How to Cook a Bone in Ham

Roasting a bone-in ham will impress guests on your next special occasion. You can make a homemade sweet or spicy glaze. Cook a bone-in ham slowly, basting or glazing regularly for rich moisture and flavor.

Part 1

Part 1 of 4:

Choosing a Bone-in Ham

Download Article

Generally bone-in roasts weigh 10 lbs. (4.5 kg) or more. They can feed a large family on a special occasion.
2
Pick an uncooked ham, if you want to cook it yourself. Most spiral hams or honey-baked hams are pre-cooked, meaning you simply have to warm it up in the oven for 10 minutes per lb. (0.45 kg).
- You may be able to pick between a half-ham roast and a full-ham roast. Cooking times will vary, but preparation is very similar.
- Cook a 1/2 lb. (0.22 kg) of ham for each person you plan to serve. Increase the amount to ensure leftovers.
Advertisement
Most hams in supermarkets are boneless. You may need to inquire with a local butcher or pig seller in the area, if you can’t find an uncooked, bone-in ham at the supermarket.
You can remove the skin yourself at home.
If your ham is fresh, it should have a cook-by date that is within a week. A frozen ham may be prepared within a few months.

Part 2

Part 2 of 4:

Prepping a Bone-in Ham

Download Article

It will take between 2 and 4 days to defrost completely before you can cook it.
Unwrap it completely. Discard any juices.
3
Excise the skin with a sharp chef’s knife or boning knife. You can cut horizontally, parallel to the meat. Leave some fat on the ham’s surface for flavor.
- Having the right knife is essential to safe and accurate cutting. A chef's knife, with its long blade measuring between 6-14 inches, is ideal. Make sure your knife is freshly cleaned and sharpened.
- It can be handy to also have a boning knife. This knife will enable you to get to the pieces of meat closer to bones and joints that can't otherwise be easily detached using your fingers.
Some hams come with a glaze that you can mix with water.
5
Cut a crisscross design into the surface of the ham. Your diamonds should be 1/4 inch (0.6 cm) deep, cutting through the fat and slightly into the top of the flesh. Scoring will let the glaze seep in and render the fat from the top.
- You can use a clean piece of cardboard to guide the knife along the top like a ruler. ^{[1]XResearch source}
If you like a traditional flavor and look, stud each of the diamonds with cloves. ^{[2]XResearch source}

Part 3

Part 3 of 4:

Roasting a Bone-in Ham

Download Article

2
Prepare your ham for cooking early on in the day, when you want to serve it. A 20 lb. (9 kg) ham can take 7 hours to cook, while a 10 lb. (4.5 kg) ham takes between 3 and 4 hours. ^{[3]XTrustworthy SourceFoodSafety.govOnline portal combining food safety information from the U.S. Food and Drug Administration, the Food Safety and Inspection Service, and the Centers for Disease Control and PreventionGo to source}
- Cook 10 to 14 lb. (4.5 to 6.4 kg) hams for 22 to 25 minutes per lb. (0.45 kg).
- Cook a larger ham for 18 to 22 minutes per lb.
- Always check the core temperature with a meat thermometer.
Choose a shallow rack with a sturdy pan to catch drippings.
Test the ham halfway through the cooking time. When a meat thermometer reaches 130 degrees Fahrenheit (54 degrees Celsius) in the center, you can start to baste or glaze the roast ham.
5
Remove the ham from the oven for a few minutes. Brush your glaze mix onto the surface of the ham. If you are basting the ham with its own juices, use a baster.
- Cover the surface of the ham with pineapple slices for extra flavor.
Baste or glaze the ham every half an hour. Cover it with aluminum foil if the surface appears too brown or dry.
Place it on a carving board to rest for 15 minutes and cover it with aluminum foil. ^{[4]XResearch source}

Part 4

Part 4 of 4:

Carving a Bone-in Ham

Download Article

Ensure the knife is cleaned and sharpened before use. Cut inward until it reaches the bone.
Remove the knife.
Cut a 1-inch (2.5 cm) slice of ham from skin surface to the bone. Repeat until the top section of the roast fans out into slices.
Then, cut away the sides of the ham along the fat lines on each side.
5
Flip the ham over. Carve the slices from top to bone, just as you did on the first side.
- Reserve the bone for soup.

Community Q&A

Search

Add New Question

Question
Should I add water or other liquid to the roasting pan with the ham?
Michele
Top Answerer
This is a recipe for a dry roasting a bone-in ham and there is no need to add any sort of liquid. However, if you want to braise the ham, that's different. Braising is the process by which meats are cooked in a savory liquid that provides a moist cooking environment.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 4 Helpful 5
Question
Should I add water or another liquid to the roasting pan with the ham?
Community Answer
It really depends on what you're cooking it with. If you're baking it in an oven, or you're slow cooking it, a simple broth will work just fine.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 2 Helpful 4
Question
How long do I bake a 12 lb. bone in ham?
Adele Orr
Top Answerer
A 12 lb. bone-in ham will take approximately 4.5 to 5 hours to cook. Cook until the internal temperature of the ham reaches 130 degrees Fahrenheit (54 degrees Celsius).
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 0 Helpful 0