Download ArticleDownload ArticleThis article was co-authored by Barry Zakar. Barry Zakar is a professional handyman and the founder of Little Red Truck Home Services based in the San Francisco Bay Area. With over ten years of experience, Barry specializes in a variety of carpentry projects. He is skilled at constructing decks, railings, fences, gates, and various pieces of furniture. Barry also holds his MBA from John F. Kennedy University.
There are 7 references cited in this article, which can be found at the bottom of the page.
This article has been viewed 1,691,100 times.
Stripped, or stuck, screws can quickly derail your projects! When removing a stuck screw, remain patient. When one method doesn’t work, don’t give up! Take a deep breath, gather a new set of tools, and try an alternative method.
If you're dealing with a stripped screw, you can read How to Remove a Stripped Screw; if it's a one-way screw, see How to Remove a One-Way Screw.
Unscrewing a Stripped or Stuck Screw
Use a shorter screwdriver with a larger head to apply downward pressure to the screw. Or, try rotating the screw with pair of pliers. If the screw still won’t budge, attempt to loosen its grip by applying a lubricant like WD-40.
Steps
Switch screwdrivers. When a screw is stripped, attempt to remove it with a different screwdriver.- First, try using a shorter screw driver with a larger head. Apply downward pressure and slowly attempt to remove the screw.
Tip: If this doesn’t work, try using a screwdriver with a different type of head. For instance, if the screw is a philips head, try a flathead screwdriver intead. When using a flathead screwdriver, it must be narrow enough to fit inside the entire hole. Apply downward pressure and try to extract the screw.[1]
Tap the screwdriver into the head with a hammer. Place your screwdriver into the head. Grab a hammer and tap the base of the screwdriver. This will lodge your screwdriver into the head, providing you with more grip. Set down the hammer and attempt to remove the screw.[2]- This method works best with soft-metal screws.
Advertisement- Remove the screw with a pair of pliers. If there is a slight gap between the surface and the head of the screw, try rotating the screw out with a pair of pliers, vise (American English) or vice (British English) grips. Secure the screw within the mouth of the locking pliers. Rotate the pliers and try to turn the stuck screw out.[3]
- Drill a small hole into the head with an electric drill.[4] Select the correct drill bit and power up your electric screwdriver. Carefully drill a small, shallow hole into the head. This will allow your screwdriver to sit deeper in the head of the screw. Retrieve your screwdriver and insert it into the head. Apply downward force as you attempt to remove the screw.[5]
- Use a Dremel. Attach a metal cutting disc to the Dremel, or small electronic rotator. Power up the tool and cut a new notch in the screw head. Grab a flathead screwdriver and put it in the newly cut slot. Rotate the screwdriver and try to remove the striped screw.[6]
- Drill a pilot hole in the head. Use an electric drill to create a ⅛ inch hole in the center of the head. Increase the size of the drill bit by 1/16 inch and make the hole larger. Continue to increase the size of the drill bit by 1/16 and enlarge the hole until it is the diameter of the screw extractor. Keep the drill in the center of the screw.[7]
- Note the recommended depth for you specific screw extractor. Don’t make the hole deeper than recommended.
- Turn and remove the screw. Keep the extractor straight while turning it counter-clockwise. Avoid applying any lateral pressure to the extractor as this can cause it to bend. Continue turning the screw until it loosens. Pull up on the extractor to bring the screw to the surface. Pull the screw from the surface with a pair of pliers.[10]
- Use a rubber band. To improve your screwdriver’s grip on the head, insert a wide rubber band between the screwdriver and the screw head. Place the rubber band flat against the head and insert your screwdriver. Slowly turn the screw driver and attempt to remove the screw.[11]
- Use steel wool. When you can’t find a rubber band, you can substitute steel wool. Place the steel wool on top of the head. Insert your screwdriver firmly into the hole. Rotate the screwdriver slowly and try to remove the screw.[12]
- Apply a lubricant. Spray the screw head with a rust penetrant. Allow the rust penetrant to sit for 15 minutes. Reapply the rust penetrant. Tap the stripped head 5 to 6 times with a hammer. Retrieve your screwdriver and attempt to remove the screw. [13]
- If you are unable to remove the stuck screw, apply a valve grinding compound. This product contains grit that will allow your screwdriver to grip the head. Insert your screwdriver into the head and try removing the screw.
Gather the supplies. Even if you are not a skilled welder, it is possible to adhere a nut to the stripped screw head. Purchase a super strong welding adhesive. Find a nut that is the same diameter as the screw head.- Adhere the nut to the head. Place the nut on the screw head, making sure it is centered. Carefully fill the nut with the super strong welding adhesive. Allow the product to dry the recommended amount of time.
- Remove the screw. Make sure the nut has completely adhered to the screw. Grab a socket wrench and place it on the nut. Rotate the socket wrench and remove the stripped screw from the surface.
Expert Q&A
- QuestionHow do you unscrew a broken screw?
Barry ZakarBarry Zakar is a professional handyman and the founder of Little Red Truck Home Services based in the San Francisco Bay Area. With over ten years of experience, Barry specializes in a variety of carpentry projects. He is skilled at constructing decks, railings, fences, gates, and various pieces of furniture. Barry also holds his MBA from John F. Kennedy University.
HandymanI suggest trying to drill it out. If that doesn't work, put in a new screw and patch the hole where the old screw was.
Video
Tips
- Try wrapping a rubber/elastic band around the screwdriver. This can improve your grip as you twist the screwdriver.Thanks
Tips from our Readers 
- Try using an electric screwdriver or battery-powered drill with a slip clutch. You'll be able to put more pressure on the electric tool then you would on a handheld one.
References
- ↑ https://removeandreplace.com/2014/04/27/10-easy-ways-to-remove-a-stripped-screw/
- ↑ https://www.youtube.com/watch?v=_mTFQbaT3Zc
- ↑ https://www.tradeskills4u.co.uk/posts/remove-a-stripped-screw
- ↑ Barry Zakar. Handyman. Expert Interview. 20 August 2020.
- ↑ https://removeandreplace.com/2014/04/27/10-easy-ways-to-remove-a-stripped-screw/
- ↑ https://www.tradeskills4u.co.uk/posts/remove-a-stripped-screw
- ↑ https://removeandreplace.com/2014/04/27/10-easy-ways-to-remove-a-stripped-screw/
- ↑ Barry Zakar. Handyman. Expert Interview. 20 August 2020.
- ↑ https://www.tradeskills4u.co.uk/posts/remove-a-stripped-screw
About This Article
To remove a stuck screw, place a rubber band or a piece of steel wool on top of the screw head before you try unscrewing it, which will give the screwdriver something to grip onto. You can also tap the screwdriver into the screw head so it has a better grip. If that doesn't help, try grabbing onto the screw head with a pair of pliers and then twisting the screw out. To learn other ways you can remove a stuck screw, like drilling a small hole in the screw head, scroll down!
Reader Success Stories
"I was dealing with a stubborn screw and read the list of options from How.com.vn on ways to not damage the screw. I chose placing a rubber band on the screw as I turned the screwdriver. It worked!"..." more
Did this article help you?
⚠️ Disclaimer:
Content from Wiki How English language website. Text is available under the Creative Commons Attribution-Share Alike License; additional terms may apply.
Wiki How does not encourage the violation of any laws, and cannot be responsible for any violations of such laws, should you link to this domain, or use, reproduce, or republish the information contained herein.
- - A few of these subjects are frequently censored by educational, governmental, corporate, parental and other filtering schemes.
- - Some articles may contain names, images, artworks or descriptions of events that some cultures restrict access to
- - Please note: Wiki How does not give you opinion about the law, or advice about medical. If you need specific advice (for example, medical, legal, financial or risk management), please seek a professional who is licensed or knowledgeable in that area.
- - Readers should not judge the importance of topics based on their coverage on Wiki How, nor think a topic is important just because it is the subject of a Wiki article.
