Download ArticleDownload ArticleThis article was co-authored by How.com.vn Staff. Our trained team of editors and researchers validate articles for accuracy and comprehensiveness. How.com.vn's Content Management Team carefully monitors the work from our editorial staff to ensure that each article is backed by trusted research and meets our high quality standards.
The How.com.vn Video Team also followed the article's instructions and verified that they work.
This article has been viewed 274,590 times.
Learn more...
While the usual style of leis is made from flowers or multi-colored ribbon, the concept of a lei can be transferred to other objects. The use of candy to make a lei is a fun way to reward younger children at parties, school graduations, special events and the like with a tasty treat that they can wear. You can make a simple, garland-like candy lei with cellophane, or you can make a fuller candy lei using individually-wrapped candies.
Steps
Roll out a piece of cellophane to 35 to 40 inches (88.9 to 101.6 centimeters) long. and 6 inches (15.24 centimeters) wide. You can also use plastic wrap instead, but you will have to be extra-careful so that it doesn't fold in on itself or wrinkle.- Clear cellophane would be best. If this is for a graduation ceremony, however, consider using one of the school colors instead.
Arrange your candy down the center of the cellophane.[1] Leave about 1 inch (2.54 centimeters) of space between each candy bar. You should also leave about 1 inch (2.54 centimeters) of space between the first/last candy pieces and the short ends of the cellophane.- Small candy bars, such as the kind sold during Halloween, work best for this.
- If you are using small candies, such as Hershey's Kisses or Starburst, you can pile them in groups of 3 to 4. If you are using larger candy bars, arrange them in groups of one.[2]
Advertisement- Fold the cellophane onto the candy, then start to roll the candy towards the other end of the cellophane.[3] Try to keep the 1-inch (2.54-centimeter) wide spaces between the candy. If you need to, use your finger to separate the candy after you have finished rolling it up in the cellophane.
- Cut 6 to 8-inch (15.24 to 20.32-centimeter) long pieces of curling ribbon.[4] You can also use satin ribbon or sheer ribbon instead. If this is for graduation, consider using the school's colors.
- Tie each ribbon around the space between the candy. You can do a simple double-knot, or you can tie the ribbon into a fancy bow.
- If you are using curling ribbon, consider curling the ends. You can do this by pulling the ribbon between your thumb and the pair of scissors.
- Over lap the two ends of the lei, then tie a ribbon between the two candies. Be sure to tie the ribbon into a tight, double knot. If you want, you can tie the ends off into a bow, or curl them instead.
- Finished.
Get some individually-wrapped candy. The candy that works best for this method are candies that are wrapped in cellophane, with the ends twisted shut. Great examples include Werthers, Jolly Ranchers, and saltwater taffy.
Cut lots of 6-inch (15.25-centimeter) long pieces of curling ribbon. You can use just one color or lots of colors. If this is for a graduation ceremony, you could even use the school's colors. You will need one piece of ribbon for each candy.[5]- Tie a piece of 6-inch (15.25-centimeter) long curling ribbon to one end of the candy. Place a piece of ribbon behind the wrapper, right between the candy and the twisted part. Make sure that the ribbon is centered, then pull the ends of the ribbon towards you and tie it into a tight, double-knot.
- Keep tying the ribbon to the candy until you are all out of candy. Don't worry if the ribbon pieces look too long. You can always cut them down later.
- Cut a 42-inch (106.68-centimeter) long piece of 2-inch (5.08-centimeter) wide ribbon. The color of the ribbon does not matter, because it will be covered by candy in the end. It might be a good idea to use a color that matches your candy, however, in case there are any gaps.[6]
- Start tying the candy to the 2-inch (5.08-centimeter) wide ribbon using tight, double-knots. Alternate the sides you tie the candy onto, and gently scrunch the candy together every so often. This will give you an extra-full lei.[7] Leave about 2 inches (5.08 centimeters) at each end of the ribbon so that you can tie it together. How full your lei turns out depends on how much candy you add.
- Consider tying a knot at the end of your 2-inch (5.08-centimeter) wide ribbon to keep the candy from sliding down while you work.
- Tie the ends of the wide ribbon together to form a loop. Be sure to use a tight, double-knot, and that there are no gaps between the knot and the candy.
- Consider trimming or curling the ends of the curling ribbon. You can leave the curling ribbon as they are, or you can trim them down. You can also curl them slightly by running them between your thumb and a pair of scissors.
- Finished.
Expert Q&A
Video
Tips
- It is common practice to hug the person you are giving the lei to.Thanks
- You can make smaller wreaths for children.Thanks
- If you do not wish to use candy, there are many other things you could try: money, small toys, and gift cards, just to name a few. Be sure the gift you select is appropriate for the age of the recipient.Thanks
Warnings
- If you choose to put candy in the lei, please be considerate of the recipient's possible food allergies.Thanks
- Be advised that food in the lei might not be eaten, and money might not be spent. These leis are usually given for important, sentimental events and might be saved as mementos.Thanks
- Do not allow small children to play with the cellophane wrapping.Thanks
- Be careful with the scissors.Thanks
Things You'll Need
Making a Simple Candy Lei
- Curling ribbon
- Cellophane
- Candy
- Scissors
Making a Full Candy Lei
- Curling ribbon
- 2-inch (5.08-centimeter) wide ribbon
- Cellophane
- Candy
- Scissors
References
- ↑ http://www.thecraftpatchblog.com/2013/01/candy-bar-lei-tutorial.html
- ↑ https://www.ohnuts.com/blog/how-to-make-candy-leis/
- ↑ http://www.thecraftpatchblog.com/2013/01/candy-bar-lei-tutorial.html
- ↑ https://www.ohnuts.com/blog/how-to-make-candy-leis/
- ↑ http://www.thaoie.com/2011/06/01/candy-leis-a-nice-graduation-gift/
- ↑ http://www.thaoie.com/2011/06/01/candy-leis-a-nice-graduation-gift/
- ↑ http://www.thaoie.com/2011/06/01/candy-leis-a-nice-graduation-gift/
About This Article
To make a simple candy lei, start by rolling out clear cellophane that’s 35 to 40 inches long and 6 inches wide. Next, place small candy pieces down the center, leaving 1 inch of space between each. Then, fold the cellophane onto the candy and roll the candy towards the other end. When you reach the other end, use 6 to 8 inch ribbon strips to tie double knots around the spaces between each candy. Finish by tying a ribbon between the 2 ends of the lei. For more tips, including how to make a lei with larger candy, keep reading!
Reader Success Stories
"I'm making this for my cousin's graduation. I think he'll like it."
Did this article help you?
⚠️ Disclaimer:
Content from Wiki How English language website. Text is available under the Creative Commons Attribution-Share Alike License; additional terms may apply.
Wiki How does not encourage the violation of any laws, and cannot be responsible for any violations of such laws, should you link to this domain, or use, reproduce, or republish the information contained herein.
- - A few of these subjects are frequently censored by educational, governmental, corporate, parental and other filtering schemes.
- - Some articles may contain names, images, artworks or descriptions of events that some cultures restrict access to
- - Please note: Wiki How does not give you opinion about the law, or advice about medical. If you need specific advice (for example, medical, legal, financial or risk management), please seek a professional who is licensed or knowledgeable in that area.
- - Readers should not judge the importance of topics based on their coverage on Wiki How, nor think a topic is important just because it is the subject of a Wiki article.
