This article was co-authored by Ryaan Tuttle and by How.com.vn staff writer, Mason Martinez, BA. Ryaan Tuttle is a Home Improvement Specialist and the CEO of Best Handyman, Inc. in Boston, Massachusetts. With over 17 years of experience, he specializes in building home service businesses, focusing on creating scalable and efficient brands. With the help of his global team, the companies have achieved over 10+ million in sales and received recognition through magazine features, and enjoy partnerships with How.com.vn and Jobber field service software. Boston Magazine and LocalBest.com have named Best Handyman Boston the Best Handyman in Boston. Ryaan holds Construction Supervisor and Home Improvement Contractor Licenses.
There are 9 references cited in this article, which can be found at the bottom of the page.
This article has been fact-checked, ensuring the accuracy of any cited facts and confirming the authority of its sources.
This article has been viewed 449,494 times.
Dust, dirt, grime, and other buildup can accumulate on a lock over time. This accumulation can result in a "sticky" lock, which means it becomes difficult to insert and pull out your key. Sticky locks can be frustrating, and it's likely the last thing you want to deal with when you're coming home after a long day. In this guide, Expert Home Specialist Ryaan Tuttle recommends inexpensive products that can lubricate and move your lock smoothly again in just a few minutes!
Easy Ways to Lubricate a Sticky Lock
Use powdered graphite, Teflon, or PTFE-based lubricants like WD-40 Dry Lube to clear away any gunk or debris stuck in the lock. Slide your key in and out of the lock to spread the lubricant around the lock. Reapply lubricate once every season to keep your locks gunk-free.
Steps
Lubricating the Lock Using Powdered Graphite
- Cut the plastic tip off the end of a tube of powdered graphite. If your lock is so sticky that you can barely get your key in and out, you may need something as tough as powdered graphite, which comes in a tube. Snip the plastic off the end of the nozzle with a sharp pair of scissors so the graphite can flow freely.[1]
- Powdered graphite is a dry lubricant that encourages smooth movement between two metal surfaces without attracting grime.
- The graphite particles form a fine layer on the surface of the metal, lubricating and "brushing" away dust and dirt.
- In a pinch, you can rub a graphite pencil against the surface of the lock.
- Place the end of the nozzle up to the opening of the lock. Depending on the bottle size, you can fit the nozzle part of the way inside the opening. If not, hold it flush to the lock. It should still be able to penetrate deep enough to lubricate the locking mechanism.[2]
- Hold the tube level so that graphite doesn't escape around the opening.
Advertisement - Squeeze the bottle or tube gently to release a few puffs of graphite. Try not to use an excessive amount—graphite is a potent substance, so a little goes a long way. Wait 1-2 minutes so the graphite can start working its magic on the lock.[3]
- If possible, wear a pair of disposable gloves to avoid getting graphite all over your hands.
- Test the lock by inserting and removing your key once or twice. It should be easy to get the key in and out of the lock now. Turn the key in both directions to see how fluidly it moves.[4]
- Sliding your key in and out of the lock also helps spread the graphite inside the lock.
- Repeat the application as needed. If the lock still feels sticky, hit it again with a few more blasts of powdered graphite. Test the lock after each application. Once the graphite has spread, it will clear away the gunk hindering the lock's movement, leaving you with a fully functioning, hassle-free door.
- Try squeezing a little graphite onto the door's latch for especially stubborn locks. This is the part of the locking mechanism that moves in and out of the door frame when you turn the knob. Lubricating the latch can help ease the keying action.[5]
- If you still need help, call a professional locksmith to look at your locks. Sometimes, the problem is with the pins inside the lock slipping down and loosening, which can't be fixed with lubricant.
Spraying the Lock with WD-40 Dry Lube
- Attach the applicator straw to the nozzle of a can of WD-40 Dry Lube. Expert Home Specialist Ryaan Tuttle suggests using the thin, flexible red applicator straw that fits right over the nozzle where the oil comes out. The straw will allow you to penetrate deep into the lock, lubricating it more effectively.[6]
- While WD-40 is a common household item that can be used on nearly everything, it's not recommended for long-term use. It's effective for a quick fix, but dust and debris can still stick to the surface.[7]
- WD-40 Dry Lube PTFE Spray is dust and dirt-resistant and has long-lasting corrosion protection.
- Avoid using any lubricants that aren't appropriate for home improvement uses, such as cooking, botanical, or sewing machine oil. Most oils will attract dust that forms new layers on the locking mechanism, worsening the problem.[8]
- Insert the straw into the lock opening and spray in short bursts. Guide the straw as far as possible to ensure you're hitting every part of the locking mechanism that may be sticking with the WD-40 Dry Lube. Tuttle says to press the button on the rear of the canister to release the lubricant. Don't be afraid to use a liberal amount if you need to. Keep spraying until oil overflows from the lock.[9]
- Wear gloves while handling lubricants to prevent a slippery mess.
- Wait 1-2 minutes and test the lock with your key. Give the lubricant a little time to break down the dust and dirt accumulated inside the lock. Then, slide your key in and out of the lock a few times to see how smoothly it moves.[10]
- If the lock still sticks, you may need to try a more heavy-duty lubricant like powdered graphite.
Preventing Sticky Locks
- Regularly clean your locks with multi-use WD-40. If you're stuck in a pinch and have nothing but oil or regular WD-40, that's okay! These are still effective methods for a quick sticky lock fix. Afterward, apply a generous amount of multi-use WD-40 to dry the lock and remove lingering lubricants.[12]
- Regular use can limit the amount of dust and dirt accumulating over time, making sticky locks less likely.
- Lubricate locks at least once every three months. How often you should lubricate your locks depends on the product you're using. However, to prevent your locks from sticking, touch them up once every season, especially for Telfon-based lubricants. However, if you're using WD-40, you may have to go in once a month since it dries out quickly.[13]
- With stronger lubricants, like graphite, you may only need to lubricate your locks once a year.
- Update your locks when necessary. If your lock is constantly getting stuck or sticky, it may be time to get a replacement before you break a key. You can get the same model or an updated keypad, so you no longer have to deal with keys; the choice is yours. Contact your local locksmith for advice and further assistance, or take matters into your own hands and DIY your new lockset!
Expert Q&A
- QuestionHow do I get a key out of a sticky lock?Mark SpelmanMark Spelman is a General Contractor based in Austin, Texas. With over 30 years of construction experience, Mark specializes in constructing interiors, project management, and project estimation. He has been a construction professional since 1987.
Construction ProfessionalTry to wiggle it back and forth, then grab the key with a vise grip tool and pull.
Video
Tips
- Always wash your hands if your exposed skin comes into contact with WD-40 or powdered graphite.Thanks
- Keep WD-40 and powdered graphite stored somewhere accessible in your home so you'll have them on hand when your locks start acting up.Thanks
- The problem may only sometimes be with the lock. Inspect your keys for signs of damage and overuse. Have new ones cut if they're worn down. Dull key teeth can have difficulty displacing the pins inside a lock.Thanks
Warnings
- Graphite can have a mild corrosive effect on galvanized aluminum. Double-check to ensure no part of your lock or door frame is aluminum before using powdered graphite.Thanks
- Take caution when using knives or scissors to prevent injury.Thanks
- Use powdered graphite sparingly. Graphite tends to be overused and will eventually start to cake onto a lock, making it harder to operate. After a few years, liquid graphite gets gummy, and if you use WD-40 on it, it loosens up the liquid graphite.Thanks
- Be careful not to inhale graphite particles. This could lead to illness or infection.Thanks
- Working with powdered graphite can get messy. Keep this in mind when using it to bust a sticky lock.Thanks
References
- ↑ https://rentpost.com/resources/article/how-to-fix-a-sticky-lock/
- ↑ https://youtu.be/T8KvwfeUB6I?t=4
- ↑ https://youtu.be/kfFzOYQRCko?t=46
- ↑ https://rentpost.com/resources/article/how-to-fix-a-sticky-lock/
- ↑ https://rentpost.com/resources/article/how-to-fix-a-sticky-lock/
- ↑ Ryaan Tuttle. Home Improvement Specialist. Expert Interview. 13 January 2021.
- ↑ https://www.keytek.co.uk/security-tips/is-wd40-good-for-door-locks/
- ↑ http://www.dummies.com/home-garden/home-improvement/doors/how-to-lubricate-a-door-lock/
- ↑ Ryaan Tuttle. Home Improvement Specialist. Expert Interview. 13 January 2021.
- ↑ http://www.dummies.com/home-garden/home-improvement/doors/how-to-lubricate-a-door-lock/
- ↑ https://www.ptlockandsafe.co.uk/blog/how-to-lubricate-a-cylinder-lock
- ↑ https://www.elocal.com/resources/home-improvement/locksmith/faq/wd-40-locks/
- ↑ https://www.squirelocks.co.uk/blog/general-security/lock-maintenance-how-to-lubricate-locks/
About This Article
To fix a sticky lock, go purchase a can of WD-40 from your local hardware store. To use it, you may need to attach the applicator straw to the nozzle of the can, if it's not already attached. Put on some gloves before you start spraying it because WD-40 can make a mess. Then insert the straw on the can into the lock and spray in a liberal amount of WD-40. Let it sit for a few minutes and then test your lock with a key to see if it worked. For instructions from our Contractor reviewer on how to use powdered graphite to fix a lock, read on!
Reader Success Stories
- "I thought I needed to call a key and lock service! Instead I read this, looked in my garage and found WD-40, followed the instructions and the problem was solved! Thank you!"..." more
Did this article help you?
⚠️ Disclaimer:
Content from Wiki How English language website. Text is available under the Creative Commons Attribution-Share Alike License; additional terms may apply.
Wiki How does not encourage the violation of any laws, and cannot be responsible for any violations of such laws, should you link to this domain, or use, reproduce, or republish the information contained herein.
- - A few of these subjects are frequently censored by educational, governmental, corporate, parental and other filtering schemes.
- - Some articles may contain names, images, artworks or descriptions of events that some cultures restrict access to
- - Please note: Wiki How does not give you opinion about the law, or advice about medical. If you need specific advice (for example, medical, legal, financial or risk management), please seek a professional who is licensed or knowledgeable in that area.
- - Readers should not judge the importance of topics based on their coverage on Wiki How, nor think a topic is important just because it is the subject of a Wiki article.