How to Remove Mop and Glo

Mop and Glo is a floor-cleaning product that is designed to add shine to a surface. Each time you use the liquid, it distributes a waxy film over the surface. Over time, it can cause the floor to lose its luster. In fact, it is not recommended for some floors because of the buildup. It is a good idea to wipe up the product from time to time, using cleaning products designed for your hardwood, linoleum or laminate flooring.

Method 1

Method 1 of 2:

Removing Mop and Glo From Hardwood

Download Article

Move as much furniture as you can. You will need to have access to all the areas that were covered in Mop and Glo.
Although this method is non-toxic, mixing a vinegar solution leads to a strong smell.
Advertisement
8l) of hot water. The water should be cool enough that you can submerge your hands in it. The vinegar is acidic and it brings up the waxy residue from the Mop and Glo.
These oils subdue the harsh vinegar smell.
Keep the amount of solution and water you use to a minimum to keep the subfloor from getting wet and the wood from warping. Start scrubbing from the farthest corner until you come to the doorway.
The vinegar needs a few minutes to break through the residue. Make sure to rinse well.

Method 2

Method 2 of 2:

Removing Mop and Glo From Laminate

Download Article

You don’t want anything to remain that could scuff the surface.^{[1]XResearch source}
Keep a bucket nearby to place damp rags and sponges.
You may need to get this at a specialty cleaning store.^{[2]XResearch source}
Since you shouldn’t use large amounts of water on laminate, you usually have to use harsh chemicals to remove film.
Apply liberally and clean with scrap rags.
You may be able to employ a non-stick scrubber sponge or #0000 steel wool to bring up tough film.
It takes plenty of hard work to get the Mop and Glo up. However, once you’ve removed it, you can use water and a microfiber cloth to clean your laminate flooring.

Community Q&A

Search

Add New Question

Question
How do I remove mop and glow from ceramic tiles?
Community Answer
There is a product called Norwex cloth that you can get for about $20 online. The Norwex cloth gets the surface clean and it does not have the shiny glow.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 11 Helpful 8
Question
How do I remove Mop and Glo from a brick floor?
Community Answer
Use ammonia half and half with water. Let set and repeat. Be careful of the fumes.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 6 Helpful 6
Question
How do I remove Mop and Glo from furniture where I sat the bottle down?
Community Answer
Use Goof Off pro strength remover. Try a small amount on a rag on a small area, and apply it using a circular motion.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 5 Helpful 4

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Wood floors that have many layers of Mop and Glo on them might require more serious methods. If the wax has hardened over decades, use a damp towel and an iron to loosen the film, and then scrape it up with a plastic scraper. This is only recommended when absolutely necessary, since steam can damage some hardwood floors.^{[3]XResearch source}
Thanks
Helpful1 Not Helpful0
The vinegar method also works well on linoleum. You can use more of the solution, since vinyl flooring can withstand water on its surface.
Thanks
Helpful2 Not Helpful0