Download ArticleDownload Article

This How.com.vn teaches you how to create a moving car in Minecraft. While you can't change the car's direction, you can create a vehicle that moves forward on its own. This is possible in all versions of Minecraft.

  1. How.com.vn English: Step 1 Start a new game in Minecraft's Creative mode.
    While you can technically build a car in Minecraft's Survival mode, doing so is very difficult due to the scarcity of most of the resources needed. Creative mode will allow you to create a car without running out of resources.
  2. How.com.vn English: Step 2 Open the Creative menu.
    To do so:
    • Computer - Press the E key.
    • Pocket Edition - Tap
    • Console Edition - Press the X (Xbox) or square (PlayStation) button.
    Advertisement
  3. How.com.vn English: Step 3 Place the car's building materials in your inventory.
    Move the following items from the creative inventory to your equip bar:
    • Slime blocks
    • Piston
    • Sticky piston
    • Redstone block
  4. How.com.vn English: Step 4 Find a flat space.
    The Minecraft car template will travel forward until it hits something, at which point it will no longer work. There must also be at least one block's worth of air below the car at all times, or it won't move.
  5. How.com.vn English: Step 5 Create two parallel, three-block long rows of slime.
    These rows must have exactly two blocks of space between them.
  6. How.com.vn English: Step 6 Connect the two rows.
    Place a total of two slime blocks between the rows of slime at the center blocks. You should now have a capital letter "i" shape, which will serve as the car's staging area.
  7. How.com.vn English: Step 7 Create the car's body.
    Add a layer of slime blocks on top of the staging area, then remove the eight slime blocks serving as the staging area. This will leave you with an I-frame suspended in midair.
  8. How.com.vn English: Step 8 Place a piston behind one end of the car.
    The piston must be facing the rear-center block. The easiest way to do this is by removing the rear-center slime block, facing away from the car, placing a couple of blocks on the ground to serve as scaffolding, placing the piston, and then removing the scaffolding and replacing the slime block that you removed.
    • The piston end of the car is the back of the car.
  9. How.com.vn English: Step 9 Place your sticky piston.
    Remove both middle blocks, face the front of the car, and place two sticky pistons. You may have to remove the slime block behind you and then replace it after the second sticky piston is placed.
  10. How.com.vn English: Step 10 Move to the front of the car.
    You'll need to replace the sticky piston closest to the front of the car with a regular piston facing the front of the car.
  11. How.com.vn English: Step 11 Replace the front sticky piston with a front-facing piston.
    This will leave you with the following design from front to back:
    • A parallel slime row
    • A front-facing piston
    • A rear-facing sticky piston
    • Another slime row
    • A front-facing regular piston
  12. How.com.vn English: Step 12 Place the first redstone block.
    This goes on the front-middle slime block.
  13. How.com.vn English: Step 13 Place the rear redstone blocks.
    One block goes on the rear-middle slime block, and the other goes right in front of it on top of the sticky piston.
  14. Step 14 "Sit" on your car.
    Find a non-redstone area on the car on which to sit.
  15. How.com.vn English: Step 15 Break the sticky piston's redstone block.
    The car will begin moving forward. You can stop it by placing another redstone block on top of the sticky piston, or by placing any block in front of the car.
  16. Advertisement

Community Q&A

Search
Add New Question
  • Question
    How do I put blocks on the top of the dispenser?
    How.com.vn English: Community Answer
    Community Answer
    You stand on the ground, place a dispenser, and hold shift and right-click the dispenser in the PC version.
  • Question
    What are the controls when riding the car using Xbox 360 or Wii U?
    How.com.vn English: Community Answer
    Community Answer
    Use the left joystick to move and the right joystick to look around.
  • Question
    Can this be done in Minecraft PE?
    How.com.vn English: Community Answer
    Community Answer
    Yes! Thanks to the new update in 0.15.0, it can! If you haven't updated, try this: Add a space that is a 9x9 flat square in the ground except one space in the middle. In the hole, place as many minecarts as you can. Make a pathway of 1 block near the 9x9 square, break a block, and enjoy.
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • You can decorate your car if you like, but make sure you don't place any blocks below the car or on top of the pistons.
      • Build it high up so it will travel a long way.
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • This car will get stuck if at any point there is a block occupying the space below the car. For optimal results, build this car on a superflat world.
      Advertisement

      About This Article

      How.com.vn English: Jack Lloyd
      Written by:
      How.com.vn Technology Writer
      This article was co-authored by How.com.vn staff writer, Jack Lloyd. Jack Lloyd is a Technology Writer and Editor for How.com.vn. He has over two years of experience writing and editing technology-related articles. He is technology enthusiast and an English teacher. This article has been viewed 506,347 times.
      229 votes - 47%
      Co-authors: 19
      Updated: June 17, 2023
      Views: 506,347
      Article SummaryX

      To make a car in Minecraft, open creative mode, and find a flat area. Make a capital “i” shape by placing 2 parallel rows of 3 blocks of slime, connected by 2 blocks. Add a layer of slime blocks on top, and then remove the lower blocks to suspend the base of the car. Then, place a rear-facing piston at the back of the car, and replace 2 center blocks with a sticky piston and a front-facing piston. Place a redstone block on the front-middle and rear-middle slime blocks, as well as on top of the sticky piston. Start the car by breaking the redstone on the sticky piston! For more tips, including how to stop your car once it's moving, read on!

      Did this summary help you?

      Thanks to all authors for creating a page that has been read 506,347 times.

      Did this article help you?

      ⚠️ Disclaimer:

      Content from Wiki How English language website. Text is available under the Creative Commons Attribution-Share Alike License; additional terms may apply.
      Wiki How does not encourage the violation of any laws, and cannot be responsible for any violations of such laws, should you link to this domain, or use, reproduce, or republish the information contained herein.

      Notices:
      • - A few of these subjects are frequently censored by educational, governmental, corporate, parental and other filtering schemes.
      • - Some articles may contain names, images, artworks or descriptions of events that some cultures restrict access to
      • - Please note: Wiki How does not give you opinion about the law, or advice about medical. If you need specific advice (for example, medical, legal, financial or risk management), please seek a professional who is licensed or knowledgeable in that area.
      • - Readers should not judge the importance of topics based on their coverage on Wiki How, nor think a topic is important just because it is the subject of a Wiki article.

      Advertisement