How to Make a Piñata

Having a piñata at your party is a great way to provide decoration and entertainment all in one. There's no need to go out and buy a pinata for your next party, though. With these simple steps you can build your own, and you might find that making piñata can be just as fun as breaking them!

Part 1

Part 1 of 4:

Starting Your Piñata

Download Article

Making your pinata has the potential to get a little messy, so make sure you give yourself plenty of room to work. Cover your work area with layers of newspaper or a disposable plastic tablecloth. This will keep your tabletop clean, and make cleanup afterward a breeze. Keep yourself clean too by wearing an old shirt or apron as well as latex gloves.
Make the paper mache paste. In a bowl, mix 2 cups (473 g) of flour, 2 cups (473 ml) of water, and a tablespoon of salt. Stir the mixture until it starts to thicken like a batter. Don't worry about breaking down all the lumps; you want the batter to be relatively smooth but it will likely still have chunks of flour in it.^{[1]XResearch source}
Advertisement
Tear some newspaper into strips that are about 1 to 2 inches (2.5 to 5.1 cm) wide and 6 to 8 inch (15.2 to 20.3 cm) long. This will make the newspaper lay nice and flat on the balloon. You will need to prepare many of these strips of paper so that you have enough to cover your balloon in several layers.^{[2]XResearch source}
4
Choose a shape for your pinata. Make your pinata whatever you like! The easiest shape to make is an oblong sphere based on a balloon form, but you can create anything you want.^{[3]XResearch source}
- To create a more elaborate shape, tape or glue cardstock, and cardboard onto your balloon form.
- Traditional pinatas are made with a ceramic pot as the form, but these can be messy and dangerous. Stick with a pliable form made from paper products.

Part 2

Part 2 of 4:

Forming the Piñata Base

Download Article

Inflate your balloon. This will form the body of your pinata, so make sure you make it nice and big. Round balloons are preferable because they will create a larger space for all of the candy. You may also use a box if you prefer a square shape for your pinata. Add any additional shapes to make legs, arms, tails, snouts, hats, etc, using cardboard, newspaper or construction paper. Tape these shapes on with masking tape or clear tape.^{[4]XResearch source}
Dip the strips into your paste and remove any excess paste by running the strips through your pinched fingers or dragging them along the edge of the bowl.
Lay the strips down all over the balloon in a crisscross pattern until the entire balloon is covered. Leave the knot of the balloon uncovered to make removal of the balloon easier. Complete this step 3 to 4 times, allowing each layer to dry before adding another.^{[5]XResearch source}
Once you have finished adding layers of paper mache, let the pinata sit until it is completely dry and has hardened. How long this will be will depend on many factors, including how thick the paper mache is, and the humidity and temperature of the air. In general, plan on several days.

Part 3

Part 3 of 4:

Decorating the Pinata

Download Article

Paint the piñata. Use a single color to smooth out the paper and to create an even surface. It does not need to be especially well-painted, just enough to cover the paper. Choose a color that matches the decorations you'll be adding on or to match the animal or character that you're turning your piñata into, as it'll probably show through.
This will give your pinata a more traditional look. It is also a festive and inexpensive touch. Cut or tear strips of crepe paper and glue it onto the pinata. Leave the paper in strips, or bunch it up into small tassel-like balls and glue on.^{[6]XResearch source}
Once you've gotten the base of crepe paper on, add other neat details to your pinata. Colorful cupcake liners and brightly colored tissue squares can be added as fringe. If you made an animal, add googly eyes for a fun look.

Part 4

Part 4 of 4:

Filling the Piñata

Download Article

If the balloon has not yet popped, go ahead and pop it and remove it. Since you did not cover the knot of the balloon with your paper mache, you should have a small hole already.^{[7]XResearch source}
If the candy doesn't fit, cut away at the edge of the hole until it is large enough to pass the candy through.
Tie a string or ribbon to the holes to create a loop. This will come in handy later when it comes time to hang the pinata.
4
Put the goodies in the piñata. Start adding in candy, streamers, stickers, confetti, small toys or anything else you like.
- Avoid adding any candy that isn't wrapped.
- Toys that may break easily are also a poor choice.
Glue down some crepe paper on top of the hole, or use masking tape. The goal is to prevent the filling of the pinata from falling out before you've actually hit it.
Hang the pinata. Tie another piece of string, ribbon, or rope to the loop you've already made and use this to attach the pinata to whatever you'd like to hang it from.

Community Q&A

Search

Add New Question

Question
If I'm short on time, can I dry the pinata we are making with a hair dryer?
Community Answer
A hair dryer set on "cool" would work, but it might be easier to aim a few fans at it from different angles.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 78 Helpful 283
Question
Can I make a pinata with multiple layers?
Community Answer
Yes. You can stick on more paper mache layers or more layers for decoration.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 57 Helpful 138
Question
Why do you need salt?
Community Answer
It stops the papier mache from getting moldy.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 69 Helpful 303

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Read Video Transcript

Reader Videos

Tips

Use a thicker string if you are making a heavy piñata, this makes the piñata stronger.
Thanks
Helpful186 Not Helpful55
Use a punch balloon for a bigger pinata.
Thanks
Helpful175 Not Helpful55
Fill the piñata with individually wrapped pieces of candy. Bulk candy may be cheaper, but keep in mind that the contents of the piñata will spill all over the floor and kids will eat them no matter where they have fallen. Buy cellophane and individually wrap bulk sweets if you choose this option.
Thanks
Helpful128 Not Helpful41

Show More Tips

Tips from our Readers

The advice in this section is based on the lived experiences of How.com.vn readers like you. If you have a helpful tip you’d like to share on How.com.vn, please submit it in the field below.

I like to hang my piñata with string while it's drying so it doesn't stick to the table. It keeps its shape better.
Hang the piñata where the ground is smooth, not grass. It makes it easier to find all the spilled treats.
To customize, add details like the birthday child's favorite character. Get creative with the shape too!
If making one for young kids, use tissue paper instead of crepe. It breaks more easily when hit gently.
Avoid unwrapped candy or liquids that may leak. Chocolate can melt if hot. Sticky stuff makes a mess.
If older kids will be breaking it, reinforce with duct tape so it takes some effort.

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!