Download ArticleDownload ArticleThis article was co-authored by Ryaan Tuttle. Ryaan Tuttle is a Home Improvement Specialist and the CEO of Best Handyman, Inc. in Boston, Massachusetts. With over 17 years of experience, he specializes in building home service businesses, focusing on creating scalable and efficient brands. With the help of his global team, the companies have achieved over 10+ million in sales and received recognition through magazine features, and enjoy partnerships with How.com.vn and Jobber field service software. Boston Magazine and LocalBest.com have named Best Handyman Boston the Best Handyman in Boston. Ryaan holds Construction Supervisor and Home Improvement Contractor Licenses.
This article has been viewed 194,182 times.
Wall anchors are useful for securing a heavy item, such as a shelf, in drywall. However, they have prongs that will damage the wall if you try to pull them out, and a collar that will damage the wall if you try to push them through. To safely remove a wall anchor, you need to remove the collar by either snapping or cutting it off. Try snapping it off the anchor is made of metal and cutting it off it isn’t.
Steps
Unscrew the threaded screw. Some anchors have threaded screws that need to be removed before you can reach the collar. In these cases, use a screwdriver to turn the screw counterclockwise until it is loose, and then remove it.[1]- If the screw has a cross slot on top, remove it with a Phillips-head screwdriver. This is the most common type of screw used in drywall anchors.
Grab the collar with a set of needle-nosed pliers. Use needle-nosed pliers to get underneath the anchor and grip it.[2] Grab the edge of the collar, then pull out and snap it off.[3]- The collar is a small circular piece of metal that holds the anchor in place, so that it cannot be pushed backward, out the other end of the wall.
- Be gentle when you attach the pliers. You don’t want to gouge the drywall. Try to avoid touching the drywall with the pliers.
- If the anchor is tight or stuck, place a flat-head screwdriver or pry bar under the head of the anchor to ease it out.
Advertisement
Press the tip of a screwdriver into the hole where the wall anchor is lodged. Once the anchor has been removed, you can use a screwdriver to push the anchor out through the other end of the wall. The screwdriver shouldn’t be larger than the diameter of the wall anchor because you will want to be able to push it through the wall without making the hole bigger. [4]- You can also use a 1⁄4 in (0.64 cm) drill bit to drill out the insert.[5]
Push the anchor through the wall with a screwdriver. The wall anchor should fall into the frame, behind the drywall. You will be left with a small hole to patch.- Another option is to place a Phillips-head screwdriver in the anchor. Tap it gently with a hammer. Once it is pushed slightly into the wall, apply joint compound over it to smooth out the hole.
Push a single utility razor blade under the collar. The blade should be sharp and flush with the wall, with the blade facing down. Do not push the blade toward the wall, or you could damage the surface of the drywall.[6]- This method works well on plastic anchors, not metal ones.
Saw the collar off the anchor. Rock the razor blade back and forth, to slowly cut through collar. Once the collar breaks off, discard it.[7]
Push the anchor through the wall with a screw driver. Once the collar has been removed, you should be able to push the anchor through the wall without damaging it. Press a screwdriver into the hole where the anchor is held. It should fall out on the other side of the wall.- Once the hole is clear you can proceed to patch it up, so no one will ever be able to know the anchor was there.
Apply drywall compound with a plastic putty knife. Apply drywall compound to a putty knife and wipe it back and forth over the hole. Stop when the hole is completely filled with putty.[8]- Using an “x” motion when you apply the putty will help get a smooth and even surface.
- If the hole is larger than 1⁄2 in (1.3 cm), cover it first with self-adhesive drywall mesh tape, which you can buy at a hardware store. Apply the compound over this tape.
Wipe off the excess drywall compound with the putty knife. Once the hole is completely full, smooth out the putty. Wipe off excess putty until it is flush with the wall.[9]
Allow the drywall putty to dry. Follow the direction on the package. Typically, you will need to let the putty to sit overnight.[10]
Sand the surface of the putty. Use medium-grade sandpaper to lightly sand the hole, removing excess putty. Stop when the surface is smooth. Wipe up the dust after you finish.[11]
Expert Q&A
- QuestionCan you take anchors out of the wall with pliers?
Ryaan TuttleRyaan Tuttle is a Home Improvement Specialist and the CEO of Best Handyman, Inc. in Boston, Massachusetts. With over 17 years of experience, he specializes in building home service businesses, focusing on creating scalable and efficient brands. With the help of his global team, the companies have achieved over 10+ million in sales and received recognition through magazine features, and enjoy partnerships with How.com.vn and Jobber field service software. Boston Magazine and LocalBest.com have named Best Handyman Boston the Best Handyman in Boston. Ryaan holds Construction Supervisor and Home Improvement Contractor Licenses.
Home Improvement SpecialistDefinitely! Simply grip the wall anchor with the pair of pliers and pull it out.
Video
Tips
- If you're relocating the anchor near the original anchor, don't pull it out. The new anchor may not hold up if it is close to a hole. Instead, push it in so that it is flush with the wall and plaster over it.Thanks
Things You'll Need
- Utility knife blade
- Needle nosed pliers
- Philips head screwdriver
- Sandpaper
- Patching compound
- Plastic putty knife
- Wall paint
References
- ↑ https://www.lowes.com/n/how-to/remove-unwanted-wall-anchors
- ↑ Ryaan Tuttle. Home Improvement Specialist. Expert Interview. 30 July 2021.
- ↑ https://www.familyhandyman.com/project/how-to-remove-a-hollow-wall-anchor/
- ↑ https://www.familyhandyman.com/project/how-to-remove-a-hollow-wall-anchor/
- ↑ Ryaan Tuttle. Home Improvement Specialist. Expert Interview. 30 July 2021.
- ↑ https://www.youtube.com/watch?v=wM7Vp6lQ2fs
- ↑ https://www.youtube.com/watch?v=wM7Vp6lQ2fs
- ↑ https://www.bobvila.com/articles/how-to-remove-drywall-anchors/#.WNvPFzsrI2w
- ↑ https://www.bobvila.com/articles/how-to-remove-drywall-anchors/#.WNvPFzsrI2w
About This Article
To remove a wall anchor, start by removing the threaded screws with a screwdriver. Then, grab the collar, which looks like a circular piece of metal, with a pair of needle-nosed pliers and pull it out. Alternatively, if your wall anchor has a plastic collar, push a utility knife under the collar and saw it off. Next, push the anchor through the hole in the wall with a screwdriver. For tips on how to repair the drywall after removing the anchor, keep reading!
Did this article help you?
⚠️ Disclaimer:
Content from Wiki How English language website. Text is available under the Creative Commons Attribution-Share Alike License; additional terms may apply.
Wiki How does not encourage the violation of any laws, and cannot be responsible for any violations of such laws, should you link to this domain, or use, reproduce, or republish the information contained herein.
- - A few of these subjects are frequently censored by educational, governmental, corporate, parental and other filtering schemes.
- - Some articles may contain names, images, artworks or descriptions of events that some cultures restrict access to
- - Please note: Wiki How does not give you opinion about the law, or advice about medical. If you need specific advice (for example, medical, legal, financial or risk management), please seek a professional who is licensed or knowledgeable in that area.
- - Readers should not judge the importance of topics based on their coverage on Wiki How, nor think a topic is important just because it is the subject of a Wiki article.
