Download ArticleDownload ArticleHow.com.vn is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 12 people, some anonymous, worked to edit and improve it over time.
The How.com.vn Video Team also followed the article's instructions and verified that they work.
This article has been viewed 685,193 times.
Learn more...
Scratches on DVDs normally appear after regular use, but they can be polished away easily with a few cleaning techniques. No matter how well you care for your DVDs, they're going to get some scratches at some point. That's just what happens. Fortunately, it's very easy to get rid of those scratches and make your DVDs watchable again, so you never have to worry about your collection being lost or damaged beyond repair!
Repairing Scratches on a CD or DVD
Clean the DVD with a microfiber cloth before you begin. Wipe from the center to the edges. Using a circular motion may scratch the disc more. Apply a small amount of petroleum jelly to the cloth and rub it gently on the surface of the disc. Wipe the petroleum jelly away from the center to the edges.
Steps
Assess the damage. Decide whether your DVD can be fixed, or whether it has irreparable damage.- As mentioned above, disks with scratches that go deep will not be able to be mended. To assess the damage, hold the disk up in the sunlight. If sunlight shines through the scratch, the DVD is unlikely to be mended.
- Scratches that are circular, around the laser track, are more likely to result in a permanently damaged disk. Small scratches that run across the radius are easier to fix.
Clean the DVD. Use a soft cloth and some very clean water. You may also use alcohol, but most other solvents may damage the discs.Advertisement
Find a jewelry cloth (also known as a jeweler's rouge, or a rouge cloth). A cloth specialized for eyeglasses would also do.
Hold the disk from the sides with your non-dominant hand. Then, gently wipe the disk from the center to the edges, across the radius, using the jewelry cloth. Continue wiping around the disk, from inside to outside, until the entire disk has been cleaned.
Insert the disk into your DVD player. Try to play it, to evaluate if cleaning the disk solved the problem. If it is not repaired, more extreme measures are required.
Try to create a uniform surface. There are several methods for doing this:- Buy rubbing polish from an automotive store. Apply a small amount of the compound. Rub it across the radius until it covers the entire surface. Allow it to sit for a few minutes. Then, rinse and rub with a soft cloth. Use this product in a well-ventilated area, and be sure to wash your hands thoroughly after polishing.
- Buy a mechanical scratch remover. This also removes the first layer of disk material and polishes the disk. Insert the DVD and turn the hand crank according to package directions. Buff with your jewelry cleaning cloth.
- Buy a professional DVD scratch polish, such as SkipDr. Apply the product across the radius. Allow it to sit according to package directions, so that the outer layer of disk will be removed. Rinse and/or buff the disk with the jewelry cloth.
- Try basic toothpaste. Get a plain enamel-cleaning paste at your local drugstore. The grit inside toothpaste helps to clean and buff the surface of the disk. Apply toothpaste across the radius until the entire disk is covered. Let the toothpaste dry. Then, rinse it clean and buff with your jewelry cleaning cloth across the radius.
Assess the damage. Decide whether your DVD can be fixed, or whether it has irreparable damage. (For more on this, see above.)
Clean the DVD. Use a soft cloth and some very clean water. You can also use alcohol, but many cleaning solvents can damage the discs.
Find a jewelry cloth (also known as a jeweler's rouge, or a rouge cloth). A cloth specialized for eyeglasses would also do.
Hold the disk from the sides with your non-dominant hand. Then, gently wipe the disk from the center to the edges, across the radius, using the jewelry cloth. Continue wiping around the disk, from inside to outside, until the entire disk has been cleaned.
Insert the disk into your DVD player. Try to play it, to evaluate if cleaning the disk solved the problem. If it is not repaired, more extreme measures are required.
Remove the vaseline. Use a method similar to what you did when cleaning the disc. It may be useful to use alcohol (even if you didn't when initially cleaning the disc) to help break up the vaseline. Make sure there are no smudges or evident residue left behind.
Community Q&A
- QuestionCan I use Pledge to fix scratches on my DVD?
Community AnswerYou can follow the methods that are listed in the article. - QuestionCan I use car polish to repair a disc?Community AnswerIt worked for me on a non-readable DVD. I used Meguiar's G19216 Ultimate Polish car polish. The disk was usable after the application.
- QuestionWill all purpose miracle cloth work on a scratched DVD?
Community AnswerWhile I am not sure what Miracle cloth is, Magic Eraser products will work because they are made of the same material that the data layer is made up of-with the exception of slight heat. Using it in circular way from center to outer slowly and gently should wipe out any scratches up to moderate.
Tips
- Store your DVDs in a dark, cool and dry area. Disks that are exposed to sunlight, moisture, and heat are more likely to warp and scratch.Thanks
Warnings
- Do not use these DVD repair methods on a Blu Ray disk. Blu Rays are more scratch resistant, but they are easily ruined with the application of polishing substances.Thanks
- Do not use small, circular motions as you polish. This can create polishing marks that will also interfere with the laser light as it passes to and from the reflective surface.Thanks
References
About This Article
If your DVD has some light surface scratches in it, you may be able to fix them by polishing the DVD. Clean the surface of the DVD with a soft cloth dipped in clean water. Next, use a dry microfiber cloth to wipe the DVD, moving from the center of the disk out to the edges. If the DVD still doesn’t play right after that, gently buff the surface with a polishing compound, such as automotive rubbing polish, DVD polish, or toothpaste. Apply the polish to the whole surface, then rinse it off and buff the disk with a clean, dry jewelry cleaning cloth.
Reader Success Stories
"I was trying to install my new 9 DVD PC game! But one of them had too many scratches and that's why the PC wasn't able to run it. Then as usual, I looked for help from How.com.vn.com and got the solution to fill the scratches using Vaseline. And it worked!"..." more
Is this article up to date?
⚠️ Disclaimer:
Content from Wiki How English language website. Text is available under the Creative Commons Attribution-Share Alike License; additional terms may apply.
Wiki How does not encourage the violation of any laws, and cannot be responsible for any violations of such laws, should you link to this domain, or use, reproduce, or republish the information contained herein.
- - A few of these subjects are frequently censored by educational, governmental, corporate, parental and other filtering schemes.
- - Some articles may contain names, images, artworks or descriptions of events that some cultures restrict access to
- - Please note: Wiki How does not give you opinion about the law, or advice about medical. If you need specific advice (for example, medical, legal, financial or risk management), please seek a professional who is licensed or knowledgeable in that area.
- - Readers should not judge the importance of topics based on their coverage on Wiki How, nor think a topic is important just because it is the subject of a Wiki article.
