How to Ride a Ripstick

RipStiks are similar to skateboards, but they have 2 wheels instead of 4 and you twist your body to move them rather than pushing with your foot. Maneuvering the RipStik may seem hard at first, but with some practice and help from a friend, you can easily learn how to ride it. To get on the board, place your non-dominant foot on the nose, push off with your dominant foot, and put your dominant foot on the board. Always wear safety gear, ride on solid ground, and get ready to rip!

Part 1

Part 1 of 2:

Learning the Basics

Download Article

1
Put on a helmet, elbow pads, and knee pads to stay safe. Buckle the helmet onto your head and fasten the Velcro on your elbow and knee pads. When you ride a Ripstik, you can move at rather fast speeds and have the potential to fall and hurt yourself. To prevent hurting your head, arms, and legs, wear a helmet and protective padding.^{[1]XResearch source}
- It’s also helpful to have a pair of sneakers with rubber soles. They help you stabilize your feet on the board.
2
Have a friend help you balance if you need help getting on the board. It is much easier to balance if you have a friend who can support your weight as you stand on the board. Grasp their shoulder as you get balanced, then let go of them when your footing feels secure.^{[2]XResearch source}
- If you don’t have a friend, lean on a wall or railing to help you get on the board.
Advertisement
3
Put your RipStik on a smooth, flat surface. To get started, find a flat paved surface to practice on. This can be a sidewalk, driveway, or empty parking lot, for instance. Place the RipStik on the ground so it rests on its side. The board should face you and the wheels should point away from you.^{[3]XResearch source}
- Avoid riding through areas with cracks, speed bumps, water, and sand. Any of these may throw off your balance and cause you to fall.
4
Place your non-dominant foot on the nose of the board. The front of the board is slightly more narrow, and this is called the “nose.” If your right foot is your dominant foot, place your left foot at the nose of the board. When you ride a RipStik, the nose must be facing forward.^{[4]XResearch source}
- Riding with your left foot in front is referred to as riding "regular." Riding "goofy" is when you ride with your right foot on the nose of the board.
- The larger end called the tail of the board.
5
Push off with your dominant foot and place it on the tail. After one of your feet is centered on the nose, use your other foot to gain some momentum, and then square your foot on the center of the board. Move your foot in one quick motion so you can easily find your balance. At this point, both feet should be centered on each end of the board.^{[5]XResearch source}
- You’ll find that speed equals stability when riding a RipStik, so pushing with one of your feet will help you get balanced.
- If a friend is helping you, they can let go at this time.
- If you are struggling to maintain your balance, try pushing off with a bit more force and moving your foot to the board faster. You can also try bending your knees slightly to help you stay in position.
6
Reposition your footing if your feet are not centered. When you ride a RipStik, your feet must be in the middle of both the nose and tail sections. If they aren’t, simply stop the RipStik and try again.^{[6]XResearch source}
- If your feet aren’t centered, you won’t be able to control the board, make a turn, or gain speed correctly.
7
Maintain your balance as the board is moving. It’s much easier to stay on the RipStik once the board starts to move. Adjust your weight into a comfortable position and let the board glide forward. Keep your feet centered as you ride to move straight.^{[7]XResearch source}
- This may take some practice, but with time, this motion will feel more and more comfortable.
- If you are having trouble balancing, try bending your knees slightly or practice somewhere near a wall or railing so you can get stability.
8
Step off the RipStik when you want to stop. Getting off of the RipStik is simple. All you need to do is take your dominant foot off the board, followed by your non-dominant foot. If you are going slowly, you can do this rather effortlessly.^{[8]XResearch source}
- If you are concerned about your speed, move the foot on the nose of the board towards one side to come into a 90-degree turn, and then remove your foot. This slows the board down before you get off of it.

Part 2

Part 2 of 2:

Gaining Speed and Turning

Download Article

1
Twist your hips back and forth to move the RipStik faster. When riding a RipStik, you don’t have to push with your foot like you do when riding a skateboard. Simply wiggle the nose and the tail simultaneously by twisting your hips and shoulders back and forth. Move slowly to gradually increase speed, or twist your body quickly to go really fast.^{[9]XResearch source}
- When doing this, your body moves in a snake-like motion.
The direction of your turn depends on which foot you have in the front. For instance, if your left foot is on the nose of the board, adjust your weight towards the toe-side of your foot to move to the right. To turn toward the left, distribute your weight to the ankle-side of your foot.^{[10]XResearch source}
3
Move your feet in opposite directions to make a sharp turn. If you want to make a turn that’s greater than 90-degrees, adjust the foot on the tail of your board the opposite way you angled your front foot. For instance, if you lean toward the left to distribute your weight toe-side, twist your back foot towards the right.^{[11]XResearch source}
- This may take some practice, but by moving your back foot the opposite way of your front foot, you can easily manipulate the RipStik.
4
Practice this over time to perfect your turning technique. Riding a RipStik looks easier than it is, and it takes some practice to be able to get on the board, speed up, and turn with ease. If you can, practice for 30 minutes every day until you feel comfortable hopping on for a ride.^{[12]XResearch source}
- The more you practice, the easier riding a RipStik will be.

Video

Community Q&A

Search

Add New Question

Question
Is it easier to ride a skateboard or a RipStik?
How.com.vn Staff Editor
Staff Answer
This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
How.com.vn Staff Editor
Staff Answer
The unusual method of propulsion you need to ride a RipStik may take longer to master than the basic pushoff style that you use on a skateboard. Additionally, many people find it easier to balance on skateboards.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 8 Helpful 12
Question
How do you extend a RipStik?
How.com.vn Staff Editor
Staff Answer
This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
How.com.vn Staff Editor
Staff Answer
The RipStik isn’t really designed to be extended. You’d have to remove the torsion bar and replace it with a new, longer one.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 6 Helpful 9
Question
What’s the difference between a RipStik and a RipStik Mini?
How.com.vn Staff Editor
Staff Answer
This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
How.com.vn Staff Editor
Staff Answer
The Mini is smaller and easier to maneuver, making it ideal for kids and beginners.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 2 Helpful 8

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Things You’ll Need

RipStik
Helmet
Elbow pads
Kneepads
Hard surface

Tips

Replace your wheels when they start to get worn-in. This may take 1-3 months, depending on how often you ride. When your wheels are jagged and no longer smooth, they should be replaced.
Thanks
Helpful7 Not Helpful4

Tips from our Readers

The advice in this section is based on the lived experiences of How.com.vn readers like you. If you have a helpful tip you’d like to share on How.com.vn, please submit it in the field below.

Try to practice in a place that has walls, such as a garage. As soon as you lean to push off, wiggle your feet and you've mastered it!
Widen your stance for tricks. Don't be afraid to "wiggle" with a bit of force. People have done many crazier things on a RipStik
Don’t lean to much to one side of the RipStik while you are riding or you will crash and it will hurt.
Have a friend help by pushing you to gain speed (before you wiggle). Speed will help you stay stable.
Always be safe and have someone be a spotter. Your parents or an older sibling are a good choice.
If you put your foot to far forward, your RipStik will slide out from under you and you will crash.

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!

Warnings

Avoid riding on roads with traffic so you don’t have to worry about cars, bikers, or joggers. Stick to closed roads or empty parking lots.
Thanks
Helpful6 Not Helpful2
When you are first starting out, avoid riding your Ripstick on hills or steep areas. You can gain much more speed than anticipated, which can be hard to control.
Thanks
Helpful4 Not Helpful4