How to Dissolve Salt in Water

Salts are neutral compounds that consist of some set ratio of positive ions (cations) to negative ions (anions). Salts are formed when an acid and a base come in contact and neutralize each other. Common salts are sodium chloride (table salt) and magnesium sulfate (Epsom salt). While one salt is different from another, they share similar properties. One of these properties is that a salt can be dissolved into water.

Part 1

Part 1 of 3:

Choosing Your Ingredients

Download Article

1
Choose a salt. There are many different salts available, and they all have different properties.The amount of Epsom salt (MgSO₄) that you can dissolve into a given amount of water at a given temperature will differ from the amount of table salt (NaCl) that you can dissolve into the same water.^{[1]XResearch source}
- If you are trying to understand the dissolution process in general, you should stick with using table salt since the particles are smaller and will therefore dissolve easier.
- If you need to study the properties of a specific salt, use that salt.
2
Choose your water. The kind of water you use matters. For example, tap water has more contaminants than distilled water. Deionized water can often be even more pure than distilled water. The purer the water (i.e. the less contaminants it contains) the more salt you will be able to dissolve into it.^{[2]XResearch source}
- This is because there are fewer water molecules interacting with other substances in the water, and therefore, more water molecules free to dissolve the salt.
Advertisement
3
Decide how much of each you will use. You will need to decide how much (how many grams) salt you intend to put into your water. You will also need to know how much water you are using. If you use too much salt (or too little water) then you will not be able to dissolve all of it.^{[3]XTrustworthy SourceAmerican Chemical SocietyScientific society for those involved with chemistry and publisher of several leading peer-reviewed scientific journalsGo to source}
- You can add salt slowly to see approximately how much can be dissolved in a given amount of water (at a given temperature).
- You can dissolve more salt by adding more water or heating it up.

Part 2

Part 2 of 3:

Mixing Your Solution

Download Article

1
Pour your water into a container. If you are measuring out a specific amount of water, you can use a graduated cylinder or a beaker. If you aren’t as worried about exact measurements, any container will do. Keep in mind that the temperature of the container can affect the temperature of your water. This isn’t a big deal for most experiments, but if you are doing highly controlled experiments, it is worth considering.^{[4]XResearch source}
- Make sure to label your container, especially if you are working in a lab with other people.
Put weigh paper or a weigh boat on your scale and zero the scale. Add salt a little at a time until you reach the desired amount of salt. Record the exact amount of salt that you used.^{[5]XResearch source}
If the salt does not immediately dissolve, try mixing it with a spoon or spatula. You need water molecules to come in contact with your salt to dissolve it, and stirring things up helps that happen more quickly. You can also heat the mixture to help the salt dissolve.^{[6]XResearch source}

Part 3

Part 3 of 3:

Accounting for Other Variables

Download Article

1
Account for the temperature of the water. When you are analyzing how much salt you can or cannot dissolve into a given volume of water, you should consider the temperature. Warmer water will dissolve more salt than cooler water, regardless of the type of salt you are using. If you are doing a formal experiment, you should record the exact temperature of your water.^{[7]XResearch source}
- There is more space between the water molecules if it is at a higher temperature, which is why it dissolves salt better. Cold water has less space between the water molecules, so less salt fits in between them.
The more solutes (things dissolved into the water) present, the less water molecules are available to interact with your salt. There can also be interaction between the solutes and the salt, depending on what solutes are present. If you are not studying the interaction of a specific solute with your salt, it is best to use distilled or deionized water to minimize the amount of contamination.^{[8]XResearch source}
Your water isn’t the only non-perfect substance you’ll be working with. Your salt is bound to have some level of impurity. If you purchased your salt, it is likely food or commercial grade and the impurities will be negligible for most experiments. If you made your own salt or mined your own salt, then impurities might be higher.^{[9]XResearch source}

Community Q&A

Search

Add New Question

Question
Should I use hot water for this experiment?
Community Answer
Hot water will make the salt dissolve more easily, but you don't have to use hot water if you don't want to.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 10 Helpful 18
Question
How do I find the solubility of the salt in a given amount of water?
TomPN
Top Answerer
Measure out a fixed amount of water (e.g., 1 liter). Add salt one gram at a time, stirring until it completely dissolves. Repeat until no more will dissolve. With table salt and pure water, you should get around 350-360 grams of salt per liter of water to dissolve.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 6 Helpful 9
Question
How do I know when the salt is dissolved?
Akshithaa
Community Answer
The water will be clear, without any residue in the bottom of the glass.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 11 Helpful 18

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Supersaturated solutions (a solution with more salt than would normally be allowed) can be made by heating the water and dissolving an excess amount of salt and then cooling the water again. Though more salt is present than would dissolve at that temperature it will stay in solution.
Thanks
Helpful2 Not Helpful0
Compare different kinds of salts and compare salts with different solutes (e.g. sugar).
Thanks
Helpful3 Not Helpful0

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!

Warnings

If you are heating a solution, be careful not to burn yourself.
Thanks
Helpful1 Not Helpful4
Salts can react with your skin and other moist parts of your body. This can sting and burn. It is best not to come in direct contact with your salt.
Thanks
Helpful0 Not Helpful2