How to Use a Light Microscope

Light microscopes are used by scientists and science lovers alike to magnify small specimens like bacteria. They are less powerful than alternatives like electron microscopes but also much cheaper and more practical for casual use. By focusing light on their lenses, they allow you to examine the smallest cellular constructs that make up the specimens. But first, you need to set up a slide and adjust your microscope's light and focus!

Part 1

Part 1 of 2:

Setting up Your Slide

Download Article

1
Connect your light microscope to an outlet. If your light microscope uses an illuminator, it requires power. Place your microscope on a flat surface and connect its power cord into an outlet. Now, flip on the light switch, which is typically located on the bottom of the microscope. After flipping the switch, the light should come out of the illuminator, which is the light source.^{[1]XResearch source}
- If your microscope uses a mirror instead of an illuminator to focus natural light onto your slide, skip this step.
2
Rotate the revolving nosepiece to the lowest power objective lens. Often, this is "3.5x" or "4x," although other microscopes might have lower or higher options. Regardless, the lowest power lens is the shortest in length. Once you hear the lens click into place, stop rotating the nosepiece.^{[2]XResearch source}
- Be gentle as you rotate the nosepiece to avoid breaking it or wearing it down.
Advertisement
3
Place a glass cover or coverslip over your specimen. If you haven't done so already, cover your specimen slide with a glass cover or coverslip. This will protect the specimen and the objective lens, which is the vertical lens that hovers over the slide.^{[3]XResearch source}
- If your microscope doesn't come with glass covers or coverslips, purchase them from online suppliers.
4
Mount your specimen onto the stage using its metal clips. Underneath the lens is a square, flat surface with 2 metal clips that run parallel. This is called the stage and it is responsible for holding the specimen. Press down on the back end of each stage clip to raise them and slip the slide underneath the clips. Center the slide so that each clip rests on its left and right end and the sample is directly in the middle.^{[4]XResearch source}
- Manually adjust the metal clips until your slide is even.
- If your microscope has a mechanical stage, move the curved metal slide holder to the side. Now, insert your specimen flush against the straight, stationary slide holder and release the curved piece so it moves back into place.
5
Rotate the focus knob/coarse adjustment knob until the objective lens hovers over the slide. The focus knob is typically the large knob located to the right of the microscope. Turning the focus knob either moves the objective lens or the stage. Adjust the objective lens until it is directly over the slide, with enough space in between to fit a piece of paper.^{[5]XResearch source}
- Never let the focus knob touch the coverslip.

Part 2

Part 2 of 2:

Adjusting Light and Focus

Download Article

1
Move the slide until it's focused in the center. Gently move the slide around with one of your hands so that the image is in the center of your vision. Once the light provides the clearest image, stop adjusting.^{[6]XResearch source}
- If you're using a low-power objective lens, you might need to decrease the light intensity or turn the condenser off.
2
Adjust the mirror, illuminator, and/or diaphragm for maximum light exposure. If your microscope has a mirror, adjust its position under the stage until it reflects the maximum amount of light onto your slide. For microscopes with illuminators, rotate the rim around the condenser that is underneath the stage until it focuses the maximum amount of light. Similarly, the diaphragm is the rotating disc located under the stage that has varying holes for different light intensities—rotate it until you achieve the maximum.^{[7]XResearch source}
- Whether your microscope has a mirror or illuminator, be sure that the light is focused directly onto the middle of the sample or condenser, respectively.
3
Adjust the coarse and fine adjustment knobs until the image is focused. Locate the eyepiece, which extends diagonally toward you. Look through the eyepiece as you adjust the knobs. Turn the coarse adjustment knob (the larger one) so that the objective lens moves upward and away from the slide in centimeter increments until the image comes into focus. Now, if necessary, use the fine adjustment knob (the smaller one) to move the lens in millimeter increments for additional clarity.^{[8]XResearch source}
- If your microscope has a moving stage, turning the coarse adjustment knob will shift it up and down. Turn the knob so that the stage moves downward and away from the lens.
4
Switch to the next powerful objective lens and make final focus adjustments. Rotate the revolving nosepiece to the objective lens that is next in terms of magnification intensity. After switching upward in intensity, adjust the fine focus knob to make any minor adjustments for clarity. At this point, your image should only need minimal focusing.
- If you can't focus the image properly, readjust the focus knob until the objective lens hovers over the image. Now, repeat the previous steps to readjust the mirror, condenser, and diaphragm, as well as the coarse and fine adjustment knobs.
5
Examine your specimen! Always keep both eyes open. Even though you're only using one eye to look through the lens, closing the other eye can strain your eyes. And remember: everything is backward and upside down! Moving the slide to the right puts the image to the left and vice versa.^{[9]XResearch source}
- When you're done examining your specimen, turn the objective lens knob until it is at the highest point from the specimen. Turn the nosepiece back to the lowest power lens, carefully remove the slide, and place a cover on your microscope.

Community Q&A

Search

Add New Question

Question
How do you use a light microscope to observe cells?
How.com.vn Staff Editor
Staff Answer
This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
How.com.vn Staff Editor
Staff Answer
To observe some of your own cheek cells, take a swab of the inside of your cheek and wipe it on a glass slide. Carefully place a glass cover slip over the cell sample, lowering it slowly from an angle so that you don’t trap any bubbles. Put the slide on the microscope stage and clip it in place. Use the shortest lens (lowest magnification) first and adjust the coarse focus knob until you can make out the individual cells. Switch to a higher-powered lens and adjust the fine focus knob so that you can see the cells in greater detail.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 14 Helpful 8
Question
How does a microscope work?
How.com.vn Staff Editor
Staff Answer
This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
How.com.vn Staff Editor
Staff Answer
A microscope works by passing light through 2 or more lenses, which bend the light rays in order to make them appear larger. The mirror on the microscope helps concentrate the light and direct it up through the lenses to your eye so that you can see objects on the slide more clearly.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 2 Helpful 12
Question
What are the advantages of a light microscope?
How.com.vn Staff Editor
Staff Answer
This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
How.com.vn Staff Editor
Staff Answer
Light microscopes are smaller, easier to use, and less expensive than electron microscopes. They also allow you to observe living cells in action, whereas this is not possible with an electron microscope.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 5 Helpful 13

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Always hold the microscope with both hands. Grasp the arm with one hand and hold the base for support using your other hand.
Thanks
Helpful4 Not Helpful1
Keep the microscope covered when you're not using it.
Thanks
Helpful4 Not Helpful0