How to Build a Concrete Foundation

Step-by-step instructions to construct a concrete foundation for a variety of projects

A concrete foundation is a base for a structure.^{[1]XResearch source} The type and size of concrete foundation you will need is based on the structure you will place upon it. You may need a concrete foundation for a fountain, or your patio furniture, or even for an air conditioner unit.

Steps

Download Article

1
Choose the type of foundation to build. The type of foundation depends on the area of the foundation will be located on and the type of structure that will be placed on it.^{[2]XResearch source}
- Shallow foundations are built on level ground and hard surfaces.^{[3]XResearch source} Shallow foundations are no more than 3 feet (0.91 m) (91.44 cm) deep and are used primarily for smaller, simpler projects like holding patio furniture, a fountain, or an air conditioning unit.
- Deep foundations are used for more complex projects.^{[4]XResearch source} Deep foundations are also used when soil conditions are poor or when building a structure on a hill. Deep foundations are more than 3 feet (0.91 m) (91.44 cm) deep and can have varying depths throughout. This type of foundation is suited for a shed or a detached garage.
Add 2 feet (0.61 m) (60.96 cm) on either side.^{[5]XResearch source} This properly spaces the form work and allows you the space you need to lay your foundation.
Advertisement
Situate and lay down the boards in the planned foundation shape and size.
Adjustments to the form can not be made after the concrete is poured. Because concrete is very heavy, be extra sure your formwork is strong and firmly in place.
5
Make your concrete.^{[6]XResearch source}
- Dump the dry cement into the wheelbarrow.
- Add the water very slowly. Stir constantly.
- Stir the mixture thoroughly. Mix in just enough water so your cement is chunky. Don't let the mixture get too soupy.
- Remember to wear safety glasses, gloves, and a mask when mixing concrete.^{[7]XExpert SourceGerber Ortiz-Vega
  Masonry SpecialistExpert Interview. 10 March 2020.}
6
Make your concrete foundation.^{[8]XResearch source}
- Pour your ready concrete into your form.
- Use your trowel to level it off and smooth it over.
- Make grooves with your trowel if you want a non-slippery surface.^{[9]XResearch source}
7
Finish your concrete.^{[10]XResearch source}
- Let the concrete dry.
- Remove the forms after the concrete thoroughly dries. This will take at least 24 hours.
- Keep the concrete wet to avoid cracking if it's hot outside.^{[11]XExpert SourceGerber Ortiz-Vega
  Masonry SpecialistExpert Interview. 10 March 2020.} Soak it with a hose at least twice daily, three times if it is very hot outside.^{[12]XResearch source}
- Cover the pad if it looks like rain. Rain can cause depressions in the concrete and cause your foundation to be uneven.

Expert Q&A

Search

Add New Question

Question
How deep does a concrete foundation need to be?
Gerber Ortiz-Vega
Masonry Specialist & Founder, GO Masonry LLC
Gerber Ortiz-Vega is a Masonry Specialist and the Founder of GO Masonry LLC, a masonry company based in Northern Virginia. Gerber specializes in providing brick and stone laying services, concrete installations, and masonry repairs. Gerber has over four years of experience running GO Masonry and over ten years of general masonry work experience. He earned a BA in Marketing from the University of Mary Washington in 2017.
Gerber Ortiz-Vega
Masonry Specialist & Founder, GO Masonry LLC
Expert Answer
It depends on how high you want to make the wall. For instance, if I need a two foot brick wall, I will pour a solid eight inch foundation. The foundation would be eight inches of pure concrete, and I would also put in rebars facing upwards in the concrete, and then I'll place the cinder blocks. After the cinder blocks and the foundation are ready, I can start laying in the bricks.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 2 Helpful 3
Question
What is used to make concrete?
jacob jabben
Community Answer
The paste, composed of portland cement and water, coats the surface of the fine (small) and coarse (larger) aggregates. Through a chemical reaction called hydration, the paste hardens and gains strength to form the rock-like mass known as concrete.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 3 Helpful 17
Question
How do I repair a block foundation?
jacob jabben
Community Answer
First find what's wrong with the foundation. For example, if it is a damaged block, you need to remove the block and measure the length of the gap or missing block. Mix up molder and replace the new block, making sure it rests evenly.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 7 Helpful 19

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Be sure and clean all your tools right after using them. Hardened concrete is difficult to remove and can damage your tools.^{[13]XExpert SourceGerber Ortiz-Vega
Masonry SpecialistExpert Interview. 10 March 2020.}
Thanks
Helpful0 Not Helpful0