Download ArticleDownload ArticleX
How.com.vn is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 14 people, some anonymous, worked to edit and improve it over time.
This article has been viewed 172,133 times.
Learn more...
If you're the owner of a boat, it's very likely that you've encountered the problem of barnacles adhering to the hull of your ship. While many mariners choose to leave the creatures where they are, barnacles can actually create considerable drag for your boat, slowing you down and costing you in fuel. Read the following article to learn how to remove barnacles safely and effectively from your boat.
Steps
Download Article
Remove your boat from the water. Barnacles can only be removed when the boat is still moored if you have the proper diving equipment.
Use a handheld, stainless steel scrubber to scrub gently until all barnacles are removed and all you see is the ship's hull.Advertisement
Remove larger barnacles with a plastic putty knife.[1]- Start with a plastic knife so there is less chance of gouging or scraping the hull of your boat. If it is ineffective against the barnacles, move up to a metal knife with dull edges.
Remove remaining barnacles with a stainless steel scrubber.
Purchase a pressure washer to remove large colonies of barnacles.[2] Allow your boat several weeks to dry, if possible, before pressure washing.
Spray parallel to the boat hull rather than directly at the barnacles. You want to get underneath the edge of each barnacle. Focus on small patches until you've pressure washed the entirety of the boat.[3]- This pressure washing process will likely remove some of the paint on your boat. You should be prepared, therefore, to repaint after a thorough pressure washing.
- This pressure washing process will likely remove some of the paint on your boat. You should be prepared, therefore, to repaint after a thorough pressure washing.
Apply a small amount of hydrochloric acid to any barnacle remnants after pressure washing. After applying, scrape off remaining barnacle plates with your plastic or dull-edged metal knife.
Apply a lime remover after applying the acid.
Wash the boat's hull thoroughly.[4]
Apply a product designed to make the hull of your boat slick. This will make cleaning barnacles off your boat that much easier in the future.
Finished.
Advertisement
Community Q&A
Search
- QuestionWill freshwater kill barnacles?
Community AnswerNo, it will not. - QuestionHow large can barnacles grow?
Community AnswerSome can grow as large as seven centimeters or more. - QuestionCan I use oxalic acid to clean barnacle spots on a fiberglass boat?
Community AnswerAccording my experience, oxalic acid works only for algae and microscopic organisms, not for barnacles.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
SubmitAdvertisement
Video
Tips
- Barnacles live and grow in salt water. Be aware you are at increased risk for barnacles if you travel or moor your boat in salt water.Thanks
- Get rid of barnacles as soon as possible. Barnacles are living organisms, and the longer they are allowed to grow on your boat's hull, the stronger the adhesion will be.Thanks
- To effectively prevent against barnacle buildup, paint your boat hull with an antifouling paint. Copper oxide is toxic to barnacles and will deter them from adhering to your boat. Repaint your boat when you notice the paint job starting to flake or you see the start of barnacles adhering to your boat.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Advertisement
Warnings
- Wear protective eyewear whenever you're pressure washing. Barnacles dislodged by the pressure washer can fly unpredictably and with great force.Thanks
- Wear heavy-duty rubber gloves when removing barnacles. The shells can be sharp and some of the chemicals used to get barnacles off can be caustic. You want to protect your hands from these potential dangers.Thanks
Advertisement
Things You'll Need
- Rubber gloves
- Protective eyewear
- Stainless steel scrubber
- Plastic putty knife
- Metal knife (with dulled edges)
- Pressure washer
- Hydrochloric acid
- Lime remover
- Copper-based paint
References
- ↑ https://www.boats.com/how-to/a-clean-boat-bottom-for-top-fuel-savings/
- ↑ https://oceanservice.noaa.gov/facts/barnacles.html
- ↑ https://www.youtube.com/watch?v=i-AUGi-CmSs
- ↑ https://www.youtube.com/watch?v=6_OYSHkFIWY
- http://www.howtocleanstuff.net/how-to-remove-hardened-barnacles-from-boats-and-stainless-propellers/
About This Article
Thanks to all authors for creating a page that has been read 172,133 times.
Reader Success Stories
"I learned how to easily remove barnacles from my boat."
Did this article help you?
⚠️ Disclaimer:
Content from Wiki How English language website. Text is available under the Creative Commons Attribution-Share Alike License; additional terms may apply.
Wiki How does not encourage the violation of any laws, and cannot be responsible for any violations of such laws, should you link to this domain, or use, reproduce, or republish the information contained herein.
- - A few of these subjects are frequently censored by educational, governmental, corporate, parental and other filtering schemes.
- - Some articles may contain names, images, artworks or descriptions of events that some cultures restrict access to
- - Please note: Wiki How does not give you opinion about the law, or advice about medical. If you need specific advice (for example, medical, legal, financial or risk management), please seek a professional who is licensed or knowledgeable in that area.
- - Readers should not judge the importance of topics based on their coverage on Wiki How, nor think a topic is important just because it is the subject of a Wiki article.
Advertisement
