How to Test Soil pH

Do you want to plant a garden? Then it is important to know about the pH of your soil. The pH is a measure of the soil's acidity or alkalinity. Different plants require different pH levels to thrive. Once you know your soil's pH, you can adjust your garden accordingly to help your plants grow. Getting a measurement is easy, and there are a number of different ways to do it.

Method 1

Method 1 of 3:

Testing Soil pH with a Commercial Test Probe

Download Article

Dig a small hole in the soil. Use a trowel or spade to dig a hole 2–4 inches (5.1–10.2 cm) deep. Break up the soil within the hole and remove any twigs or foreign debris.
Use distilled (not spring) water. You can find this in your local pharmacy. Rainwater is slightly acidic, and bottled or tap water tends to be slightly alkaline. Fill the hole until you have a muddy pool at the bottom.
Advertisement
Make sure your tester is clean and calibrated (for a more exact measurement). Wipe the probe with a tissue or clean cloth, and insert it into the mud.
4
Hold it there for 60 seconds and take a reading. pH is usually measured on a scale of 1-14, though the tester may not include this entire range.
- A pH of 7 indicates neutral soil.
- A pH above 7 indicates alkaline soil.
- A pH below 7 indicates acidic soil.
A single reading may be an anomaly, so it's good to get an idea of the average pH in a plot. If they're all around the same, take the average and amend the soil accordingly. If one spot is very different than the rest, however, you may need to "spot treat" it.

Method 2

Method 2 of 3:

Using Paper Test Strips

Download Article

Test strips, also known as litmus paper, are a quick and easy way to measure the pH of your soil. You can purchase them online or at your local garden store.^{[1]XResearch source}
Take a handful of the soil you'd like to test and put it in a bowl. Then, pour some distilled water into the bowl until the dirt is the consistency of a milkshake. You can give the mixture a stir to ensure the water is fully incorporated.^{[2]XResearch source}
Holding your pH test strip at the non-reading end, dip the strip into the dirt mixture for 20-30 seconds. This test time can vary, so consult the directions on your specific test strips to determine the proper dipping time. When the test time is up, lift the pH strip from the water, and dip it briefly in distilled water to clean off the dirt.
Use the key included in your pH test kit to read the pH of your soil. Normally this key is color-coded. Compare your strip to the colors available, and select the one that most resembles your result. The key will equate this color with the pH number of your soil.^{[3]XResearch source}

Method 3

Method 3 of 3:

Changing Your Soil pH

Download Article

1
Make your soil less acidic. If your soil pH tested below 7, add a cup of dolomite or quick lime to the soil. Mix well, then retest with your probe. Use this method to slowly change the pH of your soil. Wood ash in moderation helps as well. Both are available at local gardening centers.
- Follow the advice in your commercial test probe kit to determine how much of these substances you will need to add to achieve the desired pH. If you need to change your soil pH level more than one full point, contact a local gardening professional. They can help you calibrate your soil so it can be amended most successfully.^{[4]XResearch source}
2
Make your soil less alkaline. If your soil pH tested above 7, add a cup of organic matter, such as pine needles, peat moss, or decomposed tree leaves. Then, retest the soil to gauge the new pH. Add additional cups, testing as necessary, until you reach the desired level. Sulfur is very effective as well.
- Use the instructions in your commercial test probe kit to determine how much of these additives you will need to add to achieve your desired pH. If your soil needs to be adjusted more than a full pH point, contact a local gardening or landscaping professional. They can help you calibrate your soil to the right level through an on-site evaluation.^{[5]XResearch source}
For example, add sulfur to a certain area of your garden to encourage beautiful blue blooms on your hydrangeas, which prefer more acidic soils. The pH of your soil does not need to be uniform your entire garden over; feel free to alter it to support different plants. You can consult the Old Farmer's Almanac to determine the best pH for your particular garden. Some plants prefer a pH of 7 while some fruits favor a lower pH.

Community Q&A

Search

Add New Question

Question
Can you use pH strips to test soil?
How.com.vn Staff Editor
Staff Answer
This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
How.com.vn Staff Editor
Staff Answer
Certainly, you can use pH strips to test soil. The second method above explains the process for using them: How to Use Paper Test Strips.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 0 Helpful 3
Question
How is soil pH measured?
How.com.vn Staff Editor
Staff Answer
This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
How.com.vn Staff Editor
Staff Answer
The pH of soil is worked out by measuring the hydrogen ion activity in a liquid solution. Soil pH can be measured in several ways, depending on what is available to you. Typical ways to measure soil pH are: Using a commercial test probe or glass electrode, or a colorimetric test kit, or by using test paper strips. The methodology for measuring is explained in the steps above.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 1 Helpful 3
Question
How do you test pH paper in soil?
How.com.vn Staff Editor
Staff Answer
This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
How.com.vn Staff Editor
Staff Answer
To use pH test strips for testing soil, see the full instructions in this How.com.vn: How to Use Paper Test Strips.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 2 Helpful 2

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Record your results. You may need to reference your test results at a later date, as they may change over time.
Thanks
Helpful1 Not Helpful0
Prevent contamination (and incorrect readings) by making sure your pH tester probe and your spade are clean. Do not handle soil with your bare hands.
Thanks
Helpful0 Not Helpful0
Take multiple soil readings with each test. A minimum of six samples from different parts of your garden is a safe amount.
Thanks
Helpful2 Not Helpful0

Show More Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!

Warnings

As noted above, the water you pour into the hole can affect your reading if the pH of the water is not neutral. Use distilled water for all testing.
Thanks
Helpful28 Not Helpful13
Some testers will function differently than that described in this article. Always make sure to read the manufacturer's instructions carefully to ensure accurate readings.
Thanks
Helpful20 Not Helpful19