How to Tape Your Boobs for a Strapless Dress

You pull out a strapless dress from your closet, getting ready for a night out on the town, when you realize you don’t have a strapless bra to wear with it. Have no fear—that's what boob tape is for! With the proper technique, boob tape can replace a bra, giving you lift, support, and cleavage. Curious about how you can tape your boobs to look stunning in a strapless dress? Keep reading for all of the tips and tricks you need.

Method 1

Method 1 of 4:

Bandeau: Lift & Support

Download Article

1
Cut your boob tape into short and long sections. For this bandeau style, you’ll need about 3 short and 2 long pieces of tape for each breast. The short pieces should roughly cover your nipple, and the long pieces will need to be the vertical length of your breast.^{[1]XResearch source}
- Each breast is beautifully unique, and you may need more or less tape than this.
- If you have larger breasts, you may need more tape to cover and support your tissue.
- If you have smaller breasts, you may need less tape and could even cut the tape in half.
2
Lift your breast with one hand and guide a short piece of tape upwards. Start by placing one end of the tape below your nipple, and then pull the other end towards the top of your breast. Rub the tape down to help smooth everything out.^{[2]XResearch source}
- Use a mirror so you can see what you’re doing.
- Try not to touch the underside of the tape too much. The more you touch the tape, the less sticky it’ll be.
Advertisement
3
Put an additional piece of tape on either side of the first piece. Think of it like building the cup of a bra. You want to cover and shape your breast. In the end, you’ll have 3 pieces of short tape running vertically over the front of your breast.^{[3]XResearch source}
- If you need more than 3 pieces of tape to cover your breast, no worries! Each breast is different, so add as many pieces as you need to feel secure.
4
Stretch a longer strip of tape under your breast horizontally. Hold up your breast with one hand, and start taping from the outside in. Rub the tape down, following the “U” shape you’ve just made to cup your breast.^{[4]XResearch source}
- The shorter vertical pieces of tape will overlap with the longer piece of tape, and that’s okay. This gives you an extra layer of support.
Basically, you’re wanting to cover the entire front of your breast like the cup of a bra. Adding extra longer pieces will create more lift and support, so apply as many pieces of tape as you need.^{[5]XResearch source}
6
Repeat on the other breast, and voilà! You have created a strapless and backless bra with boob tape.^{[6]XResearch source}
- If you’re looking for a flatter look, consider wrapping the tape over your bust and cleavage. This will flatten your breasts while creating support.

Method 2

Method 2 of 4:

Crossover: Lift & Cleavage

Download Article

This is how long your tape will need to be.
This taping method is rather simple, but you can always add more pieces of tape if your breasts need more support.
3
Place one piece of tape on the side of one breast and across your ribcage. Stick one end of the tape underneath your armpit at the side of your breast, and then pull the other end across your torso to the bottom of your opposite rib. The tape may land near or on your hip.
- This taping style is in the shape of an “X,” so the first piece of tape will be one of the intersecting lines.
4
Repeat the previous step on the other side. Mirror where you placed the tape on the opposite side, crossing it over your torso and the other piece of tape to create an “X” shape. This cross-style method will push your breasts together and provide a subtle lift perfect for strapless and backless dresses.
- If you’re wearing a backless dress, make sure the ends of your tape don’t show by cutting off any excess.

Method 3

Method 3 of 4:

Horizontal Pull: Lift & Cleavage

Download Article

The number of pieces you’ll need all depends on you and your breasts. Try starting with 3 pieces and cutting more as you go.^{[7]XResearch source}
2
Lean forward and tape the underside of your breasts. Place one side of the tape under an armpit, pulling the end towards the other armpit in a long "U" shape as you stick it to your skin. This will make your breasts look bigger and cleavage pop.^{[8]XResearch source}
- Try not to pull too hard. Remember, you have to give yourself room to breathe, so make sure you're comfortable while taping.
Keep layering the tape higher and higher until you reach where a bra cup would stop. This creates a bandeau-like look that pushes your breasts together.^{[9]XResearch source}
Once you’ve reached the desired lift and support, push down on the top of your breasts.^{[10]XResearch source}
Think about how your dress is cut, and use the neckline as a guide. Basically, you want to smooth out any bulges that lifting your breasts may have caused. Hold your breasts down with one hand, and stick the tape along the top of your previous piece with the other. Now you’re ready to rock your strapless or backless dress!^{[11]XResearch source}

Method 4

Method 4 of 4:

Vertical Pull: Lift & Smooth

Download Article

1
Cut 3 to 5 pieces of tape about the same size as your bra’s cup. This taping method creates the illusion of a strapless, seamless bra, so think about how big your average cup is.^{[12]XResearch source}
- The larger your cup, the more tap you’ll need.
- The smaller your cup, the less tap you’ll need.
Start in the middle of your breast, and rub the tape in place. You may need to use your other hand to hold your breast. This will be tape 1.^{[13]XResearch source}
Overlap the ends of tape 2 with tape 1 at the top of your breast. This will create a triangle-like shape that lifts and smooths.^{[14]XResearch source}
Each piece of tape should start at the base of your breast, come up over your breast, and overlap at the top of tape 1.^{[15]XResearch source}
You’ve got a strapless and backless bra that has the girls looking flawless.^{[16]XResearch source}

Community Q&A

Search

Add New Question

Question
Can this tape cause harm to your breast?
DE_astieger
Community Answer
As long as you don't do it too often, this shouldn't do any harm. If you use it too often, it could weaken your breast tissue. You should also test beforehand to see if you are allergic to the tape.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 11 Helpful 17

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

Soak the tape touching your skin with coconut or Vitamin E oil for 15 minutes before removing. This will help soften the tape so it won’t tug or rip your skin when you pull it off.^{[17]XResearch source}
Thanks
Helpful0 Not Helpful0
Put nipple covers or pasties over your nipples before taping. This extra layer of protection will make removing the boob tape that much easier.
Thanks
Helpful17 Not Helpful4
Make sure your breasts are clean and dry before taping. Boob tape won’t stick to dirty, damp, or wet skin, so make sure everything is freshly washed and dry beforehand.
Thanks
Helpful0 Not Helpful0

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!

Warnings

Never use regular tape to tape your boobs. Doing this can seriously affect your body and possibly rip your nipples off (as disturbing as it sounds). Stick to using tape made for breasts.
Thanks
Helpful15 Not Helpful3