Download ArticleDownload ArticleThis article was reviewed by Grace Imson, MA. Grace Imson is a math teacher with over 40 years of teaching experience. Grace is currently a math instructor at the City College of San Francisco and was previously in the Math Department at Saint Louis University. She has taught math at the elementary, middle, high school, and college levels. She has an MA in Education, specializing in Administration and Supervision from Saint Louis University.
There are 8 references cited in this article, which can be found at the bottom of the page.
This article has been fact-checked, ensuring the accuracy of any cited facts and confirming the authority of its sources.
This article has been viewed 115,040 times.
Net force is the total amount of force acting on an object when you take into account both magnitude and direction. An object with a net force of zero is stationary. An unbalanced force, or net force of a magnitude greater than or less than zero, leads to acceleration of the object.[1]Once you have calculated or measured the magnitude of a force, combining them to find the net force is simple. Sketching a simple force diagram and making sure all of the forces are labelled and in the correct direction makes calculating net force a breeze.
Steps
Draw a free body diagram. A free body diagram is a quick sketch of an object that illustrates all of the forces acting on it and the direction these forces are acting. Read through the problem and draw a simple sketch of the object in question and the arrows representing every force acting on that object.[2]- For example: Calculate the net force of an object weighing 20 N sitting on a table being pushed towards the right with 5 N of force, but staying still because of a friction force of 5 N.
Establish the positive and negative directions of forces. The standard is to set arrows pointing upward or to the right as positive and arrows pointing downward or to the left as negative. Remember, you can have multiple forces working in the same direction. Forces that oppose each other will always have opposite signs (one positive, one negative).[3]- If you are working with multiple force diagrams, make sure you keep the directions consistent throughout.
- Label the magnitude of each force with a “+” or “-“ sign based on the direction of the arrow you’ve drawn on the force diagram.
- For example: The force of gravity is a downward force making it negative. The normal force is upward making it positive. The push force is to the right making it positive, while the friction force acts to oppose this force towards the left (negative).
Advertisement
Label all forces. Be sure to label all of the forces that are acting on the object. When an object is resting on a surface there is a downward force of gravity (Fg) and an equal force in the opposite direction called the normal force (Fn). In addition to these two forces, label the rest of the forces stated in the problem. Write the magnitude of each force in Newtons next to the given label.[4]- A standard way to label forces is with a capital F and a subscript of first letter of the force. For example, if there is a force due to friction, label it Ff.
- Force due to gravity: Fg = -20 N
- Normal force: Fn = +20 N
- Friction force: Ff = -5 N
- Push force: Fp = +5 N
Sum the magnitudes of all the forces. Now that you have labelled all forces with both a direction and magnitude, you just need to add all of them together. Write an equation for net force (Fnet) where Fnet is equal to the sum of all the forces acting on the object.[5]- For example: Fnet = Fg + Fn + Ff + Fp = -20 + 20 -5 + 5 = 0 N. Because the net force is 0 N, the object is stationary.
Sketch a force diagram. When you have a diagonal force acting at an angle on the object, you need to find the horizontal (Fx) and vertical (Fy) components of the force to find its magnitude. You'll have to use trigonometry and the directional angle (usually θ "theta"). The directional angle θ is always measured counter-clockwise from the positive x-axis.[6]- Draw the force diagram including the angle of the diagonal force.
- Sketch each arrow in the proper direction the force is acting and label it with the proper magnitude.
- For example: Sketch the diagram for a 10 N object experiencing a 25 N force up and to the right at an angle of 45°. There is also a friction force to the left of 10 N.
- Forces include: Fg = -10 N, Fn = + 10 N, Fp = 25 N, Ff = -10 N.
Calculate Fx and Fy using the three basic trigonometric ratios (SOH CAH TOA). Using the diagonal force (F) as the hypotenuse of a right-triangle and Fx and Fy as the legs of that triangle, you can calculate each in turn.[7]- Remember, CAH: cosine(θ) = adjacent/hypotenuse. Fx = cos θ * F = cos(45°) * 25 = 17.68 N.
- Remember, SOH: sine(θ) = opposite/hypotenuse. Fy = sin θ * F = sin(45°) * 25 = 17.68 N.
- Note that there may be multiple diagonal forces acting on an object simultaneously, so you'll have to find Fx and Fy of each force in the problem. Then sum the Fx values to obtain the total force in the horizontal direction and sum the Fy values for the total force in the vertical direction.
Redraw the force diagram. Now that you have calculated the individual horizontal and vertical components of the diagonal force, you can sketch a new force diagram representing these forces. Erase the diagonal force and instead, draw the arrows for the individual horizontal and vertical magnitudes.- For example, instead of one diagonal force, the diagram will now have one vertical force pointing up with a magnitude of 17.68 N and one horizontal force pointing to the right with a magnitude of 17.68 N.
Sum all of the forces in the x and y directions. Once you have drawn a new force diagram, calculate the net force (Fnet) by adding all of the horizontal forces together and all of the vertical forces together. Remember to keep all of the directions of the vectors consistent throughout the problem.- For example: Horizontal vectors are all forces along the x axis: Fnetx = 17.68 – 10 = 7.68 N.
- Vertical vectors are all forces along the y axis: Fnety = 17.68 + 10 - 10 = 17.68 N.
Calculate the magnitude of the net force vector. At this stage, you have two forces: one in the x-direction and one in the y-direction. The magnitude of the force vector is the hypotenuse of the triangle formed by these two component vectors. Simply use the Pythagorean Theorem to calculate the hypotenuse: Fnet = √ (Fnetx2 + Fnety2).[8]- For example: Fnetx = 7.68 N and Fnety = 17.68 N
- Plug into equation: Fnet = √ (Fnetx2 + Fnety2) = √ (7.682 + 17.682)
- Solve: Fnet = √ (7.682 + 17.682) = √(58.98 + 35.36) = √94.34 = 9.71 N.
- The magnitude of force is 9.71 N in a diagonal up and to the right.
Community Q&A
- QuestionCan a weight be negative?
Community AnswerIt depends. Weight should be the mass multiplied by gravity. If gravity is represented as pointing downwards, it can sometimes be written in a vector form as a negative number, and then you would get a negative weight. However, mass can't be negative, and weight can only be in a negative direction. - QuestionHow to find the vertical and horizontal force when only given an angle?
StartrekkerCommunity AnswerIf given force is F and it is at an angle x with the x-axis. Take its x component as F cosx. Its y component is F sinx. - QuestionWhat is the net force of a car with 1500 kg mass and an acceleration of 2.0 m/s?
I_l1ke_gam3sCommunity AnswerF = ma. The mass is 1500, and the acceleration is 2. (1500)(2) = 3000 Newtons.
Video
Tips
References
- ↑ http://www.physicsclassroom.com/class/newtlaws/Lesson-2/Determining-the-Net-Force
- ↑ https://www.youtube.com/watch?v=qPaqDfRKBI4
- ↑ https://www.youtube.com/watch?v=JTfBvzscE8c
- ↑ https://www.youtube.com/watch?v=EQJe6x-83_w
- ↑ https://www.youtube.com/watch?v=yUZ6_cY37FY
- ↑ http://www.physicsclassroom.com/class/vectors/Lesson-3/Resolution-of-Forces
- ↑ http://www.physicsclassroom.com/class/vectors/Lesson-3/Resolution-of-Forces
- ↑ https://www.mathsisfun.com/pythagoras.html
About This Article
To find net force, start by drawing a diagram of the object being acted upon, including arrows to represent all of the forces acting on it that are listed in the problem. Then, make all of the arrows pointing upward or to the right positive, and the arrows pointing downward or to the left negative. Next, label all of the forces in the problem, as well as the force of gravity, which is equal to -20 newtons, and the normal force, which is equal to 20 newtons. Finally, sum the magnitude of all the forces to find the net force. To learn how to calculate diagonal force, scroll down!
Did this article help you?
⚠️ Disclaimer:
Content from Wiki How English language website. Text is available under the Creative Commons Attribution-Share Alike License; additional terms may apply.
Wiki How does not encourage the violation of any laws, and cannot be responsible for any violations of such laws, should you link to this domain, or use, reproduce, or republish the information contained herein.
- - A few of these subjects are frequently censored by educational, governmental, corporate, parental and other filtering schemes.
- - Some articles may contain names, images, artworks or descriptions of events that some cultures restrict access to
- - Please note: Wiki How does not give you opinion about the law, or advice about medical. If you need specific advice (for example, medical, legal, financial or risk management), please seek a professional who is licensed or knowledgeable in that area.
- - Readers should not judge the importance of topics based on their coverage on Wiki How, nor think a topic is important just because it is the subject of a Wiki article.
