How to Make Copper Acetate

If you have ever seen a bluish color on a penny, it is likely copper acetate. These fine blue copper acetate crystals form when copper reacts with acetic acid. You can create copper acetate in a lab setting or at home. You don't need a lot of scientific background or access to expensive lab equipment to create this chemical.

Method 1

Method 1 of 3:

Making a Copper Acetate Solution from Household Chemicals

Download Article

1
Mix acetic acid and hydrogen peroxide. The household version of acetic acid is vinegar. It is a dilute form of acetic acid that shows up in many home chemistry experiments. Mix it with hydrogen peroxide, which is usually kept in homes to clean cuts and scrapes (in the brown plastic bottle). Use a 50/50 mixture.^{[1]XResearch source}
- For example, if you use 1 cup (237 ml) of vinegar, use 1 cup (237 ml) of hydrogen peroxide.
- It is best to use plain white vinegar.
- Wear gloves and goggles when dealing with acids and oxidizers. You don't want them on your skin or in your eyes.
Though the solution does not have to be boiling for the reaction to occur, bringing it to a boil takes out the guesswork. Put the solution on the stove in a stovetop-safe glass container and let it come to a slight boil. Once at a boil, it is ready to react with copper to form copper acetate.^{[2]XResearch source}
Advertisement
3
Add copper to the solution. Use copper wire or a penny to supply copper for the reaction. Lower the copper into the solution, being careful not to splash yourself or touch the hot solution. You should be wearing gloves and goggles in case the solution does splash.^{[3]XResearch source}
- If you are using a penny, know that you should only use pennies minted in or before 1982. After that, pennies have been made from copper plated zinc and only contain about 2.5% copper (down from 88-95% copper up to 1982).^{[4]XResearch source}
4
Monitor the reaction. Watch for the solution to change color. A blue color indicates that copper acetate has formed. This should happen in a matter of minutes.
- If the solution does not turn blue, copper acetate did not form. In this case, check your reagents. Make sure the vinegar and peroxide are in correct proportions and that the chemicals are not expired. Also, verify that your copper source is truly copper and not just another metal plated with copper.

Method 2

Method 2 of 3:

Reacting Common Chemicals to Form Copper Acetate Solution

Download Article

1
Make calcium acetate. Add calcium carbonate to vinegar. Mix until the calcium carbonate is completely dissolved. You can order calcium carbonate from a chemical supplier, but this is not necessary as it is the main ingredient in chalk.
- Use plain white vinegar.
- You can simply grind up chalk to make calcium carbonate powder.
- Goggles and gloves should be worn while working with acids.
- Use half as much calcium carbonate by volume as vinegar. For example, if you use 2 cups (473 ml) of vinegar, use 1 cup (237 ml) of calcium carbonate.
2
Add the calcium acetate to a copper sulfate solution. Copper sulfate is another easy chemical to find at a home and garden store. It is often branded as a fungicide. It may also be labeled as a stump killer. It is found dissolved in water.
- Pour the calcium acetate solution in slowly until the color turns blue. The blue color indicates that you have made copper acetate.
- The resulting solution should be blue in color.
- Avoid getting the solution on your skin or in your eyes by wearing gloves and goggles.
3
Filter the solution. The blue solution contains dissolved copper acetate. There will also be a solid that precipitates out of the solution (calcium sulfate). Pour the solution through a strainer to remove the calcium sulfate. You will be left with a blue copper acetate solution.
- Calcium sulfate is irritating to the skin and eyes, so wear goggles and gloves while handling it. If you get any on your skin, wash immediately with soap and water. If you get it in your eyes, flush them with warm water for at least 15 minutes.
- You can safely dispose of small amounts of calcium sulfate (under 5 lbs or 2.3 kg) in a regular trash container, as long as the container is in good shape and has a tightly sealed lid.
- Consider saving your calcium sulfate to use in other experiments, such as heating with charcoal to produce calcium sulfide.^{[5]XResearch source}

Method 3

Method 3 of 3:

Growing Copper Acetate Crystals

Download Article

1
Dissolve copper acetate monohydrate in water. These pellets can be found at a chemical supply store or ordered online. Drop them into warm water. Stir the water with a glass stirring rod until the crystals are completely dissolved. The solution should be blue in color.^{[6]XResearch source}
- If you have made your own copper acetate solution from household chemicals, this step is not necessary.
2
Facilitate the precipitation. Copper acetate will precipitate spontaneously. Leave the solution in a cool, dry place. As the water evaporates, copper acetate will be forced out of solution. You will see blue crystals form across the surface of your dish.^{[7]XResearch source}
- You can also drop a crystal in the solution to jump-start the precipitation.
- Put the solution out of reach of small children and pets. If left unattended, pets and small children may ingest the solution. This can lead to acute copper poisoning that can be dangerous or even fatal.^{[8]XResearch source}
Once you have obtained crystals, pour off any remaining solution. Transfer the crystals to a paper towel. Let them sit for a day or 2 to dry out.^{[9]XResearch source}

Community Q&A

Search

Add New Question

Question
I tried the first method but it turned into green. What is it instead of copper acetate?
Community Answer
You most likely had too much carbon dioxide present when you were performing the reaction. This would result in the creation of copper carbonate, which is green. It's the same reason the Statue of Liberty is green.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 2 Helpful 7
Question
Can I use spicy vinegar instead of plain white vinegar?
Community Answer
It is best to use plain vinegar instead of spicy, as spicy vinegar may contain impurities.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 3 Helpful 6

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

If you have a solid layer floating in your solution after dissolving copper acetate monohydrate, add a little vinegar to dissolve it.
Thanks
Helpful0 Not Helpful0

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!

Warnings

Always wear gloves when working with chemicals.
Thanks
Helpful3 Not Helpful0
Keep the solution away from small children or pets. Do not consume the solution.
Thanks
Helpful3 Not Helpful0
Always wear goggles when working with chemicals.
Thanks
Helpful3 Not Helpful0