Download ArticleDownload ArticleX
This article was reviewed by Anne Schmidt. Anne Schmidt is a Chemistry Instructor in Wisconsin. Anne has been teaching high school chemistry for over 20 years and is passionate about providing accessible and educational chemistry content. She has over 9,000 subscribers to her educational chemistry YouTube channel. She has presented at the American Association of Chemistry Teachers (AATC) and was an Adjunct General Chemistry Instructor at Northeast Wisconsin Technical College. Anne was published in the Journal of Chemical Education as a Co-Author, has an article in ChemEdX, and has presented twice and was published with the AACT. Anne has a BS in Chemistry from the University of Wisconsin, Oshkosh, and an MA in Secondary Education and Teaching from Viterbo University.
There are 9 references cited in this article, which can be found at the bottom of the page.
This article has been fact-checked, ensuring the accuracy of any cited facts and confirming the authority of its sources.
This article has been viewed 190,766 times.
A time and motion study is used to analyze work efficiency through the observation and timing of tasks. It can help you see where your day could be more efficient, saving you time and energy, which everyone could use! You can perform one on yourself or observe another person. First, you must decide what method you'll use from real-time observation to a sampling approach, and then you'll observe and time the task. After you've completed the study, you can use the data to create a more efficient work process.
Steps
Use work sampling if you have limited time to record. In this approach, you observe the person at certain times rather than continuously. The intervals can be regular or random. You observe the person for a given time, and then extrapolate from the samples how much time is spent on each task. This type works better on tasks that have fewer components or workers that do fewer tasks overall.[1]- For instance, if a person's main job is invoicing, random sampling can work because each time you check in, you get a snapshot of what the person is doing. Once you have all the data, you can figure out which task or component the person spends the most time on by looking at how often and how long it showed up in each random sample.
- The benefit with this method is you can observe more than one person in a set time period by rotating through each person.
- If you're using this method on yourself, set up an alarm to go off at certain intervals so you can record what you're doing for a set amount of time.
Observe the task in real time to be able to ask questions. In this approach, you are in the room with the person as they do the task. Observe what they do, breaking the task into smaller components as you record times. Each component should make sense as a whole without getting so detailed that you can't keep up.[2]- Timing a large task isn't helpful without looking at the components of each task. If you analyze the components, you can look for inefficiencies. You won't stop the person; you're just breaking down the task for recording purposes. For instance, if the task is checking the mail, the components would include walking to the mail area, finding the mail, taking it back to the desk, opening envelopes, reading the mail, and discarding or dealing with each letter.
- It can help to have a group for observation. That way, you can have one person to work the stopwatch, 1 person to record times, and 1 person to make notes.
- You can also use this approach on yourself. In that case, you'll be writing down each component as you do it.
Advertisement
Record a video to make the participant perform more naturally. Instead of observing the tasks in real time, take a video. That way, you can go back later and analyze how long each task takes. You won't miss as much because you can always rewind the video to see something again.[3]
Record a video of yourself to perform a more accurate study. If you're doing the study on yourself, this approach will be much easier than the other 2. Set up a camera on a tripod in a place that can capture what you're doing. Let it record while you go through a set task, such as writing a report.[4]- Test the task over a given period. For example, you may want to test it over a week or even a month.
Advertisement
Set up a spreadsheet to record data on. You'll need a place to write what the task is, and a spreadsheet is ideal. Next to it, you'll need a place for the time. Often, tasks are done in batches. If that's the case, have a place to record the time for each component of each task. You'll just need a set of numbered boxes for this part. Also add a column for notes.- For instance, if the task is checking email and one of the components is reading email, make a record of the time it takes to read each email in the numbered boxes next to the component.
Divide work into small categories. Part of performing a time and motion study is figuring out exactly how much time is spent on each task. Generally, the only way to improve efficiency is to look at the small actions within each task. As the work is being done, establish each component of the task and write a short description down.[5]- The key is finding the right level of detail. You don't want to be overly detailed, as timing how long it takes to hit a single button isn't useful. However, you also don't want to be too broad, as that won't give you enough data to work on efficiency.
- Say you're checking email. You might break it down into logging on to the computer and into your email, deleting spam mail without opening, reading emails, composing replies, and organizing email into folders.
Time each task. Start with a stopwatch. Time each component of the task, jotting down the time it took to complete each component. It's often easier to just stop and start the timer, using the elapsed time. You can go in later and figure out how many seconds were spent on each task.[6]- For more accuracy, take data over multiple days.
Time tasks using video. When you're using a video, you'll need to stop and start the video for each component you're timing. That way, you'll have time to write down your notes and the times for each component.
Advertisement
Average out the times for each component. After you're done, take the times for each component and find the average. To find an average, add all the times for 1 component together, and then divide by the number of times in that group.- For instance, if you have reading emails as the component, the times might be 65 seconds, 210 seconds, 240 seconds, 39 seconds, and 354 seconds. Add the numbers together: 65 + 210 + 240 + 39 + 354 to equal 908. Divide by the number of times. In this case, that's 5, so divide 908 by 5 to get 181.6 seconds on average per email.
Find the average time for the task. The easiest way to find the average time for the whole task is to simply add all the averages for the components together. That will give you the average for the whole task.
Assign a high or low value to your tasks. Assigning a high or low value to each task can help your prioritize what's important. You don't have to assign a number; just label them as high value or low value. For instance, answering emails at your job may be important, but unless you're in customer service, it likely has a lower value overall than finishing an important report.[7]- Cut back on low-value, high-time tasks. After you've rated your tasks, look at which tasks take a large amount of time while having a low value overall. Those are the tasks that you need to figure out how to cut back. It's also important to look at the tasks that take a lot of time but also have high value. It doesn't hurt to try to make these tasks more efficient.[8]
Watch for multitasking. Multitasking tends to make each individual task take longer because you can't give either your full attention. In cases where you're multitasking, such as going back and forth between email and writing a report, try changing up. Set a time period where you are only doing one thing. If you're writing a report, ignore your email.[9]- If you read email constantly throughout the day, you're constantly pulling your train of thought from whatever else you're doing. Often, it's better to do all of a task at once, such as only reading emails in the morning, at midday, and right before you leave work.
Look for inefficiencies to cut back on them. Often, you'll find inefficiencies in the routines you time and describe. Eliminating inefficiencies can help you work better and get more done in the time you have.- For instance, if you must file paperwork daily in another room away from your office, consider saving it to do all at once. If you are constantly going back and forth, that takes away time you could be spending on other tasks.
Advertisement
Expert Q&A
Search
- QuestionHow do you deal with not feeling productive?
Erin Conlon, PCC, JDErin Conlon is an Executive Life Coach, the Founder of Erin Conlon Coaching, and the host of the podcast "This is Not Advice." She specializes in aiding leaders and executives to thrive in their career and personal lives. In addition to her private coaching practice, she teaches and trains coaches and develops and revises training materials to be more diverse, equitable, and inclusive. She holds a BA in Communications and History and a JD from The University of Michigan. Erin is a Professional Certified Coach with The International Coaching Federation.
Executive Life CoachTry to figure out where these feelings are stemming from. Are you taking care of yourself? How is your well-being? A lot of times, a lack of productivity is connected with how you're taking care of yourself. - QuestionWhat causes a lack of motivation at work?Erin Conlon, PCC, JDErin Conlon is an Executive Life Coach, the Founder of Erin Conlon Coaching, and the host of the podcast "This is Not Advice." She specializes in aiding leaders and executives to thrive in their career and personal lives. In addition to her private coaching practice, she teaches and trains coaches and develops and revises training materials to be more diverse, equitable, and inclusive. She holds a BA in Communications and History and a JD from The University of Michigan. Erin is a Professional Certified Coach with The International Coaching Federation.
Executive Life CoachNot enjoying your job can definitely lead to a lack of motivation. If you don't like what you're doing, it's hard to be productive in it. Ask yourself why you're doing what you're doing—is there a really good purpose behind it, or do you feel like you're only doing it for a paycheck?
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
SubmitAdvertisement
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
References
- ↑ https://www.sciencedirect.com/science/article/pii/S1532046414000562
- ↑ https://www.sciencedirect.com/science/article/pii/S1532046414000562
- ↑ https://www.sciencedirect.com/science/article/pii/S1532046414000562
- ↑ https://www.sciencedirect.com/science/article/pii/S1532046414000562
- ↑ https://www.officialgazette.gov.ph/downloads/2019/07jul/20190717-RA-IRR-11032-RRD.pdf
- ↑ http://courses.washington.edu/ie337/Motion%20and%20Time%20Study.pdf
- ↑ https://uknowledge.uky.edu/cgi/viewcontent.cgi?article=1156&context=gradschool_theses
- ↑ https://www.officialgazette.gov.ph/downloads/2019/07jul/20190717-RA-IRR-11032-RRD.pdf
- ↑ https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5333222/
About This Article
Chemistry Instructor
This article was reviewed by Anne Schmidt. Anne Schmidt is a Chemistry Instructor in Wisconsin. Anne has been teaching high school chemistry for over 20 years and is passionate about providing accessible and educational chemistry content. She has over 9,000 subscribers to her educational chemistry YouTube channel. She has presented at the American Association of Chemistry Teachers (AATC) and was an Adjunct General Chemistry Instructor at Northeast Wisconsin Technical College. Anne was published in the Journal of Chemical Education as a Co-Author, has an article in ChemEdX, and has presented twice and was published with the AACT. Anne has a BS in Chemistry from the University of Wisconsin, Oshkosh, and an MA in Secondary Education and Teaching from Viterbo University. This article has been viewed 190,766 times.
Co-authors: 8
Updated: March 16, 2024
Views: 190,766
Categories: Health
Article SummaryX
A time and motion study observes the timing of tasks to analyze how efficiently they are performed. You can perform a time and motion study yourself or observe another person. When conducting the study, you can either do it in real-time or record the task so you can watch it several times to see where efficiency might break down. After you observe the task, set up a spreadsheet to write down the tasks observed. If possible, break them down into smaller actions. For example, if you’re focusing on checking email, look at logging into the computer, deleting spam, reading emails, and so on. Time each action and find the average time for each task. Finally, cut back on tasks that take a lot of time but are of low overall value. To learn how to look for inefficient uses of time, keep reading!
Did this summary help you?
Thanks to all authors for creating a page that has been read 190,766 times.
Reader Success Stories
"We are just on the verge of doing a time & motion study for our boiler dept.( Firemen) and your article has given us more than what we perceived."..." more
Did this article help you?
⚠️ Disclaimer:
Content from Wiki How English language website. Text is available under the Creative Commons Attribution-Share Alike License; additional terms may apply.
Wiki How does not encourage the violation of any laws, and cannot be responsible for any violations of such laws, should you link to this domain, or use, reproduce, or republish the information contained herein.
- - A few of these subjects are frequently censored by educational, governmental, corporate, parental and other filtering schemes.
- - Some articles may contain names, images, artworks or descriptions of events that some cultures restrict access to
- - Please note: Wiki How does not give you opinion about the law, or advice about medical. If you need specific advice (for example, medical, legal, financial or risk management), please seek a professional who is licensed or knowledgeable in that area.
- - Readers should not judge the importance of topics based on their coverage on Wiki How, nor think a topic is important just because it is the subject of a Wiki article.
Advertisement
