How to Build a Sound Proof Room

Whether you need a fortress of solitude or want to start your own recording studio or music space, you will want to soundproof the space you intend to use. Read below for some helpful advice on how you can soundproof a room on the cheap or do it like the pros.

Things You Should Know

Push bookcases against the wall or install acoustic wall panels. This allows your walls to absorb more sound, making your room quieter.
Avoid annoying buzzing noises by mounting items that could shake, like a stereo. When you do this, make sure to use insulation pads, too.
Fill your walls with damping compound, then cover them with soundproofing panels. This takes more work, but it's very effective.

Method 1

Method 1 of 2:

Easy Methods

Download Article

1
Install sound curtains or thick blankets. You can absorb a little sound by mounting thick blankets to the wall.^{[1]XResearch source} If you're willing to spend a little money, purchase heavy sound curtains instead.
- If you have thick, insulated walls, this will have little additional effect.
You can make walls thicker and more soundproofed by simply making use of bookshelves. Cover a wall in bookshelves and books for a fairly effective sound barrier. Plus, you get a nice library out of the deal.
Advertisement
Have you ever had a neighbor turn their music up really loud and noticed that buzzing, rattling vibration sound more than anything else? Yeah, that’s why you’re going to want to mount items like speakers. Use vibration insulation pads when mounting to keep items like speakers from annoying everyone around you. ^{[2]XResearch source}
Install a door sweep. Nail this rubber loop to the base of a door to block the gap. If the gap is too large to cover with a sweep, nail a strip of lumber to the base of the door first.
5
Use acoustic wedges panels. Purchase 12"x12" panels with a 2" depth curve relief. These do well to absorb low to high frequencies. Some panels come already with an adhesive peel. Use 3M spray adhesive to glue the panels to the walls and ceiling if it doesn't come with adhesive peel. You can cover all or just parts of the surface, depending on the amount of dampening you desire. This cuts down on the 'noise' inside the room and keeps your ears happy, especially if it is music rehearsal space.
- Use a panel that is mostly fiberglass with a thin Mylar perforated facing. These types of panels have the highest ratings in sound absorption values among almost all but the most expensive specialty tiles. They will give you far more bang for buck than any other on the market.

Method 2

Method 2 of 2:

Soundproof Construction

Download Article

1
Use thick material. The thicker and denser the material, the more sound it will absorb. Consider using ⅝" (1.6 cm) drywall instead of the thinner sizes You could also use concrete or brick, if that's an option.^{[3]XExpert SourceAndrew Peters
Architecture & Construction SpecialistExpert Interview. 24 November 2020.}
- If you are improving on an existing wall, build a basic wall frame and attach it to the surface, anchoring it to the existing studs. Cover this with a new layer of drywall or sheetrock—or even multiple layers of drywall, for the best results.^{[4]XExpert SourceAndrew Peters
  Architecture & Construction SpecialistExpert Interview. 24 November 2020.}
2
Separate the two layers of wall. Whenever sound travels into a new substances, some of its energy is absorbed, and some is reflected. Increase this effect by building the wall from two sheets of drywall or sheetrock, with as much space between them as possible. This is called decoupling.
- Decoupling actually makes the wall worse at blocking low frequencies, due to the resonance of the wall. If the gap is only 1 inch (2.5 cm) or less, a damping compound is highly recommended to fight this effect.^{[5]XResearch source}
Try adding mass and dampling glue. "Wanting to muffle an annoying neighbor's rooftop AC unit, the pointers on material density and decoupling principles outlined my next steps. With a plan to add mass and damping glue, I'm hopeful their unit will finally fade into the background!" - Alec S.
Carpet and drywall can help. "With a bedroom, unfortunately, under a frequently used room, I read carefully to learn preventative approaches. Adding carpet and an extra drywall layer helped block footsteps and voices above for some overdue quiet nights." - Mel Schmidt (How.com.vn Community Member)
Your recording studio is ready to be built. "Researching how to soundproof a basic recording area, the instructions moved logically from entry-level acoustic treatment to more robust construction techniques. I grasped this intricate concept well enough to build my own booth!" - Alexander M.
Wall studs and insulation can be game-changers. "Wanting to reduce sound transmission from the room above ours, I appreciated the tailored advice on staggered wall studs and extra insulation. With a plan tailored to our personal nuisance, I finally see an end to the stomping!" - Jerry W.
Diagrams can cement comprehension. "Trying to muffle noise transmission to neighbors, the tips resonated more with the addition of clear diagrams. Now I visualize solutions better, like remembering bookshelves and sound panels absorbing rather than reflecting sound." - Michael J.
Have a story our readers should hear? Share it with 1 billion+ annual How.com.vn users. Tell us your story here.
3
Plan your stud placement. Most walls contain a single row of studs touching both layers of wall. Sound travels easily through these studs, which can cancel out a great deal of work. When building a new wall, choose one of the following stud placements instead:^{[6]XResearch source}
- A double row of studs, one along each interior side. This is the most soundproof method, but requires enough space to leave a gap between the two rows.
- A staggered row of studs, alternating placement along one interior side, then the other.
4
Consider sound clips or channels. These are placed between the studs and the drywall, providing an additional barrier for sound. There are two main options:
- Sound clips are the most effective method, absorbing sound with heavy rubber components. Screw them into the studs, insert a hat channel, then screw the drywall into the channel.^{[7]XResearch source}
- Resilient channel is a springy metal channel designed for soundproofing. Screw this to the studs and drywall using offset screws. This may improve high-frequency blocking at the expense of low frequencies.^{[8]XResearch source}
- Note that hat channels are not effective at sound proofing.
5
Fill walls with a damping compound. This magical substance converts sound energy to heat. This can be used between layers of wall, floor, or ceiling. Unlike most other methods, this should absorb low-frequency noise. This makes it ideal if you expect loud bass from music and home theater systems.
- This is also sold as noise proofing glue or viscoelastic adhesive.
- Some of these compounds may take days or weeks to "cure" to their full potential.^{[9]XResearch source}
6
Insulate with other material. Damping compound is one of the best all-purpose soundproofers, but there are many other insulation materials.
- Fiberglass is cheap and fairly effective.
- Try using spray foam or cotton batt insulation in your wall cavities to help block sound.^{[10]XExpert SourceAndrew Peters
  Architecture & Construction SpecialistExpert Interview. 24 November 2020.}
7
Fill cracks with acoustical caulk. Even small cracks and gaps between materials can undermine sound proofing. Special acoustical caulk (also sold as acoustical sealant) fills these gaps with an elastic, sound-resistant material. Fill all cracks, as well as seams around the walls and windows. Keep the following in mind:
- Water-based caulks are easier to clean up. If using a solvent-based caulk, check the label to make sure it won't harm your materials.
- If the caulk doesn't match the wall color, choose one that specifically says it can be painted over.
- Consider using normal caulk for the smallest cracks, since acoustical caulk is more difficult to handle.
8
Soundproof floors and ceilings. Floors and ceilings can be soundproofed using many of the same systems suitable for walls. Most commonly, homeowners add an additional layer (or two) of drywall, with dampening glue in between.^{[11]XResearch source} As a simple additional step, cover the floor with soundproofing mats, then install carpet.
- You do not need to soundproof the floor if there is no room below you.
- Heavy concrete ceilings won't benefit much from the additional mass of drywall and damping compound. Instead, add a drywall layer with an air gap in between, or fill the gap with fiberglass insulation.
9
Install soundproofing panels. If the soundproofing in your completed room is not substantial enough, you can also use acoustic panels. Cheap options are available, but the more expensive panels may be more effective.
- Be sure to attach these to wall studs or other strong structures.

What Are Creative and Stylish Ways To Soundproof a Room?

Expert Q&A

Search

Add New Question

Question
What is the best material to be used for building a raised walkway?
Mark Spelman
Construction Professional
Mark Spelman is a General Contractor based in Austin, Texas. With over 30 years of construction experience, Mark specializes in constructing interiors, project management, and project estimation. He has been a construction professional since 1987.
Mark Spelman
Construction Professional
Expert Answer
You can use railroad ties to elevate the new walk way. If you want to pour some concrete footers with a beam system, this will remain in place for a long time.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 15 Helpful 32
Question
How do I soundproof my ceiling so that I don't hear my upstairs neighbors?
Mark Spelman
Construction Professional
Mark Spelman is a General Contractor based in Austin, Texas. With over 30 years of construction experience, Mark specializes in constructing interiors, project management, and project estimation. He has been a construction professional since 1987.
Mark Spelman
Construction Professional
Expert Answer
You can add another layer of drywall or some soundproofing material.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 51 Helpful 59
Question
What should I do to make it to where no one can really hear my music and voice?
Mark Spelman
Construction Professional
Mark Spelman is a General Contractor based in Austin, Texas. With over 30 years of construction experience, Mark specializes in constructing interiors, project management, and project estimation. He has been a construction professional since 1987.
Mark Spelman
Construction Professional
Expert Answer
You can fasten soundproof foam material to the wall. You could also build another thinner wall in front of the existing wall.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 47 Helpful 36

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Replace rigid cellulose ceiling tiles. They mostly reflect sound.
Thanks
Helpful0 Not Helpful1
Caulk gaps around any openings for lighting, etc. as well as the perimeter of the drop ceiling.
Thanks
Helpful0 Not Helpful0

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!

Warnings

Construction or heavy modification of walls, floors, and ceilings should be done under experienced supervision only.
Thanks
Helpful6 Not Helpful3
The standard STC soundproof rating system is not always useful. It does not take into account any frequencies below 125 Hertz, which includes sound from music, traffic, airplanes, and construction.
Thanks
Helpful0 Not Helpful0