, kanekalon, or sable brush.
- Apply enamel/model paints using a stiff-bristle brush. They are typically sold alongside the other model paints.
Allow each coat of paint to dry before applying the next one. Alternate the directions you paint in for each layer: side-to-side for the first layer, top-to-bottom for the second layer, etc. How many layers you apply depends on the coverage you need. In most cases, you'll only need 2 to 3 coats.
How long it takes for the paint to dry depends on the type of paint you are using. For most types of paint, this should only take 15 to 20 minutes. Let final coats dry for 24 hours.
6
Let the paint to dry completely after your final coat. At this point, your project is complete and ready to use. If you'd like to add some details or a top coat, read on to the next part.
- If you applied masking tape earlier, you should remove it now. Peel it away carefully so that you don't accidentally chip the paint.

Part 3

Part 3 of 3:

Touching Up and Sealing the Surface

Download Article

Carefully inspect your piece. If there are any bare patches or chips, fill them in with more paint and a thin brush. If you used spray paint earlier, you might want to use acrylic paint in a matching color and finish for this step.^{[5]XResearch source}
2
Add some details, stencils, or weather, if desired. This step is completely optional, but it can bring more life and character to your piece, especially if it is a prop or figurine. Here are some ideas to get you started:
- Apply stencils to the piece, then paint over them with spray paint or acrylic paint and a foam brush.
- Use a thin, pointed brush to paint on delicate scrollwork or designs.
- Add highlights with lighter shades of your paint color, and shadows with darker shades.
3
Apply a light coat of polyurethane sealer for extra-durability, if desired. You can use the spray-on or the brush-on kind, but the spray-on kind will give you a smoother finish, however. Apply a single, light coat, then let it dry for at least 30 minutes. Apply one to two more coats, if needed, allowing 30 minutes between each one.^{[6]XResearch source}
- Choose a sealer in a finish that appeals to you: matte, satin, or glossy.
- Several light coats of sealer are better than one thick coat. If you apply the sealer too thickly, it may turn out tacky.
4
Allow the paint and sealer to dry completely. Just because something feels dry to the touch does not mean that it is dry throughout. Check the label of your paint and sealer bottle, and see if there are any drying or curing times.^{[7]XResearch source}
- Many enamel-based paints require several days to cure. During this time, they may be sticky and prone to peeling or chipping.

Expert Q&A

Search

Add New Question

Question
Can plastic receptacle covers be painted?
Mark Spelman
Construction Professional
Mark Spelman is a General Contractor based in Austin, Texas. With over 30 years of construction experience, Mark specializes in constructing interiors, project management, and project estimation. He has been a construction professional since 1987.
Mark Spelman
Construction Professional
Expert Answer
Yes, they can. But be sure to use a good bonding primer and spray paint.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 8 Helpful 22
Question
What paint can I use on a composite door?
Mark Spelman
Construction Professional
Mark Spelman is a General Contractor based in Austin, Texas. With over 30 years of construction experience, Mark specializes in constructing interiors, project management, and project estimation. He has been a construction professional since 1987.
Mark Spelman
Construction Professional
Expert Answer
I would use an oil-based primer with a water-based latex paint.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 33 Helpful 25

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Read Video Transcript

Tips

Some types of paint will be more durable than others. For best results, look for paints that are specifically labeled for use on plastic.
Thanks
Helpful9 Not Helpful0
If the spray paint is starting to drop or pool, you are applying it too thickly. Move the can further away from the item and spray it in a fanning motion.
Thanks
Helpful9 Not Helpful1
If you are painting a multi-sided object, such as a box, work one side at a time.
Thanks
Helpful5 Not Helpful2

Show More Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!

Warnings

Some types of plastic will repel paint, regardless of your preparation. There is little you can do in this case.
Thanks
Helpful20 Not Helpful1
Items that will see constant use may stat to chip over time.
Thanks
Helpful8 Not Helpful0
Always work in a well-ventilated area to avoid inhaling toxic fumes from the paint, sealer, or mineral spirits.
Thanks
Helpful11 Not Helpful1