How to Sew Basic Stitches by Hand for Beginners

Sewing is not only a useful skill but a great and fun way to pass the time. There are tons of things you can do with a needle and thread, and all you need are a few basic skills and some imagination! In this article, we’ll show you how to sew a basic straight stitch by hand and introduce you to other beginner stitches you can try. Keep reading because soon you’ll be a sewing pro!

Things You Should Know

Practice making a straight stitch to learn the basics of sewing by hand.
Try other beginner stitches like the basting, zig-zag, and slip stitch for specific sewing or project needs.
Create decorative details on fabric with simple stitches like the backstitch or blanket stitch.

Method 1

Method 1 of 2:

Sewing a Straight Stitch

Download Article

1
Thread your sewing needle and tie the ends of the thread together. When it comes to thread, more is better. Cut at least two times the amount of thread you think you’ll need just to be safe. Then, take one end of the thread between your thumb and forefinger and glide it through the eye of the needle. Guide the thread through the needle until the thread is even on both sides. Pinch the ends of the thread together and tie a small overhand knot at the end.^{[1]XResearch source}
- If you have trouble threading the needle, no worries! Look for sewing needles with larger eyes. These will make threading easier but leave bigger puncture holes.
- Sewing needles come in a variety of sizes, ranging from 8 to 19 to represent the needle’s gauge. The smaller the number, the larger the gauge and thicker the needle will be.^{[2]XExpert SourceAndrea Beaulieu
  Professional Tailor & Fashion DesignerExpert Interview. 8 May 2020.}
- Cut the thread with sharp scissors to keep the ends from fraying.
- Lick the end of the thread, so it’s easier to glide through the needle’s eye.
2
Pierce the needle through the side of the fabric people won’t see. This side of the fabric is often referred to as the “wrong side,” and is typically the inside part of a piece of clothing or stuffed toy.^{[3]XResearch source} For example, if you’re sewing a seam, turn the garment inside out so the “wrong side” is facing out. Poke the needle into the fabric on the far edge of where your stitch will start. Then, pull the needle and thread through until the thread’s knot hits the fabric.^{[4]XResearch source}
- Use gentle pressure when poking and pulling the needle to avoid yanking the thread through the fabric.
- If your knot goes through the fabric, simply make a bigger knot and try again.
Advertisement
3
Guide the needle through the other side of the fabric. Flip your fabric over and pierce the needle through about a ¹⁄₄ in (0.64 cm) from where you poked the first hole, following a straight line. Pull the entire length of the thread through the fabric until you feel resistance—this is your first stitch.^{[5]XResearch source}
- Draw a line on your fabric with a pencil or fabric chalk or marker to use as a guide while you sew.^{[6]XResearch source}
- Pull the thread tight enough for the stitch to lay flat on the fabric but not so tight that it bunches the fabric underneath.
- The bigger the space between your needle pokes, the longer your stitches will be.
4
Continue stitching until you reach the end of the fabric. With each poke of the needle, turn the fabric over. Keep the same distance between stitches by poking the needle in and out with an equal space between each hole. Continue sewing till the end of the fabric or pattern.^{[7]XResearch source}
- A straight stitch is often called a running stitch because it continues in a straight line following a dashed-line pattern, similar to a running path.
Poke the needle through the wrong side of the fabric, but only pull the thread halfway through (this creates a loop of thread). Weave the needle up into the loop and pull snugly until the thread is flat against the fabric—you’ve successfully made a knot! Repeat this 2 to 3 times to ensure the knot stays in place.^{[8]XResearch source}

Method 2

Method 2 of 2:

Other Basic Stitches for Beginners

Download Article

1
Hold two layers of fabric together temporarily with a basting stitch. Fold a piece of fabric to create two folds, or lay two pieces of fabric on top of each other. Pinch together the layers of fabric and insert the needle horizontally. Keeping the needle parallel, drive it into the fabric about ¹⁄₄ in (0.64 cm) away from your first hole. Pull the needle through to make your first stitch. Repeat this process until you reach the end of your pattern or fabric.^{[9]XResearch source}
- This type of stitch can be used to replace sewing pins as it can be easily removed.
EXPERT TIP
Shaelynn Haning
Professional Tailor & Business Owner
Shaelynn Haning is a Tailor & Business Owner based in Tulsa, Oklahoma. Shaelynn is the founder of the highest-rated and most-reviewed alterations and tailoring service in Oklahoma, Tallgrass Tailor, employing a team of skilled craftsmen and women from across the country and the world. Shaelynn is a member of the State of Oklahoma Education Careers and Technologies Board and a member of both the Custom Tailors and Designers Association and the Association of Sewing and Design Professionals. She is the host of The Sew Show with Shae, an entertaining and educational sewing channel posting weekly videos on YouTube. Shaelynn earned her BS in Apparel Design and Product Development from Marist College.
Shaelynn Haning
Professional Tailor & Business Owner
Avoid shortcuts and use good tools to produce quality sewing projects. When sewing, skipping any steps produces worse results. Follow the full process while using sharp scissors and equipment. Even if tools are sentimental, don't use them if they aren't effective. Committing to doing each step right leads to better sewing.
2
Use a zig-zag or catch stitch to help fabric stretch. Pierce the needle through the wrong side of the fabric where you’d like the stitch to start. Pull the thread through, then bring the needle down into the fabric at a diagonal about ¹⁄₄ in (0.64 cm) from your first hole. Push the needle back up through the first hole to create a point—this is your first stitch. Repeat this process going left to right until, creating points by sliding the needle through the first hole of the stitch.^{[10]XResearch source}
- This stitch is most commonly used to sew in elastic waistbands.^{[11]XResearch source}
3
Create an invisible stitch with a slip stitch. Also known as a ladder stitch, a slip stitch binds and closes two pieces of fabric together. To make a slip stitch, pierce the needle on the inside fold of the fabric, so the knot is hidden inside the folded gap or seam. Make a ¹⁄₄ inch (0.64 cm) horizontal stitch on top of the opposite fold across from where you first pierced the needle. Pull the thread through to create a stitch. Continue sewing until you reach the end of the seam or gap.^{[12]XResearch source}
- This stitch is often used to close stuffed animals after they’re stuffed.
4
Sew two pieces of fabric tightly together with a backstitch. Backstitching is basically a straight stitch without any gaps. Push a threaded needle through the underside of 2 pieces of fabric about ¹⁄₄ in (0.64 cm) away from the fabric’s edge. Bring the needle down through the fabric at the edge, moving back from the hole you previously made. Drive the needle horizontally underneath the fabric so that it’s parallel to your body. Note that if the tail end of your thread is bisecting where the needle is going in and out of the fabric, your stitches will be even. Pull the needle through to create your stitch.^{[13]XResearch source}
- This stitch is often used to embroider letters and sew pieces of clothing together.
5
Make a bound seam with a whipstitch. Also known as the overcast stitch, a whipstitch connects 2 pieces of fabric. Sew a whipstitch by bringing 2 edges of fabric together (in this case, these edges are referred to as flaps). Stab a threaded needle through the corner of one flap individually, as this hides the thread’s knot. Pinch the flaps together, and push the needle through both layers from front to back. Pull the thread until it’s flush with the fabric to make your first stitch. Bring the needle back to the front and repeat.^{[14]XResearch source}
- This stitch can be used to hem jeans and close the sides of pillows, cushions, and stuffed animals.
6
Create a decorative border using a blanket stitch. To sew a blanket stitch, put 2 pieces of fabric together or fold a piece of fabric in half. Pierce the edge of one of the fabric flaps with a threaded needle and pull. Hold the fabric flaps together and bring the needle through both of them. Weave the needle up into the loop of thread at the top of the fabric, and pull tightly until the thread is flush with the fabric. Create your next stitch about ¹⁄₄ in (0.64 cm) away from the first, piercing the same side of fabric as the first stitch.^{[15]XResearch source}
- This stitch is commonly used to make napkins, stuffed animals, and blankets.

Expert Q&A

Search

Add New Question

Question
What is a basic sewing stitch I should know?
Andrea Beaulieu
Professional Tailor & Fashion Designer
Andrea Beaulieu is a Professional Tailor, Fashion Designer, and the Owner of MOORE, a Brooklyn, New York based storefront and apparel workshop for gender-neutral, contemporary streetwear as well as custom-tailored products. Andrea has over 20 years in the fashion design and marketing industries and specializes in pattern making, draping, and the construction of garments. She holds a BS in Fashion Design and Merchandising from the University of North Carolina at Greensboro.
Andrea Beaulieu
Professional Tailor & Fashion Designer
Expert Answer
Learn how to backstitch since you'll use it a lot to secure threads at the edge of a garment.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 12 Helpful 32
Question
Do I need to iron the fabric?
Community Answer
You don't have to, but it makes sewing easier. Ironing will smooth out the fabric and get rid of any wrinkles that may interfere with the pattern, cutting, pinning, and sewing.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 31 Helpful 134
Question
How do I stitch with a sewing machine?
Community Answer
Most sewing machines have settings for stitches. All you need to do is choose your setting, then move the fabric along where you want it to sew.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 49 Helpful 118

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

Always prewash a piece of fabric or clothing before sewing. This way, it won’t change size after you’ve finished sewing. Simply read the label on your fabric and follow the washing instructions.^{[16]XResearch source}
Thanks
Helpful0 Not Helpful0
If you’re right-handed, stitch from right to left. If you’re left-handed, stitch from left to right.^{[17]XResearch source}
Thanks
Helpful3 Not Helpful1
Cotton, linen, and flannel are great beginner fabrics to work with because they’re easy to hold, bend, and pierce a needle through.
Thanks
Helpful11 Not Helpful2