మూస:Infobox park

Edworthy Park
Edworthy Park
	Bow River seen from Edworthy Park
	Location of Edworthy Park in Calgary
రకం	Urban park
స్థానం	Calgary, Alberta
అక్షాంశరేఖాంశాలు	51°03′41″N 114°09′23″W / 51.06139°N 114.15639°W
విస్తీర్ణం	1.27 కి.మీ2 (0.49 చ. మై.)
నిర్వహిస్తుంది	City of Calgary
తెరుచు సమయం	All year

Tank Hill Park
Tank Hill Park
	Tank Hill from below
	దస్త్రం:San Francisco County
రకం	Natural Area
స్థానం	San Francisco, California
అక్షాంశరేఖాంశాలు	37°45′36″N 122°26′51″W / 37.7599302°N 122.4474712°W
విస్తీర్ణం	2.87 ఎకరాలు (1.16 హె.)
నవీకరణ	1977
నిర్వహిస్తుంది	San Francisco Recreation and Parks

Forbury Gardens
Forbury Gardens
	Location within Reading Town Centre
రకం	Public
స్థానం	Reading, Berkshire, UK
అక్షాంశరేఖాంశాలు	51°27′25″N 0°58′2″W / 51.45694°N 0.96722°W

మూస డాక్యుమెంటేషన్[view] [edit] [చరిత్ర] [purge]

If the park is an IUCN listed protected area, then editors should consider using {{Infobox protected area}}.

This Infobox template can be used in any article about a park, nature reserve or garden.

Usage

Most commonly used parameters

All parameters grouped by function

{{Infobox park| name = | photo = | photo_width = | photo_caption = | map = | map_width = | type = | location = | nearest_city = | lat_d = | long_d = | region = | source = | coords_ref = | area = | created = | operator = | visitation_num = | status = | awards = | open = | website = <!-- {{URL|example.com}} -->}}

{{Infobox park| name = | alt_name = | photo = | photo_width = | photo_caption = | photo_alt = | map = | map_width = | map_caption = | map_alt = | map_label = | map_label_position = | relief = | mark = | x = | y = | grid_ref_UK = | grid_ref_Ireland = | lat_d = | lat_m = | lat_s = | lat_NS = | long_d = | long_m = | long_s = | long_EW =

| region = | dim = | scale = | source = | format = | display = | coords_type =  | coords = | coords_ref = | type = | location = | nearest_city = | area = | elevation = | created = | designer =| etymology = | operator = | visitation_num = | visitation_year = | visitation_ref = | status = | awards = | open = | camp_sites = | hiking_trails = | other_info = | website = <!-- {{URL|example.com}} -->|child = |embedded = }}

Parameter descriptions

This table describes all parameters which can be used in build park infobox. Only the name parameter must be assigned a value.

Field name	Description
`name`	Required. The name of the park. It will be displayed at the top of the infobox. In most cases this should be the same as the article name less any disambiguation. For example if the article title is Hyde Park, London then `name=Hyde Park`.
`alt_name`	If there is a common English name for the park use it for the `name` parameter. This parameter can be used to display the name in the local language or for an alternate English name if it is commonly used. If you would like to italicize the text use wiki markup.
`photo`	The name of an image file to be displayed. No special formatting is needed.
`photo_width`	Can be used to change the display width of the image. The default and maximum value is 284 pixels. Images with a horizontal orientation (landscape mode) will generally display well at the default setting. An image with vertical orientation (portrait mode) may need to be adjusted to 180 or 220. For example `photo_width=200` and not `photo_width=200px`.
`photo_alt`	Alt text for the photo, for visually impaired readers. See WP:ALT.
`photo_caption`	The caption that will appear below the image if one is required.
`location`	The location of the park. Don't be too precise. County, state and country are good in the USA. If the park is within a city specify the city, state and country. If the park is in multiple counties just list the state and country. For areas in other countries adjust accordingly.
`nearest_city`	Recommended if the park is not in a city. It could be a city or large gateway town where supplies and lodging are available.
Map related parameters
`map`	The name of the map to be displayed. See Map display methods.
`map_width`	Can change the display width the map. The default and maximum width is 284 pixels, but usually the map should be much smaller. For example `map_width=200` and not `map_width=200px`.
`map_alt`	Alt text for the map. See WP:ALT.
`map_caption`	The caption that appears below the map if one is required.
`map_label`	A text message that will be displayed next to the mark. Works with `label_position` below.
`map_label_position`	Specifies the position of a label with respect to the mark. This is not functional when using the pixel coordinates method for map display. It must be assigned a value or the label will not display. Valid values are `left`, `right`, `top` and `bottom`. See `label` above.
`relief`	Selects a relief map when assigned any value. This is not functional when using the pixel coordinates method for map display. See Map display methods.
`mark`	The image used for the mark on a map. The default is Red pog.svg. Look here for other images.
`x` `y`	Specifies the position of the location mark on some types of maps when the pixel coordinates method for map display is used. The coordinates of the mark in pixels based on a map width of 1000 pixels. The template will scale these values for proper display.
Coordinate related parameters
`grid_ref_UK`	If the park is in Great Britain, the British grid reference. For parks outside of Great Britain, this field is not applicable and therefore should be removed if it is present.
`grid_ref_Ireland`	If the park is in Ireland (whether Northern Ireland or the Republic), the Irish grid reference. For parks outside Ireland, this field is not applicable and therefore should be removed it it is present.
`coords`	For the {{Coord}} template. Will not generate a location mark if a map template is used. When this option is used the `type`, `region`, `scale`, `source`, `format` and `display` parameters are not functional but this data can be entered in the Coord template. The defaults should be `type:landmark` and `display:inline,title`.
`lat_d`	The degrees of latitude. This value can be specified as a decimal degree and when this format is used minutes and seconds should not be specified. See below.
`lat_m`	The minutes of latitude.
`lat_s`	The seconds of latitude.
`lat_NS`	N if north of the equator, S if south of the equator. Other values will be disregarded.
`long_d`	The degrees of longitude. This value can be specified as a decimal degree and when this format is used minutes and seconds should not be specified. See below.
`long_m`	The minutes of longitude.
`long_s`	The seconds of longitude.
`long_EW`	E if East of the prime meridian, W if west of the prime meridian. Other values will be disregarded.
`coords_ref`	Can be used with either coordinate display method above. Strongly recommended. Specify a citation for the coordinates using `<ref>...</ref>` tags.
`coords_type`	Type is one way to specify the scale of maps generated by external map websites. See type for valid values. The default value is `landmark`. If no type is appropriate consider using the `scale` parameter below.
`scale`	Determines the zoom factor for external map websites. See scale. The value is 1:10,000 for the default type which is `landmark`. Using `scale=50000` will change the zoom to 1:50,000.
`region`	A country code. See ISO 3166-2:US, ISO 3166-2 and ISO 3166-1 alpha-2. For example US-OR is the code for Oregon. This computer readable code is recommended. It will not be displayed. See region.
`source`	Source of the coordinate data. See source. For example gnis or ngs, etc. It will not be displayed. Not all possible values are recognized.
`format`	Determines the format of the coordinates displayed. Valid values are `dms` for degrees, minutes and seconds, and `dec` for decimal degrees. The default value is `dms`.
`display`	Determines where the coordinates will be displayed. Valid values are `inline` and `inline,title` and their variants. The default is `inline,title` and is recommended.
Other parameters
`area`	Area of the protected park. Usually in acres or square miles for US locations and hectares or square kilometres elsewhere. The {{convert}} template should be used. Very small areas might be specified in square feet, square yards or square metres.
`elevation`	Elevation of the park if it is noteworthy. The {{convert}} template should be used.
`created`	The date the protected park was created. Use {{start date}}. For example, for Hyde Park, London, use {{start date\|1637}} since only the year is known.
`visitation_num`	The number of visitors in a recent year if known.
`visitation_year`	The year during which the number of visitors was counted.
`visitation_ref`	Used with the visitation parameters above. Highly recommended. Specify the a citation for the visitation data using `<ref>...</ref>` tags.
`etymology`	The etymology of parks name. Should be very brief or only included in the text of the article.
`operator`	The agency or organization which controls or owns the park. Hide park, London is operated by The Royal Parks
`open`	The hours, days, or months that the park is open.
`status`	The status of the park. e.g. "Closed for restoration", or "Closed due to budgetary considerations." Sometimes used as an alternative to `open`. e.g. "Open all year."
`awards`	Any awards given to the park; for example, Green Flag Award in the UK.
`child`	Used to embed this template in another. See below.
`embedded`	Used to embed another template in this one. See below.
`website`	Website. Use {{URL}}.

Map display methods

Geographical coordinates method

A mark can be superimposed on one of a set of special map templates. If a valid map name is specified this is the method the template will attempt to use. To display a mark the geographic coordinates must be specified using the parameters lat_d, long_d, etc. The mark will not be displayed if the {{Coord}} template is used. See the documentation for {{Location map}}. The parameters for this template map to a subset of the parameters for Location map. A map template can be found using these sources:

List of templates - Many of the items listed here are redirects and a few templates may not function as expected.

Category:Location map templates - templates sorted by category.

Special:WhatLinksHere/Template:Location map/Info - a search that might help.

Special:Prefixindex/Template:Location map - another search that might help.

All of the names begin with the words "Location map" followed by the area covered. The value you need to specify is the area name. The map template for the for Alberta, Canada is Location map Canada Alberta. In this case specify map=Canada Alberta.

మూస:Infobox Park

{{Infobox Park| name = The Green Park| type = Public park| location = [[London]]| map = England| map_width = 175| lat_d = 51 | lat_m = 30 | lat_s = 15 | lat_NS = N| long_d = 0 | long_m = 8 | long_s = 37 | long_EW = W| area = {{convert|19|ha}}| created = | operator = [[The Royal Parks]]}}

XY coordinate method

A mark can be superimposed on any image using x and y coordinates. Use a graphics editor such as GIMP or XnView to scale (resize) the image to a width of 1000px. Use the pixel coordinates of the park in this image The template will scale these values so that the mark will displayed correctly.

x is the pixel offset of the mark from the left edge of an image 1000px wide.

y is the pixel offset of the mark from the top edge of an image 1000px wide.

{{Infobox park| name = Forbury Gardens| type = [[Public park|Public]]| location = [[Reading, Berkshire|Reading]], [[Berkshire]], [[United Kingdom|UK]]| coords = {{coord|51|27|25|N|0|58|2|W|type:landmark_region:GB}}| map = Location map United Kingdom Reading Central.png| map_width = 240| map_caption = Location within Reading Town Centre| x = 672| y = 460}}

Compatibility method

A third method is maintained for backwards compatibility. It is not recommended. See Template:Infobox map#Compatibility method.

See template:Infobox map/coordinate syntax for map syntax.

Examples

{{Infobox park| name = Tank Hill Park| alt_name =| photo = Tank Hill, San Francisco.jpg| photo_width = 256| photo_alt = | photo_caption = Tank Hill from below | map = San Francisco County| map_width = 208| map_caption = | type = Natural Area| location = [[San Francisco]], [[California]]| lat_d = 37.7599302| long_d = -122.4474712| region = US-CA| source = gnis| area = {{convert|2.87|acre|2}}| created = {{Start date|1977}}| operator = San Francisco Recreation and Parks| visitation = | open = }}

{{Infobox park| name = Edworthy Park| photo = Calgary-Edworthy Park.JPG| photo_width = | photo_caption = Bow River seen from Edworthy Park| type = [[Urban park]]| location = [[Calgary]], [[Alberta]]| coords = {{coord|51|03|41|N|114|09|23|W}}| area = {{convert|1.27|km2|abbr=on|2}}| operator = [[Calgary|City of Calgary]]| visitation = | open = All year| map = Calgary street map.png| map_width = 192| map_alt = | map_caption = Location of Edworthy Park in Calgary| x = 335| y = 467}}

Template embedding

This template can be embedding in another infobox template by adding the code |child=yes. To embed another template in this one use |embedded={{Infobox ....

Microformats

The HTML mark up produced by this template includes an hCard microformat, which makes the place-name and location parsable by computers, either acting automatically to catalogue article across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to an address book. For more information about the use of microformats on Wikipedia, please see the microformat project.

If the place or venue has an "established", "founded", "opened" or similar date that is specific to the day, use {{start date}} unless the date is before 1583 CE. If it has a URL, use {{URL}}.

hCard uses HTML classes including:

adr
category
country-name
extended-address
fn
label
locality
nickname
note
org
street-address
url
vcard

Please do not rename or remove these classes nor collapse nested elements which use them.

The above documentation is transcluded from మూస:Infobox park/doc.
Editors can experiment in this template's sandbox and testcases pages.
Add categories to the /doc subpage. Subpages of this template.