How to Unclog an AC Drain Line in an Attic

A clog in the drain line of an attic AC unit is a homeowner’s worst nightmare. It can potentially cause extensive and expensive water damage. Luckily, it is usually easy to clear out a clog. A powerful wet/dry vac and proper hose attachment can take care of most jobs. You can also help prevent clogs from occurring in the future. Just treat your AC system’s drain lines with chlorine tablets or bleach at least once a year.

Method 1

Method 1 of 2:

Clearing Out a Clog

Download Article

1
Buy or rent a wet/dry vac with attachments if you don’t have one. To clear out your clog, you can use a standard wet/dry vac with a 10–12 US gal (38–45 L) tank. Make sure you also have an attachment that will connect the wet/dry vac to the drain line. An attachment with a ³⁄₄ in (1.9 cm) opening should work well.^{[1]XResearch source}
- If you don’t own a wet/dry vac, you can rent one from most large home improvement stores, or purchase one for anywhere between $25 and $550.
- More expensive models are designed for heavy use by contractors and home renovators. For a job like unclogging an AC drain line, a cheaper model should work well enough.
2
Turn off power to your AC unit at your fuse box. Your fuse box may be in your garage, your basement, a storage room, or a hallway. It is a metal box, usually flush with the wall. Open the panel and look for a switch labeled “HVAC.”^{[2]XResearch source}
- If you cannot find the correct switch, turn on the AC system’s fan at your thermostat. Then flip switches in your fuse box one by one until you find one that turns the fan off.
Advertisement
3
Find the condensate drain line and drain line access point. Look for white PVC pipe around ³⁄₄ inch (1.9 cm) in diameter coming out of your AC system’s indoor unit. Most, but not all, AC units will have an easy-to-locate access point to the drain line. Look for an upside-down or sideways “T” shape of PVC pipe with a removable cap.^{[3]XResearch source}
- Alternatively, you can find where the condensate line exits your house. Look for a PVC pipe, approximately ³⁄₄ in (1.9 cm) in diameter, poking out of your house’s exterior wall. It will most likely be located near the outside unit of your AC system.^{[4]XResearch source}
- If you’re having trouble finding the access point to the drain line, refer to the owner’s manual for your particular AC unit.
4
Use the suction hose of a wet/dry vac to suck the clog out. Remove the cap from the condensate drain line. Fix the hose attachment to the wet/dry vac’s hose, and position it into or flush with the end of the drain line. Then, use duct tape to seal the gap between the hose and the drain line. Once everything’s connected, turn on the wet/dry vac and let it run for about 3 minutes.^{[5]XResearch source}
- Experiment with different hose attachments to see which one will give you the strongest suction. Hose attachments that fit in or around the end of the condensate drain line with the smallest gap will work best.^{[6]XResearch source}
- Before starting the wet/dry vac, remove its paper air filter, so it doesn’t get ruined.^{[7]XResearch source}
- Alternatively, use an AC drain brush and CO₂ drain gun to remove the clog.
5
Disconnect the attachment and empty the wet/dry vac’s tank. Once you’ve sucked the clog out of your drain line, disconnect the attachment from the drain line. Then unplug the wet/dry vac. Remove the lid and the hose, and empty the liquid in the tank into a suitable drain, such as one located in your garage.^{[8]XResearch source}
- To determine if you’ve sucked the clog out of the drain line, open your wet/dry vac so you can see the inside of the tank. If you’ve successfully sucked out the clog, you will see solid chunks of mold and mildew in the tank. If you don’t see this, reattach the hose to the drain line and try again.
- If your wet/dry vac has a drain located at the bottom of its tank, simply position your tank over a household drain and unscrew the cap.
6
Check to see if your AC unit is working properly. Once you’ve sucked out the clog with your wet/dry vac, be sure to reattach the cap you removed from the AC drain line. Then, turn the power to your AC unit back on.^{[9]XResearch source}
- Monitor the drain line of your AC unit over the next several days and weeks to make sure water is draining properly.

Method 2

Method 2 of 2:

Preventing Clogs in Your AC Drain

Download Article

1
Empty any standing water in the AC drain pan manually. If your AC system has a drain pan, check it regularly to see if there’s any standing water. Emptying standing water from the drain pan on a regular basis will help prevent the growth of algae, which is one of the major causes of clogs in AC drains.^{[10]XResearch source}
- Remove any debris from the drain pan on a regular basis, as well.
- Empty your drain pan daily during warm-weather months if there’s standing water.
2
Use condensate pan tablets to prevent drain clogs. Place chlorine tablets in your drip pan to prevent the growth of algae. Buy chlorine tablets that are designed to be used in AC condensation drain pans. Follow the directions listed on the package for how many tablets to use and how often you should add them to your system.^{[11]XResearch source}
- You can purchase these tablets at most major retailers and home improvement stores.
- The tablets in the drain pan will treat the water before it flows into the condensation drain line, helping to prevent the growth of slime and sludge inside the drain line.
- You may need to add tablets as frequently as every month.
3
Insert chlorine tablets directly into the drain line if there’s no drain pan. Find the drain lines running out of the indoor unit of your AC system. Then find the access pipe, which should look like an upside-down “T.” Unscrew the cap on the pipe and drop in the tablets.^{[12]XResearch source}
- Follow the directions printed on the package of the specific tablets you purchase.
- A lot of algae build-up occurs during cool-weather months when you don’t use your air conditioner, when there’s no steady flow of water running through the lines.
4
Pour 1 cup (240 mL) liquid bleach into the line as a cheaper alternative. Pour the bleach into the access pipe at the top of the drain line. Flush your line with bleach once a year, or every 2-3 months if you live in an humid environment.^{[13]XResearch source}
- Since bleach is a liquid, it won’t work quite as effectively as the chlorine tablets, which dissolve gradually and coat the inside of the drain line.

Expert Q&A

Search

Add New Question

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Replace your AC filters frequently to help prevent clogs in the future.
Thanks
Helpful0 Not Helpful0
A stain on your ceiling is one possible sign that there may be a clog in your AC drain line.
Thanks
Helpful0 Not Helpful0