How to Make an Automatic Piston Door in Minecraft

Download Article

Game Setup

|

Proper Wiring

|

Door Construction

|

Video

|

Q&A

|

Tips

|

Warnings

This How.com.vn teaches you how to make a door that opens when you step on a pressure plate in Minecraft's Creative mode. This is doable in computer, mobile, and console versions of Minecraft.

Part 1

Part 1 of 3:

Game Setup

Download Article

1
Start a game in Creative mode. While you can build an automatic piston door in Survival mode, finding the necessary resources and then crafting the components is incredibly time-consuming unless you already have the items.
2
Add the necessary components to your equip bar. You'll need the following items to create an automatic piston door:
- Redstone
- Redstone Torches
- Cobblestone (or a similar solid block such as wood)
- Sticky Pistons
- Stone Pressure Plates
Advertisement
3
Find a place to build your door. If you already have a dwelling to which you'd like to add the door, go to it. Otherwise, find somewhere flat. Once you find the place in which you want to build, you can move on to laying the wiring.

Part 2

Part 2 of 3:

Proper Wiring

Download Article

1
Dig a two-by-two-by-three hole. This means that the hole should be two blocks deep, two blocks long, and three blocks wide.
2
Dig two wire channels. When facing a three-block-wide side, dig a two-block-tall, two-block long corridor from the middle block, then remove the top block in front of you. Repeat this on the other wide side of the hole.
3
Place redstone on the bottom of the hole. This will create a two-by-three grid of redstone.
4
Place a redstone torch at the end of each channel. This torch will go on the raised block at the end of each corridor.
5
Line the corridors with redstone. You'll place two redstone on the floor of each corridor to connect the redstone torches to the redstone on the floor of the hole.
6
Place a cobblestone block over both redstone torches. You may first have to place a block to the side of the torch and then attach a second block to that block for this to work.
- You can also use wood or another solid block.
7
Cover up the hole and channels. You should be able to place blocks at ground level to cover the hole. Once you've covered up the hole and everything is even (with the exception of the blocks over the redstone torches), you can proceed to creating the door.

Part 3

Part 3 of 3:

Door Construction

Download Article

1
Equip the sticky pistons. Select the sticky pistons in the equip bar.
2
Place a sticky piston in front of each of the raised blocks. Face one of the blocks that's covering a redstone torch, place the sticky piston in front of it, and repeat for the other raised block.
3
Place a sticky piston on top of both sticky pistons. Face one of the sticky pistons, select the top of it, and repeat for the other piston.
4
Place redstone on each of the raised blocks. Doing so will activate the top sticky pistons.
5
Place your door's material on each sticky piston's front. All told, you should end up with four solid blocks (e.g., cobblestone) in the center of the sticky piston frame.
6
Place two pressure plates in front of and behind the door. This will leave you with a pressure plate on the ground directly in front of and behind each column of door material.
7
Test out your door. Step on both pressure plates at once to prompt the doors to open, then walk through your door. You should be able to get through without any trouble.
- You can build around your door to disguise the mechanism.

Community Q&A

Search

Add New Question

Question
Can I make a three block high door by adding one more piston above the two pistons?
Community Answer
Yes, but you'll have to connect it to the rest with more redstone. It might take up more room, but it should still work, as long as it's connected properly.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 44 Helpful 76
Question
When I put the redstone dust on top of the block above the redstone torch, it made a line instead of a blob. What happened?
Community Answer
It depends on the edition of Minecraft you have. A single piece of redstone dust will make a line in Minecraft: Bedrock Edition (mainly for Pocket Edition), but it will make a blob in Minecraft: Java Edition (mainly for PC users).
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 31 Helpful 53
Question
Why didn't my doors close again after I connected the 2 redstone torches?
The_Noble_Jedi
Community Answer
The redstone torches are creating an endless power source, causing the doors to stay open.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 71 Helpful 97

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

This is a great way to disguise a secret door. To disguise the pressure plate, if it is a weighted pressure plate (light and heavy weighted) you can place a gold or iron block underneath depending on the pressure plate. For a wood and stone plate, you can place a wood plank block or a stone block. You can cover the redstone mechanism with blocks and existing blocks with the face of a mountain, walls of your house or something else to hide it.
Thanks
Helpful4 Not Helpful0
When adding this mechanism to your existing house, you can add decorations (e.g., paintings) over the mechanism to avoid having to place extra blocks.
Thanks
Helpful3 Not Helpful0