How to Remove Caulk Residue

The ultimate list of solvents and tools that remove caulk

If you're trying to remove stubborn caulk residue, you're likely looking for a quick and easy fix to remove it. Thankfully, there are a ton of different ways to remove caulk residue that only take a few minutes to get the job done. In this article, we’ll explain which solvents and options are best for specific surfaces. Read on to say goodbye to old caulk residue for good!

Things You Should Know

Before using any solvents or soaps, try scraping the residue off gently with a putty knife or utility knife.
Commercial caulk removers are your best option if you have access to it.
White vinegar, baby oil, WD-40, and mineral spirits will all soften up silicone caulk to remove it.
Use acetone or nail polish remover for polyurethane caulk.

1

Goo Gone Caulk Remover

Download Article

Commercial caulk remover is the best for latex-based caulk. First, spray the product onto the residue. Let it sit for 2-5 minutes. Then, scrape off the residue with a putty knife. Use a stiff nylon brush to brush away the particularly pesky residue that won't come off with the putty knife. Once you've brushed and scraped away all the caulk, wipe down the surface with a soapy cloth.^{[1]XResearch source}
- Let the surface air dry when you’re done.
- Goo Gone is the most widely-recognized and respected caulk remover brand, but there are generic versions out there that should work as well. Anything that reads “caulk remover” will do the trick.

2

Utility knife

Download Article

You may not need chemicals at all if the residue is fresh. If you don't have any of the listed detergents or you want to avoid using harsh chemicals, just use the straight edge of a razor or utility knife. Simply cut out the old caulk and the remaining residue with the blade.^{[2]XTrustworthy SourceUnited States Environmental Protection AgencyIndependent U.S. government agency responsible for promoting safe environmental practicesGo to source} When you're done, use a gentle household cleaner and a rag to clean off any remaining caulk dust.^{[3]XExpert SourceEric Shipe
Home Improvement SpecialistExpert Interview. 11 June 2021.}
- Avoid using this method on softer surfaces, like wood, as the sharp utility knife may scratch the wood's surface.
- A plastic razor blade is also a good option, especially since it's less likely to scratch anything.^{[4]XExpert SourceEmily Fazio
  Home Improvement & DIY SpecialistExpert Interview. 27 July 2021.}

3

Putty knife or caulking spatula

Download Article

Try either of these options to remove caulk from wood manually. A putty knife or caulking spatula both have straight edges that can scrape up caulk without scratching or digging into the material. First, soften up the residue with a hairdryer on high heat for 30-40 seconds.^{[5]XResearch source} Then, gently scrape up the residue using either a caulking spatula or a putty knife.^{[6]XExpert SourceEric Shipe
Home Improvement SpecialistExpert Interview. 11 June 2021.}^{[7]XTrustworthy SourceUnited States Environmental Protection AgencyIndependent U.S. government agency responsible for promoting safe environmental practicesGo to source}
- Check as you work to make sure you're not leaving scratches on the surface. If you are, try heating the surface with the hair dryer for a little longer.

4

White vinegar

Download Article

This is the gentlest way to remove silicone caulk residue. Mix water and white vinegar in an empty spray bottle at a 1:2 ratio. Apply the substance to the caulk residue and let it sit for 5-10 minutes. Then, wipe up the substance from the surface along with the residue.^{[8]XResearch source}
- Since white vinegar is so gentle, it may take a few rounds before it removes all of the residue.

5

Isopropyl alcohol

Download Article

Remove silicone from painted surfaces or plastic with alcohol. Soak a cloth in isopropyl alcohol and let it sit over the caulk residue for up to 2 days.^{[9]XResearch source} Then, remove the cloth and scrape away the residue with a putty knife.^{[10]XTrustworthy SourceUnited States Environmental Protection AgencyIndependent U.S. government agency responsible for promoting safe environmental practicesGo to source} The alcohol should have softened it enough so that it's easy to remove.
- If rubbing alcohol is all that you have, you can use that instead. It just may take a few rounds before all of the caulk residue is gone.

6

WD-40

Download Article

WD-40 is a lubricant that can easily break down silicone caulk. First, clean the area with soap and water so that the WD-40 will be able to properly adhere to the residue. Let it dry and put on gloves. Then, use the straw on your can of WD-40 to thoroughly spray down the caulk residue. Let it soak for 2-5 minutes and then use a putty knife to scrape off the remaining residue.^{[11]XResearch source}
- If the residue is old or particularly thick, you may have to repeat this process a few times. Re-clean the surface with soap and water before each reapplication of WD-40.

7

Mineral spirits

Download Article

Use spirits for silicone caulk on concrete, marble, or porcelain. Put gloves on. Then, apply mineral spirits to a scrubbing pad and wipe down the caulk residue. If the residue is on plastic, use a rag soaked in mineral spirits instead. After you've wiped down the area, use a wet cloth to clean off the remaining residue and solvent.^{[12]XResearch source}
- Mineral spirits, also known as white spirits, are a common alternative for paint thinner. Do not use spirits on painted surfaces—you’ll strip the color.
- Wash your hands thoroughly when you’re done if you get any spirits on your skin. Mineral spirits can irritate your skin if you don’t rinse off.

8

Acetone

Download Article

This is best for polyurethane caulk on glass and unpainted wood. Dampen a cloth with water and wring the excess out. Apply pure acetone to the cloth and wipe down the caulk residue. This will soften the residue so that you can wear away the residue with the cloth. Avoid using this substance on painted wood, as it can strip the paint off of the wood.^{[13]XResearch source}
- Feel free to use a putty knife instead of a cloth if you can’t get the residue up.

9

Nail polish remover

Download Article

Nail polish remover is basically identical to acetone. It will get rid of polyurethane caulk just as well as acetone. Pour nail polish remover onto a damp rag and use it to clean off the caulk residue. The nail polish remover will be harsh enough to soften the caulk. Wipe the residue up and you’re good to go.^{[14]XResearch source}
- Nail polish remover can damage painted wood, so only use this substance on surfaces like glass, plastic, and unpainted wood.

10

Baby oil or body lotion

Download Article

Baby oil and body lotion are both great for removing latex safely from wood. Wood is sensitive to damage, so don’t break out the harsher solvents. Use a putty knife or a spatula to remove as much residue as you can. Then, use a blow dryer to heat up and soften the remaining residue. Finally, rub either baby oil or body lotion on the caulk for 5 minutes or until it has softened up. Remove the residue with your putty knife or your spatula and you’re done.^{[15]XResearch source}
- White vinegar is also gentle enough to use on wood. You may want to avoid getting the wood wet if you want to avoid swelling or water damage.

11

Hammer and chisel

Download Article

Hold a chisel to the edge of the residue, then hit the chisel with a hammer to remove it. Be careful to only try this method on surfaces that can handle it, like metal and steel. Don't use this method on porcelain, ceramic, and wood surfaces.^{[16]XTrustworthy SourceUnited States Environmental Protection AgencyIndependent U.S. government agency responsible for promoting safe environmental practicesGo to source} Clean off any remaining caulk dust using a cloth and a gentle household cleaner.

Expert Q&A

Search

Add New Question

Question
How can I remove caulk without using chemicals?
Eric Shipe
Home Improvement Specialist
Eric Shipe is a Kitchen and Bath Designer and the Owner of Bath + Kitchen based in Washington DC. Eric and his team specialize in cabinetry, design, and remodels. They serve homeowners, interior designers, architects, and contractors with a refined process, creative ideas, 4K photo-realistic renderings, and 360 Panoramic views. Bath + Kitchen was featured in Best of Houzz 2017-2020. Eric holds a BA in Economics and Business Administration from Ursinus College.
Eric Shipe
Home Improvement Specialist
Expert Answer
One of the best ways you can get rid of caulk is with a utility knife or a caulk removal tool.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 3 Helpful 1