How to Get Rid of Duct Tape Adhesive from Any Surface

Remove the hardest left-behind residues with household items

Duct tape is a powerful adhesive that can leave behind a strong, sticky residue. Fortunately, you can use plenty of common household tricks and commercial products on metal, plastic, glass, leather, and fabric surfaces. In this guide, we'll teach you how to remove duct tape's unsightly residue and keep your belongings clean.

Quick Tips to Lift Duct Tape Residue

Before trying chemical cleaners, manually remove as much residue as possible with a butter knife, rubber eraser, fresh duct tape, or a hair dryer.
For stubborn spots, combine cooking oil or water with baking soda. As an alternative, use commercial cleaners, rubbing alcohol, or sandblasting.
Use oily cleaning products on non-porous surfaces, and keep abrasive cleaners away from stone surfaces. For fabrics, opt for dye-free detergents or dish soap.

1

Rubbing alcohol

Download Article

Soak a microfiber cloth in rubbing alcohol to rub the adhesive off. Use a soft, clean cloth to avoid damaging the surface you're treating. Dampen the cloth with isopropyl rubbing alcohol and gently rub it back and forth over the affected area. Always test an indiscriminate area before proceeding.^{[1]XResearch source}
- Best for: Non-porous surfaces, like stone, leather, chrome, and carpet.
- Alternatively, use acetone or non-acetone nail polish remover. However, acetone may strip the paint off of metal surfaces.
- As a substitute for rubbing alcohol, use hard, clear liquor like vodka.^{[2]XResearch source}

2

Dish soap and warm water

Download Article

Scrub duct tape residue with dish soap and warm water. Place 1 US tbsp (3.0 tsp) of liquid dish detergent in 2 c (16 fl oz) of warm water. Stir until the mixture is bubbly. Then, dip a soft cloth into the soapy water to gently scrub the sticky residue. Keep rubbing the area until it no longer feels slippery or sticky.^{[3]XResearch source}
- Best for: Any surface.
- If you're removing residue from a light-colored fabric surface, opt for dye-free dish soap to avoid staining the fabric.

3

Laundry detergent

Download Article

Use a 1:1 ratio of detergent and washing soda. Combine equal parts of laundry detergent and washing soda into a bowl. Add small amounts of water, adding more as needed, to form a paste. Apply with a soft-bristle toothbrush or cloth. Let it soak for 10 minutes before using a damp cloth to remove it.^{[4]XResearch source}
- Best for: Stone, fabric, metal, vinyl, and more.
- Use warm water and a clean cloth to wipe the surface afterward.
- Washing soda is also known as soda ash or sodium carbonate. It is a natural cleaner and water softener that converts fats and grease into water-soluble salts.^{[5]XResearch source}
- Make washing soda at home by putting a tray of baking soda in the oven at 400°F (204°C) for 15 minutes.

4

Cooking oil

Download Article

Cover the residue with cooking oil and wipe the surface after 5 minutes. Use any cooking oil you have on hand—vegetable, canola, olive oil, it doesn't matter! Once it soaks in, rub or scrape the residue with a soft-bristle brush, dull knife, or a gloved finger. Wipe any excess oil off with an all-purpose cleaner.^{[6]XResearch source}
- Best for: Non-porous surfaces like glass, plastic, or metal.
- Applying oil to absorbent materials such as carpets or clothing may cause stains.

5

White vinegar

Download Article

Soak a paper towel in white vinegar and lay it over the adhesive. Dab a paper towel or cloth into distilled white vinegar. Lay the paper towel over the residue, then lift it after a few minutes. Rub or scrape the loosened residue.^{[7]XResearch source}
- Best for: Glass, tile, chrome, and fabric.
- Avoid using vinegar on stone, steel, and iron surfaces.

6

Baking soda

Download Article

Mix equal parts baking soda and oil to make a paste. If duct tape has left a stubborn mess on your surface, you may need something with a little more grit. Make a paste of equal parts baking soda and cooking oil or water. Let the paste sit for 5 or more minutes before wiping it away.^{[8]XResearch source}
- Best for: Fabric, metal, marble, silver, and plastic.
- Baking soda is ideal for kitchen surfaces since it's non-toxic.
- Avoid using baking soda on aluminum, gold-plated, marble, or antique silver pieces or surfaces since it's abrasive. It may scratch or oxidize certain surfaces.^{[9]XResearch source}

7

WD-40

Download Article

Spray WD-40 to treat metal surfaces. Spray the solution directly onto areas with a lot of residue or dampen a terry cloth to treat smaller patches of residue. Leave it on for a minute—longer if the residue is really stubborn—then scrub it off with soap and water to remove the oils.^{[10]XResearch source}
- WD-40 is perfect for car surfaces, too. Some users say it can help remove minor scratches on a car's paint job. Read the warnings on the canister to avoid using it on surfaces that may stain.^{[11]XResearch source}
- Best for: Metal and painted surfaces.
- As a substitute to WD-40, use Vaseline or car wax.

8

Lighter fluid

Download Article

Scrub sticky residue with lighter fluid for non-porous surfaces. Apply a small amount of lighter fluid to a paper towel. Lightly scrub the adhesive until it lifts. If there's a blurry residue left, take an alcohol wipe (or rubbing alcohol) to clean the surface.^{[12]XResearch source}
- Best for: Stainless steel, plastic, and most surfaces.
- Lighter fluid may affect some paint surfaces or certain plastics. Perform a test patch on beforehand.

9

Hair dryer

Download Article

Heat the residue with a hairdryer for quick removal. Set the hairdryer to the highest setting. Aim a few inches from the surface to avoid scorching or damaging it. Turn it on, and allow the hot hair to loosen the adhesive. Scrape it off carefully with a knife or a similar tool. You may need to repeat this step multiple times.^{[13]XResearch source}
- Best for: Most hard surfaces that can withstand heat.
- Use extra caution for plastic materials that may melt or glass surfaces that can crack due to high heat.

10

Dull blade

Download Article

Scrape the residue with a butter knife, dull putty knife, or razor. Lay the blade flat against the surface to avoid scratches. Then, slowly slide the blade over the residue and chip away at it. Work in small sections. If needed, wipe the spot clean afterward with soapy water.^{[14]XResearch source}
- Best for: Most surfaces.

11

Rubber eraser

Download Article

Lift the residue off most surfaces with a gum or rubber eraser. Take an eraser from your stationary supply and work in small sections to erase the residue. Brush the fibers away as you go. It may require a bit of elbow grease, but it'll work!^{[15]XResearch source}
- Best for: Plastic, glass, metal, and most other surfaces. However, it may be more difficult to use with fabrics.

12

Duct tape

Download Article

Use fresh duct tape to lift the old residue off. Have you ever tried to lift a dried Expo marker from a whiteboard using a fresh marker? Some users say the logic works the same when removing old sticky residue! Cut a fresh piece of duct tape. Place it over the residue and rip it off in the opposite direction to lift it.
- Best for: Most surfaces.

13

Commercial cleaners

Download Article

Apply a commercial residue remover for a stronger treatment. There are brands, like Goo-Gone, designed to remove residue from commercial tape. Follow the directions on the back label. Generally, this involves spraying the solution onto the surface, letting it sit, and wiping it away.^{[16]XResearch source}
- Best for: Most non-fabric surfaces.

14

Power washing or sandblasting

Download Article

Use high water pressure or sandblasting for exterior surfaces. You may need something strong if you have sticky residue on rock, concrete, or brick surfaces. Aim a high-pressure water system or sandblaster at the adhesive. Briefly turn it on and off until the residue is gone.^{[17]XResearch source}
- Best for: Rock, concrete, brick, and similar exterior surfaces.
- Be very careful when doing this. These machines can leave marks on most surfaces.

Community Q&A

Search

Add New Question

Question
What gets tape residue off of plastic?
Community Answer
Try using some rubbing alcohol first; avoid acetone or nail polish remover, as this may damage some types of plastics. If that doesn't work, try some dish soap or olive oil. After that, use a damp cloth and rubbing alcohol to wipe off any residue.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 5 Helpful 13
Question
How do you get duct tape residue off fabric?
Community Answer
Apply some hand sanitizer to the residue, then try to rub it off. Repeat this a few more times until most of the residue is gone. Next, spray some laundry stain remover, wait 5 to 10 minutes, then launder the fabric as usual.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 6 Helpful 7