How to Change a TP Link Wireless Password

Download Article

Explore this Article

methods

1Using a Wireless ADSL Modem

2Using a Wireless G & N Routers

3Using a Wireless AC Router

Other Sections

Questions & Answers

Video

Tips and Warnings

Related Articles

Expert Interview

References

Article Summary

Download Article

This How.com.vn teaches you how to change a TP Link router's wireless network password. Some newer routers have dual band wireless connections which provide a wireless network at 2.4GHz and 5GHz. Sometimes you can set a separate password for both networks. A 2.4GHz network has a slower internet speed, but greater range. A 5GHz network has faster internet speeds, but shorter range. The web interface for each wireless router is different, so keep in mind that the menu options may differ slightly from what is listed here.

Things You Should Know

• You must be connected to the Internet in order to access the router's page.
• When using a dual-band router, you can set a separate password for each network.
• If you don't remember the admin username and password for your router, you'll need to reset it.

Steps

Method 1

Method 1 of 3:

Using a Wireless ADSL Modem

Download Article

1. 
   1
   Make sure your computer is connected to the Internet and open a web browser. You'll need to be connected to the Internet in order to access the router's page.

   • If your wireless connection isn't working properly, you can connect directly to the router.
2. 
   2
   Enter 192.168.1.1 into your browser's address bar. This is the TP Link router's default IP address. It is also the address for the router's web interface.

   • If the address above is incorrect, consult the user's manual to see what the default IP address is.
   Advertisement
3. 
   3
   Enter the router's username and password. If you haven't changed these from the factory settings, the username and password are both admin.

   • If you did change the username and/or password but no longer remember them, you'll have to reset your router before continuing.
4. 
   4
   Click Interface Setup. It's the second tab at the top of the page.
5. 
   5
   Click Wireless. It's below the main tabs at the top of the page.

   • If you are using a dual-band router, you can click Wireless 2.4 GHz or Wireless 5 GHz to set a separate password for each network.
6. 
   6
   Click Security (Broadcom Modem Only). It's below "Wireless" in the sidebar menu to the left.
7. 
   7
   Select "WPA-PSK/WPA2-PSK Mixed Mode" or "WPA2-PSK (best)". Use the drop-down menu next to "Authentication Type" or "Network authentication" to select "WPA-PSK/WPA2-PSK (Mixed Mode)" or "WPA2-PSK (best)", depending on which modem model you have.

   • Alternatively, you can select "WEP", but this method isn't as secure.
8. 
   8
   Enter your new wireless password. It goes in the field next to "Pre-shared key" in the box labeled "WPA-PSK/WPA2-PSK Mixed Mode".

   • If you are using WEP, enter your password next to "Key 1".
9. 
   9
   Click Save or Apply/Save. It's at the bottom of the page.
10. 
    10
    Click Advanced Setup or Management. For Trendchip modems, Advanced Setup is the third tab at the top of the page. On Broadcom modems, Management is in the sidebar menu to the left.
11. 
    11
    Click SysRestart or Reboot. On Trendchip modems, SysRestart is below the main tabs at the top of the page. On Broadcom modems, Reboot is below "Management" in the sidebar menu to the left.
12. 
    12
    Select the option to restart with current settings. It's in the center of the page. This reboots your modem and applies your settings.
Advertisement

Method 2

Method 2 of 3:

Using a Wireless G & N Routers

Download Article

1. 
   1
   Make sure your computer is connected to the Internet. You'll need to be connected to the Internet in order to access the router's page.

   • If your wireless connection isn't working properly, you can connect directly to the router.
2. 
   2
   Open a web browser. To access the router's page, you'll enter the TP Link router address in your browser's address bar.
3. 
   3
   Enter 192.168.1.1 into your browser's address bar. This is the TP Link router's default IP address. It is also the address for the router's web interface.

   • If the address above is incorrect, consult the user's manual to see what the default IP address is.
4. 
   4
   Enter the router's username and password. If you haven't changed these from the factory settings, the username and password are both admin.

   • If you did change the username and/or password but no longer remember them, you'll have to reset your router before continuing.
5. 
   5
   Click Wireless. It's on the left side of the page.
6. 
   6
   Click Wireless Settings or Wireless Security. This option is below the Wireless menu on the left side of the page.
7. 
   7
   Ensure "Enable Wireless Security" is checked

   

   . It's the first checkbox after the line-break about halfway down the page. If you don't see this option, move on to the next step.
8. 
   8
   Select WPA-PSK/WPA2-PSK. Use the drop-down next to "Security type" to select "WPA-PSK/WPA2-PSK".

   • Alternatively, you can select "WEP" in the Security Type drop-down menu, but this method is not as secure.
9. 
   9
   Type in a new password. This goes into the password field labeled "PSK Password."

   • If you are using WEP, enter your password next to "Key 1"
10. 
    10
    Click Save. This button is at the bottom of the page.
11. 
    11
    Click OK when prompted. This will save your new password, though you'll need to reboot your router for the changes to take place.
12. 
    12
    Click System Tools. It's at the bottom of the column of options that is on the left side of the page.
13. 
    13
    Click Reboot. You'll find this near the bottom of the System Tools menu.
14. 
    14
    Click OK when prompted. This will reboot your router. When it comes back online, your password will be in effect.

    • You will need to reconnect each of your previously connected devices to the router with the new password.
Advertisement

Method 3

Method 3 of 3:

Using a Wireless AC Router

Download Article

1. 
   1
   Make sure your computer is connected to the Internet. You'll need to be connected to the Internet in order to access the router's page.

   • If your wireless connection isn't working properly, you can connect directly to the router.
2. 
   2
   Open a web browser. To access the router's page, you'll enter the TP Link router address in your browser's address bar.
3. 
   3
   Enter 192.168.1.1 into your browser's address bar. This is the TP Link router's default IP address. It is also the address for the router's web interface.

   • If the address above is incorrect, consult the user's manual to see what the default IP address is.
4. 
   4
   Enter the router's username and password. If you haven't changed these from the factory settings, the username and password are both admin.

   • If you did change the username and/or password but no longer remember them, you'll have to reset your router before continuing.
5. 
   5
   Click the Basic tab. It's the center tab at the top of the page.
6. 
   6
   Click Wireless. It's in the sidebar menu to the left. This displays the Wireless settings.

   • If you are using a dual band router, you can click Wireless 2.4 GHz or Wireless 5 GHz to set a separate password for each network.
7. 
   7
   Enter your Wireless Network Name. Enter this in the field next to "Wireless Network Name (SSID). This is the name that will be displayed when wireless devices search for your wireless network .
8. 
   8
   Enter your new wireless password. This goes in the field next to "Password".
9. 
   9
   Click Save. It's the green button at the bottom of the page.
Advertisement

Community Q&A

Search

Add New Question

• Question

  How do I get the IP address if it is not written on my router?

  

  Community Answer

  Go to the search bar, select "run" and type in "cmd" and once the command box opens type "ipconfig/all."

  Thanks! We're glad this was helpful.
  Thank you for your feedback.
  If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn

  YesNo

  Not Helpful 10Helpful 22
• Question

  Can I disable a TP LINK 2 login password completely?

  

  Community Answer

  Yes, you can.

  Thanks! We're glad this was helpful.
  Thank you for your feedback.
  If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn

  YesNo

  Not Helpful 13Helpful 27
• Question

  How do I change my router password?

  

  Community Answer

  You have to log into your router via your computer: the IP address is typically 192.168.0.1, but it may be different for other routers. Once you have logged in, go to your router settings. If you don't know the password for your router, the default is Admin or Administrator.

  Thanks! We're glad this was helpful.
  Thank you for your feedback.
  If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn

  YesNo

  Not Helpful 14Helpful 44

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertisement

Video

Tips

• Avoid resetting your router unless you absolutely have to. If you do have to reset your router, create a new username and password immediately.
  Thanks

  Helpful2Not Helpful5

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!

Advertisement

Warnings

• Don't change router settings that you aren't familiar with.
  Thanks

  Helpful2Not Helpful3

Advertisement