How to Make String & Beaded Friendship Bracelets

Download Article

A step-by-step guide for beginners

Download Article

Woven Bracelet

|

Beaded Bracelet

|

Video

|

Q&A

|

Tips

|

Things You'll Need

ARTICLE

VIDEO

Friendship bracelets are pretty, customizable, and super fun to make! You can put together the sparkliest beads or shiniest threads for yourself or a friend—the options are truly endless. In this article, we’ll teach you how to make woven and beaded friendship bracelets step-by-step. After this tutorial, you'll be a friendship bracelet-making pro!

Part 1

Part 1 of 2:

Woven Candy Stripe Friendship Bracelet

Download Article

1
Cut four 1 m (39 in) strands of embroidery floss, fold them in half, and tie a loop. For this tutorial, we’ll use 4 floss colors—pick whichever colors you like or follow our example using light blue, green, light pink, and purple. Trim the floss to be 1 m (39 in) in length, then fold them evenly in half to create 8 strands of floss. Tie an overhand knot at the top to form a loop. This will be one end of your bracelet.^{[1]XResearch source}
- Don’t have a measuring tape on hand to measure out your floss? No worries! Some bracelet-making pros recommend cutting each strand to be the length of your wingspan.
2
Tape the loop to a flat surface and spread out your strands. Once your strings are tied together, tape the loop or knot to a table, clipboard, or book. Then, spread out the strands so the colors follow a repeated pattern.^{[2]XResearch source}
- If you’re following our example, lay your strings in this order: light blue, green, light pink, purple, light blue, green, light pink, purple.
Advertisement
This is called a forward knot in friendship bracelet making and moves the left-most string to the right. Hold the second (green) string taught with your non-dominant hand, then use your dominant hand to place the first string (light blue) over it. Next, pull the end of the first string up and under the second string, creating a figure 4 shape. Pull the first string upward to create your first knot. Repeat this to create a second knot and complete the forward knot.^{[3]XResearch source}
4
Continue making forward knots on all of the strands. After knotting the second strand, move on to the third, making a figure 4 shape twice with the first strand over the third strand. Keep knotting until you’ve knotted the final strand (if you’re following our example, that would be the second light pink string) and the first strand is in the far right position.^{[4]XResearch source}
- Pull on the thread just until you feel resistance. Be careful not to pull too tight! If some knots are tighter than others, the bracelet will look lumpy and uneven instead of neat and sleek.
After making your first row of knots, the second strand will be in the first position (if you’re following our example, that’s the first green thread). Follow the same knotting technique as before, bringing the left-most thread over and under the strand next to it on the right until you’ve knotted all the strands (including the one you knotted with previously).^{[5]XResearch source}
6
Keep knotting until the bracelet is long enough for your wrist. This will be roughly 7 in (18 cm). Continue the knotting pattern, moving through each string. As you knot, you’ll notice a candy stripe pattern forming, with each row being a consecutive color. Once the bracelet is long enough to wrap around your wrist, finish the row you’re knotting, and tie all the strings together with another overhand knot.^{[6]XResearch source}
- Trim away any excess string after you’ve tied the bracelet onto your wrist.
- For extra pizzazz, braid the end of your bracelet so it’s easier to tie through the bracelet’s loop.^{[7]XResearch source}
- Customize your friendship bracelet even more by adding charms or beads to the ends. Simply thread the charms or beads to the leftover strands and tie a knot or braid to secure it in place.

Part 2

Part 2 of 2:

Beaded Friendship Bracelet

Download Article

1
Lay out your bead pattern. Before you start making your beaded friendship bracelet, it’s important to decide what you want to create. Take a look at your beads, and then play around with different patterns, colors, and sizes. What do you think will look best? Laying out the pattern beforehand can help you visualize your vision.^{[8]XResearch source}
- This can be extremely helpful if you want to use letter beads to spell something or put a special bead in the center of the bracelet.
- Try a colorful pattern, alternating between the colors of the rainbow and silver, shiny beads.
- Add your favorite lyrics or inspirational words to a bracelet. For example, words like “hope” and “gold rush” would be perfect for a fully gold beaded bracelet.
- Try using a bead board to lay out your beads to prevent them from rolling around.^{[9]XResearch source}
2
Cut a piece of elastic that’s around 8 in (20 cm) long. Stretchy cord or elastic is the best to use for beaded friendship bracelets. Stick with a clear cord or opt for a colored cord that matches your beads—the choice is up to you.^{[10]XResearch source}
- Alternatively, you can keep the cord on its spool while beading if you’re worried about beads falling off or the overall size of the bracelet.
- If you’re using a stretchy cord, stretch it out before you start beading. This can help prevent future snapping.
- Elastic cord comes in lots of sizes, with the highest numbers being the thickest cord. We suggest using 0.5mm or 0.8mm size cord for beaded friendship bracelets.
3
String the beads onto the cord. Now it’s time to make your friendship bracelet. All you have to do is take the beads you picked out and thread them onto your chosen string—it’s as simple as that! Continue beading until you’ve used up all your beads and/or the bracelet is around 7 in (18 cm) (or your wrist size).^{[11]XResearch source}
- Place a binder clip or stick a piece of tape at the end of the string to prevent the beds from spilling off the cord while you bead.
4
Tie the bracelet with a square knot. Working with stretch cord or elastic can be tricky, and a simple knot doesn’t always cut it. To keep your bracelet from falling apart, secure it with a square knot. Loop the right side of the elastic over the left side, pulling it underneath. Then, loop the left side over the right side and pull tightly.^{[12]XResearch source}
- Alternatively, some bracelet makers prefer using a surgeon’s knot to secure their bracelets. To do this, simply loop the right side over the left side twice and the left side over the right side once.
- For extra security, dab a bit of clear nail polish or craft glue on the knot.
Tuck a bit of spare elastic through the surrounding beads, then trim off the excess. Now, all that’s left to do is wear, trade, and show off your beautiful beaded creation!

Community Q&A

Search

Add New Question

Question
What is embroidery thread?
Community Answer
It's a 6-strand thread that has a looser twist, which allows for a higher sheen.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 55 Helpful 115
Question
What other materials can I use to make a bracelet?
Community Answer
You can use yarn, string, twine, ribbon, wool, etc. as long as you make sure whatever you choose is not too thick or heavy.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 92 Helpful 361
Question
Can I make this type of bracelet with yarn?
Community Answer
Yes. You can also make it with other types of thread too. Keep in mind that the finished bracelet will also be thicker.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 97 Helpful 308

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Read Video Transcript

Tips

If your woven bracelet starts to twist, iron it flat or use a paper clip to hold it straight.
Thanks
Helpful7 Not Helpful1
If you make a bunch of bracelets, consider selling them or trading them with friends.
Thanks
Helpful1 Not Helpful4
Working with smaller lengths of string to practice a new type of braid or woven design before creating a long one is always a good idea. Practice more to feel confident with the method.
Thanks
Helpful1 Not Helpful0

Show More Tips

Tips from our Readers

The advice in this section is based on the lived experiences of How.com.vn readers like you. If you have a helpful tip you’d like to share on How.com.vn, please submit it in the field below.

You can add charms by tying them into the knots on the top and bottom of the bracelet.
If weaving with embroidery floss is too hard, try using wool yarn.
Use a needle to untie incorrectly knotted areas.

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!