2 Easy Ways to Factory Reset a Linksys Router

Forget the admin password that you set for your Linksys router? Resetting it to factory settings is a good idea in that case! That process will wipe all the data and settings you've set up on the router and make it like new, including setting the admin password back to default. This How.com.vn article teaches you how to reset a Linksys router using the "Reset" button or the web-based setup page.

Method 1

Method 1 of 2:

Using the Reset Button

Download Article

You'll want to make sure anything that's connected to your router, like your computer, phone, tablet, and security cameras, is powered off and not actively using the network since it will disappear as the router resets.
It's a small inset button that's typically on the back of the router.
Advertisement
You will use this to press the reset button.
4
Press and hold the "Reset" button. The "Power" light should blink while you're holding the button.
- Newer models should reset after 10 seconds. On older models, however, you may need to hold the "Reset" button for 30 seconds.^{[1]XResearch source}
When the "Power" light is solid, the reset is complete.
You'll want to power cycle your router after you've reset it to apply the changes.
If the "Power" light is still flashing after one minute, try unplugging the router, wait for about 60 seconds, then plug it back in.
After your router is factory reset, you may need to reconnect to a wireless network if your computer isn't connected with a cable.
9
Open a Web browser to test for an Internet connection. If you still don't have an Internet connection, try restarting your computer.^{[2]XResearch source}
- After you've reset your router to factory settings, you'll need to set it up again.

Method 2

Method 2 of 2:

Using the Web-Based Setup Page

Download Article

Go to "http://192.168.1.1" in a web browser. This should connect you to the router. If not, the address should be located on your router along with a username and password.
If you haven't changed them from the factory defaults, leave the username blank and enter admin for the password.^{[3]XResearch source}That information is also on your router.
It's at the top of the window tab.
This will open a new tab.
It's a button in the center of the window.
6
Wait for the "Power" light to stop blinking. When the "Power" light is solid, the reset is complete.
- If the router light doesn't stop blinking, power cycle it. That means to unplug it from the wall, wait for 60 seconds, then plug it back in.
7
Go to a website in the browser to test for an Internet connection. Connection to the internet may take a few minutes, depending on your internet service provider.
- After you've reset your router to factory settings, you'll need to set it up again.

Community Q&A

Search

Add New Question

Question
Went from password secure to unsecure. How can i secure again?
How.com.vn Staff Editor
Staff Answer
This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
How.com.vn Staff Editor
Staff Answer
Log in to your router, go to Wireless > Wireless Security > Manual and select a security mode, like WPA2 Personal, then enter a password/passphrase and click Save Settings.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 1 Helpful 0
Question
How do I turn off lan?
How.com.vn Staff Editor
Staff Answer
This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
How.com.vn Staff Editor
Staff Answer
To disable a Land Area Network, turn off the broadcasting ability of your router. That way, no one can see your network when they are searching. Log in to your router, go to Wireless and click "Disabled" next to SSID Broadcast. Finally, click "Save Settings" to apply your changes.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 0 Helpful 0
Question
How do I reset my router using my mobile device?
How.com.vn Staff Editor
Staff Answer
This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
How.com.vn Staff Editor
Staff Answer
You can use the web-based setup page on your phone's browser.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 0 Helpful 0

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Resetting your router will erase your configuration. If you have previously opened ports for gaming, they will be blocked again. This will also wipe out any wireless settings or other adjustments, including the password if you've set a non-default one.
Thanks
Helpful0 Not Helpful0
The default settings for most routers is DHCP, NAT or some other form of automatic IP addressing. Take this into consideration if you've changed your router's settings to assign static IP addresses.
Thanks
Helpful0 Not Helpful0
If you've secured your router, all those settings have been reset, so you'll need to do that again if you plan on using the router after you've reset it.
Thanks
Helpful0 Not Helpful0

Show More Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!

Warnings

Resetting your router should be a last resort. Make sure you first try a power cycle or check your connection by opening a different browser.
Thanks
Helpful9 Not Helpful15