How to Keep Car Doors from Freezing Shut

In cold weather, car doors can freeze shut, and typically at the most inconvenient time. You can end up with a door that refuses to open, a lock that refuses to budge, or both at the same time. But this is not an impossible task. With some preparation, a little know-how, and ingenuity, you will be in your vehicle soon.

Method 1

Method 1 of 2:

Keeping Doors from Freezing Shut

Download Article

1
Avoid weather effects. The typical cause of car doors and car locks freezing shut is ice. When icing conditions are predicted — rain near the freezing point, freezing rain, freezing fog, or rain and snow — get your vehicle under cover. Another possible cause is frigid weather, which may cause locks and car doors to freeze without a lot of moisture causing the problem. Of course, not everyone has access to a covered parking space, heated garage, or the like.
- Avoid locking your doors. If possible, keep doors unlocked. This will avoid the locking mechanism from locking into place. However, leaving the doors unlocked may allow the car to be entered by a thief. Do not leave any valuables in the vehicle if you plan on leaving it unlocked.
- Place duct tape over your door lock to keep it from freezing.
- If your car is parked outside, a car cover or tarp minimizes the amount of moisture from snow and rain that can reach the door parts and freeze.This is especially useful during an ice storm or other icing event.
The rubber gasket, or seal, along the edge of the car door is the area that freezes, not the metal itself. Inspect the seal on each car door and around each window. Visit an auto parts store to purchase replacements if you notice tears or gaps where water could seep in.
Advertisement
Clean the entire door frame to remove road debris and other detritus that can build up over time. Water can collect around the dirt and freeze the door shut once the temperatures drop.
4
Coat the rubber with a protective liquid. Rub oil or lubricant over the rubber seals with a paper towel. This will repel water, reducing the amount that enters the seal and freezes. There is some disagreement over which oil is best to use, but here are a few options:
- A rubber conditioner or rubber care product are probably the safest options for long-term care.
- Silicone spray lubricant can last several weeks per application, but it can damage foam rubber seals and should be kept away from paint.^{[1]XResearch source}^{[2]XResearch source}
- WD40, another light lubricating oil, or even nonstick cooking spray are easily available options, but repeated use can dry out or disintegrate the rubber.^{[3]XResearch source}

Method 2

Method 2 of 2:

Preventing and Dealing with Frozen Locks

Download Article

1
Rub the key and lock with rubbing alcohol. Choose a rubbing alcohol that contains at least 60% alcohol, so the alcohol will adhere to the lock and prevent moisture from freezing over it. Rub it onto the key and the door lock with a paper towel once per week to prevent ice from forming. This can also work to melt existing ice, but is typically slower than the methods below.
- Petroleum jelly is another option, but may leave a messy residue on your equipment.
2
Spray a lock lubricant for severe problems. If rubbing alcohol is not enough to keep your lock usable, select a lock lubricant. Even experts tend to have differing opinions about lubricant choices, but some options are recommended more often than others. Use only one of the following options per lock, since a mix could easily gum it up:^{[4]XResearch source}^{[5]XResearch source}
- A graphite lubricant typically comes in a squeeze bottle of air that can be pressed directly into the keyhole. Some people find this can absorb moisture over time and leave gunk on the key.
- Teflon-based lubricant is often recommended, but some people consider the products that contain silicone messy and ineffective.
- Greaseless lubricants are supposed to attract less dust and debris.
Keep a de-icer product in your garage or winter jacket, in case you are frozen out of your car. These are typically sprayed directly onto the lock, and are the most effective option in severe ice conditions. Choose the lock with the least amount of ice buildup, spray, and insert the key.
4
Heat the key. Hold the key with an oven mitt or tongs, with the toothed tip over a lighter or match, then insert it in the lock. If the key is completely metal, with no plastic handle or computerized fob, you can safely heat the key while it is inserted in the lock.
- This is not common a practice in cold climates; and there are other, safer alternatives for you and your vehicle. This should only be attempted if no other alternatives are available.
- Do not do this with a key with a computerized chip. This may easily damage the electronics, and replacements can costs hundreds of dollars.
5
Warm the lock with a hairdryer or your own breath. This method is less effective, but worth a try if no other options are available. A cardboard tube (such as an empty toilet paper tube) placed over the frozen lock will help direct the warm air. Keep trying for several minutes, especially if you do not have a tube or if conditions are windy.
- If your car is outside, use a battery-operated hair dryer, or an extension cord rated for outdoor use.

Community Q&A

Search

Add New Question

Question
What is the name of a product used to avoid car doors from freezing shut?
Community Answer
Use any product containing silicone. It usually comes in a spray can. Apply around the door frame and lock.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 24 Helpful 38
Question
Will applying Vaseline around car door seal help keep the door from freezing shut?
Community Answer
I've used it, and it has done the job, however it's likely to mess up your clothes as you brush against it getting in and out of your car, so wipe it down with a paper towel after applying so there's only the lightest coat on there.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 10 Helpful 28
Question
Can I use Crisco on the rubber seal around the doors?
Edtha Price
Community Answer
Yes, you can use Crisco oil. Apply to gaskets but wipe with paper towel to remove excess oil.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 5 Helpful 10

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

While this won't stop car doors from freezing, a remote keyless car starter will heat the interior of the car and melt any ice that has formed in the doors.
Thanks
Helpful4 Not Helpful1
Check the hatch as well as all the doors. Once you can get in and start the engine, the other doors will warm up and the ice will melt.
Thanks
Helpful0 Not Helpful1
If your car has keyless entry, it won't matter if the door lock freezes.
Thanks
Helpful0 Not Helpful3

Show More Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!

Warnings

Avoid getting oil or lubricant on your clothing when you get in and out of the car. Use an ordinary laundry cycle with detergent to remove it.
Thanks
Helpful14 Not Helpful23