How to Reattach Plastic Lettering to a Jersey

It’s game day! You’ve got your face paint on and your foam finger ready—but what about those peeling letters on your jersey? If your favorite jersey is looking a little worse for wear, don’t worry. In this article, we’ll tell you exactly how to reattach plastic lettering using either an iron or fabric glue to get you ready to support your favorite team.

Method 1

Method 1 of 2:

Using an Iron

Download Article

1
Lay the jersey on an ironing board. Spread your jersey flat on an ironing board with the plastic lettering facing upward. Smooth out the fabric as much as you can before you get started.^{[1]XResearch source}
- Smooth out the lettering as much as you can, too. If there are any corners peeling up, press them down flat onto the jersey material.
- The ironing method works well for plastic and vinyl lettering.
2
Set your iron to medium heat with the steam turned off. To reattach your letters, you only need heat, not steam. Let your iron sit for a couple of minutes to let it heat up.^{[2]XResearch source}
- Different irons have different heat settings, but most use numbers to indicate how hot they’ll get. If your iron uses numbers, set it to level 3.
Advertisement
3
Place a plain sheet of paper over the lettering. Paper will protect the lettering on your jersey from getting too hot. Grab a plain white sheet of paper and place it on top of the letters that you want to reattach.^{[3]XResearch source}
- Be sure to use plain white paper, not lined paper. Lined paper may leave ink residue on your jersey.
- If you don’t have paper, you can also use a thin cotton towel.
4
Iron the lettering to smooth down any edges. Grab your iron and place it gently on top of the lettering on your jersey. Run the iron quickly back and forth, without staying in one place for more than a few seconds. Go over all your lettering, and pay special attention to any areas that are peeling up.^{[4]XResearch source}
- Keep the iron flat on top of the paper to avoid any creasing.
5
Peel the paper up while the lettering is still hot. Once you’ve ironed over all your lettering, quickly grab the paper and remove it from your jersey (otherwise, it could stick to the lettering). Enjoy your jersey that looks brand new again!^{[5]XResearch source}

Method 2

Method 2 of 2:

Using Fabric Glue

Download Article

1
Spread the jersey out on a flat surface. If your jersey is dirty, wash it before you start. Spread the jersey out on a flat surface with the lettering facing upward, and smooth out any wrinkles or lumps.^{[6]XResearch source}
2
Dab a small dot of fabric glue under the edge of the letter. Gently grab the edge of the lettering and peel the corner upward. Grab your fabric glue and put a small dot directly onto the jersey where you want the lettering to lay flat.^{[7]XResearch source}
3
Press the letter down into place. Push the lettering down onto the glue that you put on your jersey. Hold it in place for a couple of seconds to adhere the lettering to the glue. If any glue squeezes out of the sides, wipe it up before it dries.^{[8]XResearch source}
4
Iron the lettering with a thick towel over it. Ironing your jersey will help the glue set and also keep the letters laying flat as they dry. Spread your jersey out on an ironing board, then put a thick towel over the lettering. Set your iron to the hottest setting and iron the letters for about 30 seconds.^{[9]XResearch source}
5
Let the fabric glue dry before wearing your jersey again. For the best results, keep your jersey laying flat for about 24 hours before you put it on again. That way, your glue will adhere to your jersey fabric, and your lettering will stay in place for much longer.^{[10]XResearch source}
- Need to wash your jersey? No problem! Fabric glue can be washed and dried without peeling off. Simply wash your jersey like you normally would once it’s dirty.

Community Q&A

Search

Add New Question

Question
How can I iron the letters of a hockey jersey?
Community Answer
Try putting a thin layer of cloth over top of the jersey, like a cotton t-shirt, and iron the letters over the cloth. Keep the iron on a lower setting.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 2 Helpful 4
Question
If I use notebook paper on my jersey, do I have to use two sheets or one?
T. Chinsen
Top Answerer
Test it first with 2 sheets to see if it will adhere the letter back on. Repeat with a single sheet. Adding a layer of foil under the fabric can provide an even heat level across the fabric surface.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 3 Helpful 0
Question
Would wax or parchment paper work better than white paper?
Community Answer
Parchment paper would not be thick enough, and the wax on wax paper would melt.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 0 Helpful 3

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

The heat from a dryer tends to damage the lettering on jerseys. From now on, try air-drying your jersey every time you wash it to keep it in pristine condition.
Thanks
Helpful1 Not Helpful0

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!