How to Make a Pop Up Card

Pop-up cards are a great twist on the ordinary greeting card. Make a few simple cuts into a piece of decorative paper to create a tab. Push the tab forward and apply your pop-up image. If you want to work with a card you've purchased, just add tabs to the pop-up image and place it in the center of the card. The recipient of your pop-up card will love your creation!

Method 1

Method 1 of 2:

Making a Pop-Up Card with Tabs

Download Article

Take 2 pieces of card stock or colorful paper that are the same size. Try using 8 x 11 in (20 x 28 cm) pieces of paper to make a standard sized card. You can use any heavy type of decorative or scrapbooking paper. If it's heavy enough, you could even use brightly colored construction.^{[1]XResearch source}
2
Fold 2 pieces of card stock or colorful paper in half. Fold both of the pieces in half widthwise for a standard-sized card. One piece will end up being the one with tabs and the pop-up image. This will fit inside the other piece which will be the front and back of the card.^{[2]XResearch source}
- You can use your fingers or a bone folder to completely smooth the fold.
Advertisement
3
Make 2 cuts in the center of the card that are 1-inch long. Take one of the folded pieces of paper and keep it folded in half. Make 2 parallel cuts that are 1-inch (2.5 cm) long through the folded side of the paper. The cuts should be in the center of the card so the pop-up image is centered. These tabs should work for images that are 2 to 3 inches (5 to 7.5 cm) in size.
- Take the size of your pop-up image into account. For example, if your pop up is large, you'll probably need a bigger tab.
Open the card that you just cut, so you can see the slits. Use your fingers to gently push the tab section up towards you. Run your fingers along the fold of the card so that it's firmly creased. Crease the tab section in the opposite direction so it pops out and away from the card.^{[3]XResearch source}
5
Cut out your pop-up image. Draw or cut out a pop-up image into any shape you like. You could even use small photographs. For example, use a gift shape, a cut-out of a person's name, a heart, or a small school photo. Cut out your pop-up shape and ensure that it will fit in your card.^{[4]XResearch source}
- Consider using an Exacto knife to make a precise cut around your image.
6
Attach the pop-up image to the tab. Open the card with the tab and apply a little glue to the bottom of the tab. Push the pop-up image to the tab and press it firmly so it sticks.^{[5]XResearch source}
- Avoid gluing the top of the tab or the image won't pop out properly.
7
Secure the second piece of paper to the card with the pop up. Get out the second piece of paper that you folded earlier. Rub a glue stick or lay double-sided tape across both sides of the paper when it's unfolded. Open the card with the pop-up image and set it into the adhesive. Press down firmly and let it dry completely.^{[6]XResearch source}
- The second piece of paper will hide the tab so you can't see that the card is a pop-up until you open it.
8
Decorate and sign the pop-up card. Write your message and use whatever craft supplies you'd like to embellish the card. If you have ribbon, glitter, stickers, stamps, or any scrapbooking materials around the house, use them! Place the card in the envelope and give it to the recipient.
- Consider using specialty trimming scissors to cut decorative borders along the sides of the card.

Method 2

Method 2 of 2:

Adding a Pop-Up Image to a Card without Tabs

Download Article

1
Get out a card or fold your decorative paper in half. If you'd like to add a pop-up image to a card that you've already made or purchased, set it on your work surface. If you want to make a simple card, take a piece of heavy, decorative paper and fold it in half.
- Most cards are folded widthwise, although you can fold it lengthwise to make a tall card.
- The card should be heavy enough to support the pop-up image.
2
Draw the pop-up image on a separate piece of decorative paper. Get out a piece of decorative paper or use a scrap of decorative paper large enough for your image. Use a pen or pencil to draw the image you'd like to pop up on the paper. You could also use printed images or photographs as long as you cut them to fit in the card.
- For example, take a photograph and cut the part of the picture you want into a decorative shape.
- Cut out shapes that match the theme of the card. For example, cut out or print flowers for a graduation card, use a cake image for a wedding, or use a picture of balloons for a birthday.
Depending on the size and shape of your image, draw a long thin rectangle on each of its sides. You'll fold back this rectangle to make a tab that attaches to the card. Each rectangle tab should be at least 1 to 2 centimeters wide, so you can fold them. If you prefer, you could fold the image itself instead of adding tabs.
4
Cut out the image with the tabs and fold it in half. Use a pair of scissors or an Exacto knife to cut out the pop-up image and the folding tabs.^{[7]XExpert SourceAmy Guerrero
Arts & Crafts SpecialistExpert Interview. 9 October 2020.} Ensure that you keep them in a single piece.
- If you accidentally cut the tabs out, you can still use them. You'll just need to glue the tabs the back of the image and glue them into the card.
- If you're making a detailed image, you can set it down on a cutting mat. Then use a utility knife to cut around the image.
Set a ruler down in the center of the image. Draw a line down the center to create 2 equal sides. Use your fingers or a bone folder to fold and smooth the image in half along the line.
6
Fold the tabs back to make a V-fold. Locate the tabs that you left on the sides of your image. Fold them back behind the image, so you can't see them anymore. If you accidentally cut them earlier, use glue or a glue stick to apply them to the back and sides of the image.
- If you prefer, you can even fold back the sides of the image itself. For example, if you're making a heart, folding back the sides will just make the heart appear longer.
7
Attach the tabs or V-folded image to the center of your card. Lay a strip of double-sided tape on the sides of the tabs that will touch the center of the card. Open your card and lay it flat. Place your pop-up image in the center and push down firmly on the tabs so the double-sided tape sticks in place. Close the card and open it to check that the image pops out.
- While you can use glue, it may leak out the sides. Tape is easier to handle and won't be visible.
8
Sign and decorate the card. If you're using a purchased card, just write your message and sign it. If you used your own decorative paper to make the card, you can also add embellishments and decorations. For example, brush adhesive over the card and sprinkle glitter or attach a ribbon. Place the card in an envelope and it's ready to send.
- Consider using specialty trimming scissors to cut decorative borders along the sides of the card.
- You can also use punches, stickers, beads, stamps, or colored markers to decorate the card.

Community Q&A

Search

Add New Question

Question
Can I make multiple pop-ups on the same paper?
Community Answer
Yes, you may make more than one pop-up.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 204 Helpful 321
Question
How can I make a good anniversary card?
Community Answer
Make the pop up a heart and around it, write how much you love your significant other or whatever you want the person to know.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 193 Helpful 274
Question
How can I make a beautiful pop up card?
Community Answer
Decorate your card with glitter pens, stamps, stickers, beads or other craft items.Use special trimming scissors to add interesting borders and designs around your card.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 201 Helpful 293

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!

Warnings

If a child is making the pop up card, supervise them when handling scissors.
Thanks
Helpful15 Not Helpful16

Things You'll Need

For Both Methods

8 x 11 in (20 x 28 cm) pieces of paper (construction paper, cardstock, or scrapbook paper)
Scissors
Glue/double-sided tape
Markers, crayons, colored pencils, writing utensils
Envelope
Card
Decorations (optional)
Ruler (optional)
Bone folder (optional)