How to Do Antilog

LOG (also known as a “compression operator”) is a mathematical tool that compresses numbers. It is typically used when numbers are too large or too small to handle easily, as often happens in astronomy or integrated circuits. Once compressed, a number can be converted back to its original form using an inverse operator known as “antilog.”

Method 1

Method 1 of 2:

Using an Antilog Table

Download Article

1
Separate the characteristic and the mantissa. Consider the number under observation. The characteristic is the part that comes before the decimal point; the mantissa is the part that comes after the decimal point. Antilog tables are arranged with respect to these parameters, so you need to separate them.^{[1]XResearch source}
- As an example, say you need to find the antilog for 2.6452. The characteristic is 2, and the mantissa is 6452.
2
Use the antilog table to find a corresponding value for your mantissa. Antilog tables are easily available; you may have one in the back of your mathematics textbook. Open the table and look for the row number consisting of the first two digits of the mantissa. Then find the column number equal to the third digit of the mantissa.^{[2]XResearch source}
- In the example above, you would open the antilog table and find the row number beginning with .64, then the column for 5. In this case, you would find that the corresponding value is 4416.
Advertisement
3
Find the value from the mean difference columns. The antilog table also includes a set of columns known as “mean difference columns.” Look at the same row as before (the row corresponding to the first two digits of your mantissa), but this time, find the column number equal to the fourth digit of the mantissa.^{[3]XResearch source}
- In the example above, you would again use the row number beginning with .64, but find the column for 2. In this case, your value is 2.
4
Add the values obtained in the previous steps. Once you have these values, the next step is to add them together.^{[4]XResearch source}
- In the example above, you would add 4416 and 2 to get 4418.
5
Insert the decimal point. The decimal point always goes in a specific designated place: after the number of digits that corresponds to the characteristic plus 1.^{[5]XResearch source}
- In the example above, the characteristic is 2. You would therefore add 2 and 1 to get 3, then insert the decimal point after 3 digits. The antilog of 2.6452 is therefore 441.8.

Method 2

Method 2 of 2:

Calculating the Antilog

Download Article

1
Consider your number and its parts. For whatever number you are observing, the characteristic is the part that comes before the decimal point; the mantissa is the part that comes after the decimal point.^{[6]XResearch source}
- As an example, say you need to find the antilog for 2.6452. The characteristic is 2, and the mantissa is 6452.
The mathematical log operator has a parameter known as the base. For numerical computations, the base is always 10. Know, therefore, that when you use this method for calculating an antilog, you will always use a base of 10.^{[7]XResearch source}
3
Calculate the 10^x. By definition, the antilog of any given number x is the base^x. Recall that the base for your antilog is always 10; x is the number with which you are working. If the mantissa of the number is 0 (in other words, if the number under observation is a whole number, with no decimal point), the computation is easy: simply multiply 10 times 10 that number of times. If the number is not an even whole, use a computer or calculate to compute 10^x.^{[8]XResearch source}
- In the example above, we do not have a whole number. The antilog is 10^2.6452, which, using a calculator, comes to 441.7.

Community Q&A

Search

Add New Question

Question
Can I do an antilog of a negative number?
Community Answer
The antilog of a number is the same as raising 10 to the power of the number. So, antilog -x =1/(10 to the power x). Therefore, you can do an antilog of a negative number.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 97 Helpful 176
Question
How can I find the antilog of 3.76?
Harris
Community Answer
Log x = 3.76, where x = antilog 3.76. A characteristic of log x = 3, a mantissa of log x = .76. In the table of antilog, look for .76 in extreme left column and 0 in top row. Now look at the number at intersection of row containing .76 and column containing 0. The number is 5754. Note that the place between first nonzero digit and its next digit is called 'reference position' e.g 3^76 -- ref-position is between 3 and 7. Here reference position is between 5 and 7. The characteristic is 3, so the decimal point in 5754 will be after three digits right to the ref-position. x = 5754.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 94 Helpful 167
Question
Why do you use a dot in 0.0013?
Pineapple.com
Community Answer
The dot shows it is a decimal which defines its place (0.1= a tenth while 0.001= a hundredth).
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 61 Helpful 109

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

The characteristic and mantissa are simply the names of the parts of a number that come before and after the decimal point, respectively. They have no special significance.
Thanks
Helpful76 Not Helpful29
Mathematical operations like multiplication and division are simple to handle using logs. This is because in log, multiplication is changed to addition, and division is changed to subtraction.
Thanks
Helpful67 Not Helpful28
Log and antilog are extensively used in scientific computations.
Thanks
Helpful67 Not Helpful34