How to Install Windows from a USB Flash Drive

Expert guide to USB drive Windows installation

This How.com.vn teaches you how to use a USB flash drive to install a version of the Windows operating system onto a Windows computer. Using a USB flash drive is useful when your computer doesn't have a CD drive or when you don't have an operating system installation disc.

Part 1

Part 1 of 4:

Creating the Installation Flash Drive for Windows 10

Download Article

1
Check the computer's architecture number. Before you download an installation tool for your preferred operating system, you'll need to know whether the computer on which you want to install Windows runs a 32-bit system or a 64-bit system.
- Make sure that you do this on the computer on which you're going to install Windows.
2
Make sure that you have at least a 8-gigabyte flash drive. Windows needs at least eight gigabytes of space for its installation file.
- Flash drives are fairly cheap; you can get a 16-gigabyte flash drive—twice times the space you need—for less than $10.
Advertisement
The flash drive should fit into one of your computer's rectangular USB ports.
4
Format the flash drive to FAT32 or exFAT. When formatting your flash drive, click the File system drop-down box, then click FAT32 or exFAT in the drop-down menu.
- Formatting your flash drive will erase everything on it.
Open the Windows 10 download page, then click Download tool now at the bottom of the page.
6
Run the installation tool. Double-click the "MediaCreationTool" EXE file, click Yes when prompted, accept any terms, and fill out any on-screen sections until you get to the installation section.
- As part of the installation tool, you'll be prompted to select a language, an edition of Windows, and an architecture for the setup process. Make sure to use the same architecture here as you found in step two of this part.
Once the installation section of the Media Creation Tool window opens, click the "Create installation media" checkbox, click Next, select your computer's language, edition, and architecture, click Next, click the flash drive's name, and click Next.
This may take several minutes. Once all of the setup files have downloaded (or pasted) into the flash drive, you can proceed with changing your computer's boot order.

Part 2

Part 2 of 4:

Creating the Installation Flash Drive for Windows 8.1

Download Article

1
Check the computer's architecture number. Before you download an installation tool for your preferred operating system, you'll need to know whether the computer on which you want to install Windows runs a 32-bit system or a 64-bit system.
- Make sure that you do this on the computer on which you're going to install Windows.
2
Make sure that you have at least a 4-gigabyte flash drive. Windows needs at least four gigabytes of space for its installation file.
- Flash drives are fairly cheap; you can get a 16-gigabyte flash drive—four times the space you need—for less than $10.
The flash drive should fit into one of your computer's rectangular USB ports.
4
Format the flash drive to FAT32 or exFAT. When formatting your flash drive, click the File system drop-down box, then click FAT32 or exFAT in the drop-down menu.
- Formatting your flash drive will erase everything on it.
Open the Windows 8.1 download page, scroll down and select a version of Windows 8.1, click Confirm, select a language and click Confirm, and click either 32-Bit Download or 64-Bit Download in the middle of the page. This will prompt the disk image (ISO) file to download.
Make the flash drive bootable. If you're installing Windows 8.1, you'll need to use Command Prompt or another bootable USB method to ensure that your computer will recognize your USB flash drive as a software installation location.
Copy the downloaded ISO file by selecting it and pressing Ctrl+C, then open your formatted, bootable flash drive and press Ctrl+V. The ISO file will appear on the flash drive after a few minutes, after which point you can proceed with changing your computer's boot order.

Part 3

Part 3 of 4:

Changing Your Computer's Boot Order

Download Article

If you're merely trying to install a new version of Windows on your existing computer, skip this step.
Insert the USB flash drive into a USB port on the computer.
3
Prompt the computer to restart. Click Start
, click Power
, and click Restart. Your computer will begin to restart.
- If the computer is off, press its power button to turn it on, then move to the next step. If the computer turns on when you open its lid or move the mouse, you'll still need to restart it before proceeding.
4
Rapidly press the computer's BIOS key. As soon as the computer's startup screen appears (the screen right after the computer shuts down and is beginning to restart), begin pressing the BIOS key. Your computer's BIOS key will vary depending on the manufacturer, but it will usually be one of the function keys (e.g., F2), Esc, or Del.^{[1]XExpert SourceLuigi Oppido
Computer & Tech SpecialistExpert Interview. 10 June 2020.}
- You can check your computer's BIOS key online or in the manual that came with your computer.
- Many computers will flash a "Press [key] to enter setup" (or similar) message at the bottom of the screen as your computer is starting up. This is the key that you should press.
- If you miss your opportunity and the computer finishes the restart cycle, you'll need to restart it and try again.
This section is usually in the Advanced or Advanced Options tab, but each BIOS menu is different. The "Boot Order" section will have a list of different startup locations, including your hard drive's name and your CD drive.^{[2]XExpert SourceLuigi Oppido
Computer & Tech SpecialistExpert Interview. 10 June 2020.}
6
Select your flash drive's name. Using the arrow keys, move the highlight bar down until it's covering the flash drive's name.^{[3]XExpert SourceLuigi Oppido
Computer & Tech SpecialistExpert Interview. 10 June 2020.}
- On some computers, you'll instead select Removable Storage or Removable Drives (or something similarly titled).
You'll usually do this by pressing the + key until the flash drive is at the top, but check the legend at the bottom or on the side of the BIOS screen to see if your controls are different.^{[4]XExpert SourceLuigi Oppido
Computer & Tech SpecialistExpert Interview. 10 June 2020.}
8
Save your changes and exit the BIOS. There's usually a key that you can press to do this, so check the legend to see what it is and then press it.
- You may have to press another key to confirm this decision.
If your computer doesn't greet you with a "Press any key" screen and instead finishes the restart cycle, restart it again to boot from the flash drive. This will launch the Windows setup process.

Part 4

Part 4 of 4:

Installing Windows

Download Article

When you see the "Press any key" line of text, press any key on your computer's keyboard to proceed with the Windows installation.
2
Select a language and region. When the Windows installation window pops up, select a language, region, and any other preferences listed there.
- You may also be prompted to select keyboard settings here.
- On Windows 7, you'll check the "I agree" box here instead, then skip ahead to the "Select a partition" step.
It's in the lower-right corner of the page.
4
Enter your product key. When prompted, type in the product key that came with your computer or installation disc, then click Next.
- On Windows 10, you must first click Install now. You can also skip the product key entry for now by clicking the Skip option.
- On Windows 7, you won't be asked for your product key until after the installation is complete.
Check the "I agree" box, then click Next.
Check the "Custom" box, then click Next
7
Select an installation partition. Double-click the partition on which you want to install Windows, then confirm your choice when prompted. You may also need to select the empty partition and click Next to prompt the installation process to begin.
- On Windows 7, you'll select the partition that you want to use, click Delete, confirm the decision when prompted, click the empty hard drive, and click Next to begin the installation process.
Your computer may restart several times during this process, and the installation may take several minutes to over an hour depending on your computer's speed.
9
Follow any on-screen instructions. After Windows is installed on the computer, you'll be asked to set up a few more preferences (e.g., your language, account name, email address, etc.) before you can begin using Windows.
- On Windows 7, you'll be asked to enter your product key here.

Expert Q&A

Search

Add New Question

Question
How do I change my computer's boot order?
Luigi Oppido
Computer & Tech Specialist
Luigi Oppido is the Owner and Operator of Pleasure Point Computers in Santa Cruz, California. Luigi has over 25 years of experience in general computer repair, data recovery, virus removal, and upgrades. He is also the host of the Computer Man Show! broadcasted on KSQD covering central California for over two years.
Luigi Oppido
Computer & Tech Specialist
Expert Answer
You'll have to change this in the system's BIOS. Restart your computer and before it fully boots up, press the BIOS key, which is one of the function keys on your keyboard's top row. On the BIOS screen, you can then go into the settings and change the priority order so that your flash drive loads Windows first.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 2 Helpful 2
Question
I want to install Windows but am being prompted that there is a missing operating system. What now?
Community Answer
Have you put the OS on the drive? If not, install it on there. You can also try to install an *.iso file on the drive.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 6 Helpful 4
Question
What if I'm putting in a brand new hard drive?
Community Answer
If you are installing from scratch, you will still need to create the boot media using one of the above steps on a working computer. Once the boot media is created, you will use it on the computer that has a new hard drive. Just remember that with a new hard drive and installation, you need to get a registration code to activate Windows.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 0 Helpful 2

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

While Windows installations are usually best-suited to Windows machines, you can also install Windows 10 on a Mac using BootCamp.
Thanks
Helpful0 Not Helpful0

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!

Warnings

Navigating the BIOS can be extremely frustrating since no two BIOS pages are identical. To negate this frustration, find your computer's manual and look up the BIOS information there.
Thanks
Helpful1 Not Helpful1