How to Sterilize Bottles

If you’re sterilizing bottles for feeding your baby or other drinking purposes, you have multiple easy options for getting them germ-free. The most popular techniques are using boiling water, a sanitize-certified dishwasher, or the microwave. You can also use bleach if you don’t have access to any of those options. Use these methods for any type of reusable bottle, though if your bottles are plastic, check that they are BPA-free before using any heat option.^{[1]XExpert SourceMor Levy Volner, IBCLC, RDN
International Board Certified Lactation ConsultantExpert Interview. 5 May 2020.} For the best results, sterilize bottles when they are brand new or borrowed, if someone is sick, if you see buildup on them, or if you don’t have access to safe drinking water.

Method 1

Method 1 of 4:

Using Boiling Water

Download Article

To ensure that every part of the bottle gets sterilized, disassemble the entire bottle and all its pieces. Not doing this can cause germs to stay in tiny crevices that are then put in your or your baby’s mouth.^{[2]XTrustworthy SourceCenters for Disease Control and PreventionMain public health institute for the US, run by the Dept. of Health and Human ServicesGo to source}
2
Fill a pot with water and set it to boil on the stove. Choose a pot of an appropriate size to cover all the pieces you are sanitizing with water. Fill the pot with enough water to cover your bottle pieces and set it on a stove burner, but don’t put the pieces in the pot yet. Turn your burner on high and allow the water to boil.^{[3]XTrustworthy SourceCenters for Disease Control and PreventionMain public health institute for the US, run by the Dept. of Health and Human ServicesGo to source}
- To get your water to boil faster, cover the pot with a lid that fits it. Do not put salt or anything else into the water.
Advertisement
3
Place all the bottle pieces in the boiling water for 5 minutes.^{[4]XExpert SourceMor Levy Volner, IBCLC, RDN
International Board Certified Lactation ConsultantExpert Interview. 5 May 2020.} Drop all your bottle pieces into the water once it’s boiling. To avoid getting splashed with hot water, try lowering the pieces gently into the water with a spoon or by dropping them with your fingers just above the water’s surface.^{[5]XTrustworthy SourceCenters for Disease Control and PreventionMain public health institute for the US, run by the Dept. of Health and Human ServicesGo to source}
- After 5 minutes, turn your stove burner off.
4
Remove the items with clean tongs and allow them to air-dry. Do not remove the bottle items with your fingers immediately after they’re finished, or you could burn yourself. Use a set of clean tongs or another utensil to remove the pieces from the water. Set them out on a clean towel or drying rack in an area that’s free from dirt and dust to air-dry.^{[6]XTrustworthy SourceCenters for Disease Control and PreventionMain public health institute for the US, run by the Dept. of Health and Human ServicesGo to source}
- Don’t rub the bottles dry with a towel or you risk transferring germs to them. Leave the bottle pieces in the clean area until you’re ready to use them. Make sure your hands are clean when you reassemble each bottle before using it.

Method 2

Method 2 of 4:

Sterilizing Bottles in the Dishwasher

Download Article

1
Check your dishwasher manual for an NSF/ANSI Standard 184 Certification. NSF/ANSI stands for National Sanitation Foundation / American National Standards Institute. Their Standard 184 applies to dishwashers made with an extended hot-water rinse feature that’s designed to kill 99.99 percent of bacteria when the dishwasher is set to the “sanitize” cycle. Review your owner’s manual to make sure your dishwasher has both this certification and a sanitize cycle.^{[7]XResearch source}
- If your dishwasher doesn’t have this certification and a sanitize cycle, it will not kill as many germs on your items and is not appropriate for sanitizing bottles.
Take all the pieces of your bottles apart; remove the caps, nipples and any other pieces. You want to make sure germs don’t stay in any tiny crevices of the bottles.^{[8]XResearch source}
3
Place the bottles in the top rack of your dishwasher and smaller pieces in a basket. Stand the bottles themselves top-side down in the top rack of your dishwasher. Place the smaller pieces such as the caps or nipples into a dishwasher basket either in the top or bottom rack.^{[9]XResearch source}
- Don’t leave the smaller pieces on a rack outside of a basket, or they may fall out and onto heating elements in the bottom of the dishwasher and become damaged.
4
Run your dishwasher on the “sanitize” setting. Put dishwasher detergent in your dishwasher as you normally would. Press the “sanitize” button on the front of your dishwasher and then the “start” button. Allow the dishwasher to do the entire sanitize cycle before removing the bottle items.^{[10]XResearch source}
- Sanitize cycles in dishwashers sometimes take multiple hours; don’t stop the cycle early, or you risk having bottles that are not sterilized.
5
Allow the bottle pieces to air-dry. You can leave the bottles in the dishwasher until they’re cool enough to touch; if you do this, don’t open the dishwasher before you’re ready to take them out. If you want to take them out right away, use clean tongs to remove them so you don’t burn your fingers.^{[11]XResearch source}
- Put the sterilized bottle pieces on a clean towel or drying rack in an area that’s free from dirt and dust until you’re ready to use them.

Method 3

Method 3 of 4:

Using the Microwave

Download Article

Glass bottles are fine to microwave, but you’ll want to check the packaging of any plastic bottle you’re using before sterilizing it in a microwave. Somewhere on the packaging it should say “microwave-safe,” or provide you with instructions on using a microwave to sterilize it.^{[12]XExpert SourceMor Levy Volner, IBCLC, RDN
International Board Certified Lactation ConsultantExpert Interview. 5 May 2020.}
Remove the caps, nipples, and any other pieces to ensure that germs don’t stay in tiny crevices of the bottles. This is the safest practice to ensure that the bottles are completely sterilized and you or your baby don’t ingest any bacteria.^{[13]XResearch source}
3
Fill bottles halfway with cold water. Use cold water from your faucet to fill your bottles halfway. The water in the bottles will create steam in the microwave when it’s on. The steam in the microwave sterilizes your bottles.^{[14]XResearch source}
- Cold water is better to use any time you are heating water, because lead and other chemicals from your pipes are less likely to get into the water as it’s coming through the faucet.
Take the smaller pieces, such as caps or nipples, and place them into a bowl. Fill the bowl with enough cold water from your faucet so that all the pieces are completely covered.^{[15]XResearch source}
Place the bottles and bowl of pieces into your microwave. Press the “high” button and then set the microwave to be on for 1 minute and 30 seconds. Press the “start” button and wait for the microwave to finish.^{[16]XResearch source}
Make sure your hands are clean and remove the bottle pieces from your microwave. Empty all the water from the bottles and bowl, and place the pieces on a clean towel or drying rack in an area that’s free from dirt or dust until you’re ready to use them.^{[17]XResearch source}

Method 4

Method 4 of 4:

Sterilizing with Bleach

Download Article

Use a basin that’s large enough for all your bottle pieces and water to cover them completely. Then take a liquid measuring cup to measure the correct amounts of bleach and water to fill your basin.^{[18]XTrustworthy SourceCenters for Disease Control and PreventionMain public health institute for the US, run by the Dept. of Health and Human ServicesGo to source}
Disassemble your bottles completely by taking all the pieces apart. This ensures that germs don’t get stuck in tiny crevices in the bottle pieces.^{[19]XTrustworthy SourceCenters for Disease Control and PreventionMain public health institute for the US, run by the Dept. of Health and Human ServicesGo to source}
Place the bottle pieces completely under the solution, checking that all parts of them are completely submerged and there are no air bubbles. If you are sterilizing baby bottles, squeeze the solution through the nipple holes to get it inside the nipples.^{[20]XTrustworthy SourceCenters for Disease Control and PreventionMain public health institute for the US, run by the Dept. of Health and Human ServicesGo to source}
Place all the pieces out on a clean towel or dry-rack in an area free from dirt or dust until you’re ready to use them. Don’t rinse them first; doing that will transfer germs back onto them. Any bleach remaining on the items will break down as they dry and not harm you or your baby.^{[21]XTrustworthy SourceCenters for Disease Control and PreventionMain public health institute for the US, run by the Dept. of Health and Human ServicesGo to source}

Expert Q&A

Search

Add New Question

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

These sanitization methods also work for anything else that goes into a baby’s mouth: pacifiers, teething toys, etc.
Thanks
Helpful4 Not Helpful0
If you’re using a steam-sanitizer or chemical sterilizing tablets, simply follow all the instructions in the manual that the sanitizer or sterilizing tablets came with.
Thanks
Helpful1 Not Helpful0

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!

Warnings

Sterilize your bottles when you first get them, if someone in your family is sick, or if the bottles are especially dirty. Other than that, regular washing should be sufficient. Avoid over-sterilizing reusable plastic bottles, as the chemicals in the plastic can break down eventually.
Thanks
Helpful3 Not Helpful0
These methods are for reusable bottles only. Don’t attempt to sterilize disposable single-use plastic bottles, such as plastic soda bottles. The heat or bleach will cause chemicals in the plastic to break down and you will ingest them next time you use the bottle.
Thanks
Helpful2 Not Helpful0
Stop sterilizing bottles and throw them away if they start showing any signs of damage. Melted, misshapen, or scratched plastic and cracked glass should be thrown away immediately.
Thanks
Helpful1 Not Helpful1
Don’t touch hot bottles with your hands immediately after they are sterilized to avoid burning yourself.
Thanks
Helpful0 Not Helpful0
Sterilize your bottles before every use if you do not have access to safe drinking water. Try to use glass bottles since you should not expose plastic to high heat very often.
Thanks
Helpful0 Not Helpful0