How to Care for a Sansevieria or Snake Plant

Sansevieria, also known as snake plant and mother-in-law’s tongue, is a hardy plant with long, broad leaves. Because of their adaptability and tolerance, they’re often used as houseplants. Their broad leaves soak up toxins and carbon dioxide and produce oxygen to help purify the air in the room. Though they are tough, they do need some care in order to stay healthy. If you choose a healthy plant, set up the right environment, and maintain it properly, your sansevieria will have a long and healthy life.

Method 1

Method 1 of 3:

Re-Potting Your Plant

Download Article

1
Look for dark green leaves to make sure your sansevieria is healthy. Dark leaves on a snake plant indicate that it is healthy and well-nourished. Leaves that have a yellowish tinge on the outer edge of the leaves or leaves that are pale and floppy could indicate that the plant is dying. Don’t re-pot your plant until it’s healthy so it can adjust to its new home and survive the transfer.^{[1]XResearch source}
- A pale sansevieria doesn’t necessarily mean that the plant will die. It may just need some water and care and you can bring it back to life!
2
Get a pot made out of a porous material. Sansevieria are very susceptible to rotting out, especially if they sit in water for too long.^{[2]XExpert SourceMelinda Meservy
Plant SpecialistExpert Interview. 18 August 2020.} Choose a pot that has good drainage, like a terra cotta pot or a pot made with another porous material so your snake plant isn’t at risk of rotting.^{[3]XResearch source}
- Porous materials include terra cotta, clay, timber, paper pulp, and other natural materials that allow moisture to move through them.
- If you want to use a decorative pot that doesn't have drainage holes, place your plant inside a plastic grow pot, then set the grow pot inside of the decorative pot.^{[4]XExpert SourceMelinda Meservy
  Plant SpecialistExpert Interview. 18 August 2020.}
Tip: If you plan to keep your snake plant outside, choose a darker color pot to attract more heat, especially if you live in an area that freezes.
Advertisement
3
Choose a potting mix that allows for good drainage. Snake plants don’t require too much water, and their roots can actually be damaged if they’re allowed to soak in soil that is full of moisture. To allow for good drainage and a healthy root system, choose a free-draining soil mix or even a soilless potting mixture. Place your sansevieria into the potting mixture and cover it with enough to hold it secure in the pot.^{[5]XResearch source}
- Many potting mixes that you can purchase from gardening stores are designed to help control moisture and improve drainage. Check the packaging for information on the potting mix.
- Use a soilless potting medium like vermiculite, peat moss, or perlite.
4
Grasp the sansevieria at the base of the leaves and pull it from the pot it came in. When you’re ready to re-pot your snake plant, take a firm hold of the base of the leaves, where they connect to the soil. Gently slide the plant out of its pot.^{[6]XResearch source}
- Don’t shake any dirt loose from the roots.
- Be careful not to yank or jerk the plant or you could separate the leaves from the roots and kill the plant.
5
Place the snake plant into its new pot and add soil to cover the roots. Move the plant to its new pot and add enough soil or soilless mixture to support the plant and keep it upright. Add more soil mixture if the sansevieria leans to one side or is unstable in the pot.^{[7]XResearch source}
- Hold the snake plant in an upright position while you add soil to the pot.
- Pack the soil down by patting it with your hand to add support to the plant.

Method 2

Method 2 of 3:

Creating the Right Environment

Download Article

1
Place the sansevieria in indirect sunlight. Snake plants are hardy, tough plants that can survive in full sunlight, as well as very low light. But they really thrive in indirect sunlight, which is why they are such great houseplants.^{[8]XResearch source}
- Indirect sunlight can be near an eastern facing window or in the center or corner of a room that isn’t directly exposed to sunlight coming in through a window.
- Snake plants prefer natural light, so avoid putting them in a room without any windows.
2
Keep the temperature between 55–85 °F (13–29 °C). Sansevieria prefer warmer temperatures, but anything above 85 °F (29 °C) is dangerous for the plant and will cause it to start to wilt. Snake plants are also susceptible to cold temperatures. Anything below 50 °F (10 °C) can kill the roots of the plant.^{[9]XResearch source}
- Temperature fluctuations do not generally affect snake plants as long as the temperature stays within their preferred range.
Tip: Frost is especially harmful to sansevieria. If you plan to keep your snake plant outside, be sure to bring it in before a hard freeze!
3
Do not place your sansevieria somewhere pets or babies can reach it. Snake plants have a low level of toxicity, but they can cause pain, nausea, vomiting, and diarrhea if they’re ingested. Pets and small babies are at particular risk of accidentally eating some of the leaves. Be sure to place your snake plant somewhere out of reach to them.^{[10]XTrustworthy SourceAmerican Society for the Prevention of Cruelty to AnimalsLeading organization dedicated to the prevention of animal crueltyGo to source}
- A floating shelf or stool can elevate your plant and keep it out of reach.

Method 3

Method 3 of 3:

Maintaining Your Sansevieria

Download Article

1
Water your sansevieria when the top 1 inch (2.5 cm) of soil is dry. Snake plants do not need lots of water, which is one of the reasons why they’re so easy to care for. In fact, you may be more likely to overwater the plant and put the roots at risk of rotting.^{[11]XExpert SourceMelinda Meservy
Plant SpecialistExpert Interview. 18 August 2020.} To be safe, only water your snake plant when the top layer of the soil is completely dry. Check the soil by sticking your finger into it to see if there is moisture.^{[12]XResearch source}
- Add enough water to saturate the soil, but not so much that there’s standing water in the pot. The excess water should drain out of the pot.
Tip: If you’re using a soilless potting mixture, water your sansevieria once a week.
2
Add fertilizer every few weeks in the spring and summer. Snake plants don’t need much fertilizer, but they will grow more if you fertilize them during their growing season in the spring and summer. Use a basic fertilizer for houseplants and only add it every few weeks or every other watering.^{[13]XResearch source}
- Check the packaging on the fertilizer that you choose to follow the correct dosage and method.
- Never give your plants fertilizer while they're dormant, which is usually during the winter months.^{[14]XExpert SourceMelinda Meservy
  Plant SpecialistExpert Interview. 18 August 2020.}
3
Turn the pot weekly so the leaves get even light exposure. To ensure that your snake plant grows evenly and all of the leaves are receiving adequate exposure to sunlight, rotate the pot about a quarter turn. This will also keep your plant growing vertically, rather than leaning in one direction.^{[15]XResearch source}
- An easy way to remember is to turn the pot whenever you water your sansevieria.
4
Avoid trimming sansevieria. Unlike other houseplants, pruning snake plants does not stimulate growth. They are such slow growers that injuring them by trimming or pruning will actually cause them to slow their growth as they heal.^{[16]XResearch source}
- If you want to keep your snake plant a specific height and size, trim it sparingly to keep it healthy. Repeated pruning and trimming will damage them and could kill them.
5
Keep an eye out for pests on the sansevieria. Mealybugs and spider mites are the main pests that like to feed and make their homes on snake plants. Whenever you water your plant, inspect the leaves for any insects.^{[17]XResearch source}
- You can get rid of mealybugs by dropping a small drop of alcohol onto them.
- Wash the leaves with warm water and a cloth to remove spider mites.
- Pests may be a sign that your plant is unwell. Restoring the plant's health will usually prevent bugs from preying on it.

Video

Expert Q&A

Search

Add New Question

Question
What does it mean if my snake plant's leaves are brown and wilted?
Melinda Meservy
Plant Specialist
Melinda Meservy is a Plant Specialist and the Owner of Thyme and Places, a botanical boutique offering plants and gifts in Salt Lake City, Utah. Before starting her own business, Melinda worked in process and business improvement and data analytics. Melinda earned a BA in History from the University of Utah, is trained in lean and agile methodologies, and completed her Certified Professional Facilitator certification. Thyme and Places offers indoor plants and containers, a fully stocked potting bench, and tips on plants to suit your space and lifestyle.
Melinda Meservy
Plant Specialist
Expert Answer
Brown, wilted leaves are a good sign you're overwatering. Make sure your snake plant is in a pot that has drainage holes, and only water it when the soil dries out.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 3 Helpful 10
Question
How do I take care of a snake plant?
How.com.vn Staff Editor
Staff Answer
This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
How.com.vn Staff Editor
Staff Answer
The snake plant is a hardy plant and doesn’t need a lot of attention; it’s an ideal plant for people who aren’t around much and who tend to forget plant care! Use quality potting soil to plant it in, keep it in medium light (it’ll tolerate most light but not direct sunlight because this burns them) and water every 2 to 6 weeks (only when the soil is dry). Keep an eye out for pests (mealybugs and aphids), which will usually be rare. It’s an easy-care plant that is generally very forgiving; the article above contains more details to guide you.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 3 Helpful 30
Question
Do all snake plants clean the air?
How.com.vn Staff Editor
Staff Answer
This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
How.com.vn Staff Editor
Staff Answer
A snake plant is one of various plants considered ideal to clean indoor air, perhaps even the "best" indoor plant for removing air impurities because it is such a hardy plant indoors. Various studies, including one from NASA (Wolverton, Johnson and Bounds 1989), showed this plant’s ability to remove toxins such as benzene and formaldehyde from the air of a small room or indoor space. However, later studies (e.g. Kays 2009) are less optimistic about the ability of a plant alone to fix indoor air toxins, due to the many constant ebbs and flows of air from outside. Also, potting soil microorganisms play a part, not just the plant. Beyond a small room, you'd need more than 1 plant to cover the whole house and a standard home might require 10 to 20 plants to achieve real benefits––a bit of a forest!
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 1 Helpful 16