How to Install or Replace Door Hinges

Door hinges play an important role in our everyday lives; they provide all of your doors with support. Hinges on exterior doors provide the first line of safety for the family inside, and offer protection from the elements. Inside the home, they offer privacy to family members. Installing door hinges, whether new or replacement ones, is an easy skill to master and can be invaluable for many homeowners, especially ones who enjoy D.I.Y. projects.

Things You Should Know

Trace the outline of new hinges on the door and jamb (if you’re replacing hinges, use the old outlines). Use a hammer and chisel to cut the mortise.
Put the hinge into the mortise and mark the location of the pilot holes. Remove the hinge and drill holes over your markings.
Screw the hinges into place and connect the door to the jamb, making sure the knuckles of the door-hinge and jamb-hinge are interconnected.

Method 1

Method 1 of 2:

Installing Door Hinges

Download Article

1
Place your hinges in the correct location. Assuming you're installing a new door, you'll need to find the precise location on the door frame for your hinges. Most doors require a minimum of two hinges: one hinge is located 7-inches from the top of the door frame, and the other hinge is located 11-inches from the bottom of the door frame. Measure this distance and mark the location on the frame, and then do the same on the door that you're hanging.
- If you have a third hinge (typically used for heavy doors), it will be placed directly in the middle of the other two hinges (this will put it slightly off-center).
Put your hinge in place on the door and the jamb, and use a carpenters pencil to carefully trace around the hinge. The depth of the hinge on the jam should always be as thick as the hinge is. Double check to make sure that your outlines match the same location on the door and jamb, before moving to the next step. Then, use a utility knife to score the outline; this will make it easier to cut the mortise.
Advertisement
3
Cut the mortise. The term 'cut the mortise' is the professional term for cutting out the wood in the jamb in the shape of the hinge, so that the hinge will be inset in the jamb and provide more strength and aesthetic appeal. To cut the mortise, you'll need a very sharp chisel and a hammer. While carefully angling the chisel, tap gently into the jamb from the side to remove thin strips of wood. Make sure not to cut the mortise too deep, as this will cause the hinge to become loose over time. Cut out only the outlined area and the marked depth.^{[1]XResearch source}
- Using a dull chisel will make it more difficult to cut the mortise, and cause you to use more pressure with the hammer (which could cause a slip).
- If you cut the mortise too deep, you can use wood filler or place a thin piece of wood in it before installing the hinge.
Replace the hinge back in the jamb where you cut the mortise. Use your pencil to mark the location of the screws in the jamb. Do the same with the location of the hinge on the door. Remove the hinges when you're done marking.
Use a drill or screwdriver to drill very narrow pilot holes in the location of the screws you marked on the jamb. Tap them lightly in first, to make sure the screws don't accidentally move out of place. Use a screw guide to keep the screws straight as they go into the wood.
Put the hinges back in their places, and use a drill or screwdriver to secure them individually into the jamb and the door.
Hold the door in place, using blocks under the bottom to support it if necessary. Line up the two hinge plates so that the ones on the door match the ones in the jamb. Slide the hinge pins into place, and remove the blocks from the door. Test the door to make sure it works, and you're finished!

Method 2

Method 2 of 2:

Replacing Door Hinges

Download Article

Move the door so that the entire hinge is exposed, and place blocks under the door to steady it. When replacing a door hinge, you won't remove the door. Placing blocks underneath will help support the door and prevent it from falling over.
Make sure that your new hinges match the old hinges in size and edge shape. Additionally, use a measuring tape to verify that the current hinges are in the right locations. The hinges should be placed so that one is 7-inches from the top of the door frame, and the other is located 11-inches from the bottom of the door-frame. If these are incorrect, you'll need to go about the aforementioned steps on cutting the mortise and preparing the door jamb for the new hinge.
Start at the top hinge, and remove the screws holding the hinge leafs in place. Carefully pull them away from the door and the jamb, and check to make sure the wood under the hinges is in good condition. You may want to plug some of the old holes with a small wood wedge, especially if some of the holes have stripped out.
4
Prepare the jamb and door for the new hinge. If the old door hinge had been attached for some time, you may need to do a little repair work on the jamb and door. Sand down the wood if necessary, and add a new coat of paint or stain to match the pre-existing wood.
- If the replacement hinges are sized differently from the old ones, fill in the mortise holes in both the door and the door frame with wood putty. Use a metal scraper to fill in the screw holes or plug them with a small wood wedge.
- Allow the putty time to dry, and sand it smooth and flush with the surface.
- Paint or stain the repair to match the rest of the door and trim.
Place your new hinge over the location of the old one. Use a drill or screwdriver and the package screws to secure the two sides of the hinge to the jamb and the door. Place the hinge pin in the hinge to secure the new hinge.
6
Repeat the process on the second hinge. Move to the next hinge, and use a drill or screwdriver to remove it. Replace it with the new hinge and new screws, holding it in place to make sure the hinge doesn't get jostled out of location. Insert the new hinge pin when the new hinges are secured.
- If you have a third center hinge, you should replace it at this point as well.
Remove the blocks from under the door, and try opening and closing it multiple times. If the door opens without any problems, then your job is finished!

Expert Q&A

Search

Add New Question

Question
What if you need to move the upper hinge either up or down from the 7" mark?
Mark Spelman
Construction Professional
Mark Spelman is a General Contractor based in Austin, Texas. With over 30 years of construction experience, Mark specializes in constructing interiors, project management, and project estimation. He has been a construction professional since 1987.
Mark Spelman
Construction Professional
Expert Answer
If you need to move the hinge, mortise more material as needed and then add wood filler or caulking to fill the void.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 6 Helpful 24
Question
I want to put siding on a shed door. How do I install hinges in a way that will allow the door to open without creasing the siding?
Mark Spelman
Construction Professional
Mark Spelman is a General Contractor based in Austin, Texas. With over 30 years of construction experience, Mark specializes in constructing interiors, project management, and project estimation. He has been a construction professional since 1987.
Mark Spelman
Construction Professional
Expert Answer
In order to prevent the siding from creasing, I recommend beveling the siding edges.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 7 Helpful 13
Question
Can I put hinges on the outside of a door?
Mark Spelman
Construction Professional
Mark Spelman is a General Contractor based in Austin, Texas. With over 30 years of construction experience, Mark specializes in constructing interiors, project management, and project estimation. He has been a construction professional since 1987.
Mark Spelman
Construction Professional
Expert Answer
For security reasons, you probably shouldn't put hinges on the outside of a door. If you did, then people could break in easier because they could just pop the pins out.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 12 Helpful 19

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

The hinge flap with the most knuckles is the one that should be attached to the door frame.
Thanks
Helpful20 Not Helpful2
Hinges are rated for the weight of the door, the number of openings the door will receive, and other factors such as exposure to elements. Make sure you get the correct hinge for your door and its use. Measure the length of the hinge and check the edge and thickness to help determine this.
Thanks
Helpful5 Not Helpful0
If you have a really beat up jam and the jam is cracked, just replace the old 3-hole hinges with 4-hole hinges. This way you only have to cut with a chisel a small 1/8 inch off the door and 1/8 inch off the jam. Since the 4-holes are in different places than the 3 hole hinge, you can avoid moving the hinges and avoid replacing an old jam that is damaged. Use self-drilling screws on old wood jams because they are brittle and pointed screws will break the jam.
Thanks
Helpful3 Not Helpful1