Download ArticleDownload ArticleThis article was co-authored by Lauren Kurtz and by How.com.vn staff writer, Savannah Vold. Lauren Kurtz is a Naturalist and Horticultural Specialist. Lauren has worked for Aurora, Colorado managing the Water-Wise Garden at Aurora Municipal Center for the Water Conservation Department. She earned a BA in Environmental and Sustainability Studies from Western Michigan University in 2014.
There are 10 references cited in this article, which can be found at the bottom of the page.
This article has been fact-checked, ensuring the accuracy of any cited facts and confirming the authority of its sources.
This article has been viewed 235,744 times.
Putting mulch around a tree makes lawns more attractive, controls weeds, and helps maintain soil moisture. However, if you apply mulch incorrectly, you can stimulate fungus growth, attract insects, and starve the tree's roots of oxygen. Luckily, expertly mulching around a tree is easy as can be if you follow our simple and effective steps. Read on for magnificent mulching!
Things You Should Know
- Shovel away old mulch, rocks, grass, and/or weeds from around your tree’s base to prepare your tree’s root flare for fresh mulch.
- Spread an even layer of medium-textured mulch in a 4–5 ft (1.2–1.5 m) diameter around the tree, leaving 1–2 inches (2.5–5.1 cm) of space between the tree and the mulch.
- Continue to spread an even layer of mulch around the tree until it’s 2–4 inches (5.1-10.2 cm) deep, adding stones around the mulch’s edge to create a barrier, if desired.
Steps
Select a medium-textured mulch. Fine textured mulch gets compacted and will starve your tree's roots of oxygen, while coarse mulch is too porous to maintain adequate water levels. A medium-textured mulch will hold water and won't starve the tree's roots of oxygen making it the perfect choice for use around your tree.[1]- Organic mulches include wood chips, bark, pine needles, leaves, and compost mixes.
- If you're unsure how much mulch you'll need, type "mulch calculator" into a search engine to find online tools to help you calculate the amount.
Spread mulch in a 4–5 ft (1.2–1.5 m) diameter around the tree. Apply a thin layer of mulch around the tree, not touching the tree itself. Leave 1–2 inches (2.5–5.1 cm) of space between the base of the tree and the mulch.[2]- Remove any existing mulch, if necessary, by shoveling or spading it away.
- Avoid creating a “mulch volcano” (pile of mulch around the tree’s base), as it will cut off your beautiful tree’s access to the oxygen it needs to thrive.
- Mulch stops serving a purpose after covering up to a 8 feet (2.4 m) diameter around the tree.
Advertisement
Continue laying down mulch until it's 2–4 inches (5.1–10.2 cm) deep. Keep layering the mulch around the tree until it's at the proper depth of 2–4 inches (5.1–10.2 cm) and is spread level around the tree.[3]
Create a mulch-bed barrier with stones or extra mulch if desired. Pile about 1 inch (2.5 cm) of extra mulch around the edges of your mulch bed to create a barrier that will prevent your freshly laid mulch from washing away when it rains. Placing rocks around the mulch bed is another effective and stylish way to create a barrier as well.[4]
Pull or kill weeds that grow out of the mulch. Mulch acts as a barrier for weeds and grass. Pull any weeds or grass that begin to grow out of the mulch bed throughout the year to prevent future growth and disruption of your tree’s root system.[5]- Apply herbicide, (chemical weed killer) around your tree to prevent grass and weeds from growing in your beautiful new mulch.
- If you use an herbicide, ensure it's safe around trees.
Rake the mulch to prevent it from getting packed down. Compacted mulch prevents oxygen from passing through, will starve your tree's roots, and often occurs due to excessive rainfall or people walking over it. Loosen compacted mulch by raking it.[6]
Replenish the mulch once a year. Mulching around the tree once a year will prevent weeds, provide essential nutrients, and help with the tree's drainage. Healthy, happy trees, here we come![7]
Shovel away old mulch, dirt, and rocks. Shovel away all the old mulch, debris, and rocks so that the tree trunk is visible. A "mulch volcano” occurs when mulch gets piled up year after year around the base of a tree. This is detrimental, as it starves the roots of necessary oxygen.[8]
Remove girdling roots with a girdling chisel and mallet. If you notice any roots growing upward around the tree as you clear away old mulch, remove 1-2 inches (2.5–5.1 cm) of the root where it contacts the tree trunk. Position your girdling chisel at the desired cut point and use your mallet to pound the shear into the root.[9]- Removing girdling roots will ensure that these roots do not reconnect and cause problems later down the line.
- Girdling roots (roots visible around the tree's base) indicate that the tree is starved for oxygen and will wrap around the tree's base and kill it over time.
Remove grass and other weeds around the tree with a spade. Scrape the area around the tree's base to remove weeds and/or grass. Once you shovel away the excess mulch, dirt, and rocks, you’ll see the primary root flare around the tree's base.[10]- Mulch will act as a natural weed barrier.
- Avoid using roll-out weed barriers, also known as landscaping fabric, as these will starve the tree of oxygen and compact the soil underneath them.[11]
Expert Q&A
Video
Tips
Things You'll Need
References
- ↑ https://mortonarb.org/plant-and-protect/tree-plant-care/plant-care-resources/mulching-trees-and-shrubs/#mulch-material
- ↑ https://mortonarb.org/plant-and-protect/tree-plant-care/plant-care-resources/mulching-trees-and-shrubs/#applying-mulch
- ↑ https://mgsb.ucanr.edu/?blogtag=irrigation&blogasset=88432
- ↑ https://www.todayshomeowner.com/how-to-keep-mulch-from-floating-out-of-flower-beds/
- ↑ https://extension.usu.edu/yardandgarden/research/managing-vegetation-around-fruit-trees
- ↑ https://youtu.be/P5HJQrDE9b8?t=141
- ↑ https://wec.ifas.ufl.edu/extension/gc/madera/landscaping/mulch.htm
- ↑ https://bygl.osu.edu/node/1494
- ↑ https://extension.umd.edu/resource/girdling-roots
About This Article
To mulch around a tree, start by shoveling away old mulch, dirt, grass, weeds, or rocks so you can see the tree trunk. Next, cut up-growing roots with pruners to allow the tree to get enough oxygen. Once the area is cleared, buy a medium-textured mulch, which will hold water and won’t starve the tree’s roots of oxygen. Then, spread a 2-4 inch layer of mulch in a 4-5 feet diameter around the tree, but make sure to leave a 1-2 inch space between the mulch and the base of the tree itself. For more tips from our Horticultural reviewer, including how to maintain a mulch bed, keep reading!
Reader Success Stories
"We have both mature trees and young trees and needed an update on caring for them properly. I was especially interested in whether or not we can safely prune the up-roots around some of the mature trees without damaging the tree. Glad to learn that we can!"..." more
Did this article help you?
⚠️ Disclaimer:
Content from Wiki How English language website. Text is available under the Creative Commons Attribution-Share Alike License; additional terms may apply.
Wiki How does not encourage the violation of any laws, and cannot be responsible for any violations of such laws, should you link to this domain, or use, reproduce, or republish the information contained herein.
- - A few of these subjects are frequently censored by educational, governmental, corporate, parental and other filtering schemes.
- - Some articles may contain names, images, artworks or descriptions of events that some cultures restrict access to
- - Please note: Wiki How does not give you opinion about the law, or advice about medical. If you need specific advice (for example, medical, legal, financial or risk management), please seek a professional who is licensed or knowledgeable in that area.
- - Readers should not judge the importance of topics based on their coverage on Wiki How, nor think a topic is important just because it is the subject of a Wiki article.
