How to Taper Trouser Legs

Tapered trousers are stylish and they can make an outfit look much more polished. However, trousers are often loose-fitting and hiring a professional tailor to fit them for you can be expensive. Tapering trousers yourself is an easy way to improve the fit of your pants and save some money in the process! You will just need to figure where to taper the pants, cut and pin the fabric, and then sew a new seam.

Part 1

Part 1 of 3:

Determining Where to Taper the Pantlegs

Download Article

1
Turn the pants inside out and put them on. Put on the trousers if you want to taper them for yourself, or have the person you are tapering the pants for put them on. Make sure the pants are turned inside out. You will need to draw a line on them that will not be visible after sewing.
- Turning the pants inside out also exposes the old seam and this will make it easier to remove the stitches, cut the fabric, and sew the new seam.
2
Pinch the edges of the pants where you want to taper them. Pinch along the inside and outside of the pants to find where you want to taper them. Depending on the fit you want, you may need to remove a significant amount of fabric or just a little. Pinch the pants along the inner and outer seams to find the best fit.
- For example, if you want the tapering to begin around your knee, then pinch the fabric on the inside and outside of your knee to find the best place to create a new seam.
Advertisement
3
Have a friend draw a line where you want a new seam to be. It will be difficult to draw on the pants while you are wearing them, so it is best to ask a friend for help with this part. Have them draw along the inside of where you are pinching the pantlegs.
- You can try to mark the fabric yourself, but keep in mind that you will still need to pinch it while you mark it to get the best results.
4
Insert pins and then draw a line if you don't have anyone to help you. If you don't have anyone who can help you by drawing a line where you are pinching, you can also insert pins into the areas where you want to taper the pant legs. Insert a pin about every 1 to 2 inches (2.5 to 5.1 cm) where you want to taper the pants. Then, draw a chalk line along the inner edges of the pins after you remove the pants.
- Make sure the pins are vertical (parallel to the seam). This will make it easier to create a seam line after removing the pants.
5
Lay a pair of tapered trousers over the trousers you want to taper. Another option for tapering trousers is to lay the pants out flat and then place a pair of tapered pants over them. Trace the outline of these pants onto your pants.^{[1]XResearch source}
- Make sure to choose a pair of tapered trousers that fit you well. You will be replicating the fit of these pants on your trousers.
6
Check the lines with a ruler after you draw them. Hold the ruler up against the line and go over any crooked spots with the chalk. You can also use a ruler to help you check the distance from the edge of the pants to the lines. This will help to ensure that the right and left legs are the same size.^{[2]XResearch source}
- For example, if the lines are 1.5 inches (3.8 cm) from the edges at the bottom of the trousers on 1 leg, they should be the same on the other leg.

Part 2

Part 2 of 3:

Removing the Old Seam

Download Article

1
Use a seam ripper to take out the old stitches. Keep the pants turned inside out and use a seam ripper to cut the stitches along the areas you want to taper. Run the hooked part of the seam ripper along the stitches to sever them and then gently pull apart the fabric at the seams to loosen the stitches. Pull out the severed thread with your fingers.
- You don't have to remove all of the stitches if you are not tapering the whole leg. Just remove stitches where you want to take in the seam.
2
Create a second chalk line 0.5 in (1.3 cm) from the first line you drew. After the old stitches are out, flatten out the fabric and line up the raw edges. Then, draw a second chalk line about 0.5 inches (1.3 cm) from the first line.
- If the fabric won't lay flat, you may need to iron it.
3
Cut along the second chalk line to remove the excess fabric. The second line you drew onto the fabric will be the new raw edge for the parts of the pants you want to taper. Cut the fabric along this line.
- Use a sharp pair of scissors and cut straight along the lines.
4
Pin the fabric along the first line. After you have finished cutting the fabric, insert pins along the first line you drew on the fabric. This will be the new seam for your trousers. Insert a pin every 3 inches (7.6 cm) along the line to keep the fabric together while you sew.
- Insert these pins perpendicular to the edge of the fabric. This will make it easier to remove them as you sew.
- Repeat this for the other lines.

Part 3

Part 3 of 3:

Sewing the New Seam

Download Article

1
Thread your sewing machine with a durable matching thread. Choose a strong thread for the seams on your trousers. These seams need to be strong, especially if you will be making the trousers slim or skinny. Choose a thread color that matches the color of your fabric as well, such as black thread for black pants.
- Try using a denim thread for a strong, durable option.
2
Set your sewing machine to the straight stitch setting. The straight stitch is ideal for sewing seams on pantlegs and it is an easy stitch to use. This stitch is usually the first setting on sewing machines, but check your instruction manual to be sure.
- Make sure that your sewing machine is set to the recommended tension and stitch length for using the straight stitch.
3
Sew a straight stitch along the first line on the fabric. Sew along the line on your fabric. Sew up from the bottom of the pantleg. If the line goes off the edge of your pants, then sew right off the edge. If the line goes all the way up the pantleg to the crotch, then sew all the way to the crotch.^{[3]XResearch source}
- Make sure to remove the pins as you go. Don't sew over them or you may damage your sewing machine.
4
Backstitch when you reach the end of the line. To backstitch, hold down the lever on the side of your sewing machine and apply gentle pressure to the pedal. This will reverse the direction of the feed dogs (gears under the needle that move the fabric) so you can sew in the opposite direction.^{[4]XResearch source} Backstitch for about 1 to 2 inches (2.5 to 5.1 cm). Then, release the lever and sew to the end of the line again.
- Backstitching will strengthen the ends of your stitches.
After you finish sewing the lines on the first pantleg, switch over to sewing the other one. Repeat the same process so that both pantlegs will have the same amount of tapering.

Community Q&A

Search

Add New Question

Question
Can you take jeans in at the legs?
How.com.vn Staff Editor
Staff Answer
This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
How.com.vn Staff Editor
Staff Answer
Yes you can do this. It’s a lot easier to see step-by-step instructions with images to do this successfully, so we suggest you check out: How to Taper Jeans.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 7 Helpful 17
Question
Can tailors taper pant legs?
How.com.vn Staff Editor
Staff Answer
This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
How.com.vn Staff Editor
Staff Answer
Yes, a tailor is well equipped to taper pant legs. Decide whether you want the tailor to choose the tapering style without your input or whether you want to pre-select the amount to be tapered yourself by pinning it before taking the trousers to the tailor (or just ask the tailor to pin it your way while you’re wearing the pants at the tailor’s). Most tailors will be happy to do it either way, but if you want to be sure that the taper is exactly as you want it, be sure to direct how it is pinned.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 2 Helpful 11
Question
Can I taper the inside seam only?
Community Answer
You should taper both seams, so that the pants do not look and feel weird.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 20 Helpful 78