How to Cut a Six Piece Skirt

It can be hard to find a 6-piece skirt that fits you perfectly. Fortunately, you can measure and cut a skirt that hugs your hips down to your knees before it flares out at the bottom. By making your own skirt, you'll also be able to control how long you want it. Once you're comfortable cutting a 6-piece skirt, play around using several using different fabrics and patterns!

Part 1

Part 1 of 4:

Figuring Your Measurements

Download Article

1
Measure your waist and write down the result. Stand up straight and breathe normally before you wrap a measuring tape around your waist. If you're not sure where your waist is, feel above your hips and below your ribs to find it. Then, write down the measurement.^{[1]XExpert SourceAlessio Iadicicco
Apparel Manufacturing SpecialistExpert Interview. 20 May 2021.}^{[2]XResearch source}
- Ensure that the measuring tape lays flat around your waist. If it's twisted, your waist measurement will be off.
- The waist is where the top of your 6-piece skirt will sit.
2
Wrap the measuring tape around your hips and write the measurement. Move the measuring tape down so it circles around the widest part of your hips. It's important to write the measurement for the widest part or your skirt won't fit properly.^{[3]XExpert SourceAlessio Iadicicco
Apparel Manufacturing SpecialistExpert Interview. 20 May 2021.}^{[4]XResearch source}
- Keep your feet together when you measure your hips or they'll be spread too far apart.
Advertisement
Since the 6-piece skirt will flare out at the bottom, you need to measure from the waist to the knees. Measure from the top of the waist to the middle of your knee caps and write this measurement down.^{[5]XResearch source}
Next, hold the measuring tape at your waist and measure the total distance to the floor. If you want your skirt to be shorter, just write down your desired length.^{[6]XResearch source}
Tip: You may want to ask someone to help you with this measurement since it can be hard to stand straight while measuring.
5
Divide the waist and hip measurements by 4. You'll need to adjust the waist and hip measurements in order to find the width for your skirt. Take each measurement and divide by 4. Then, write down the new measurement.^{[7]XResearch source}
- For example, if the waist was 24 inches (61 cm), it's now 6 inches (15 cm). If your hips measured 34 inches (86 cm), the new measurement will be 8 ¹⁄₂ inches (22 cm).
6
Subtract 3 inches (7.6 cm) from the waist to knee line measurement. In order to move easily in your 6-piece skirt, you also need to adjust the waist to knee measurement. Subtract 3 inches (7.6 cm) and write the new measurement.^{[8]XResearch source}
- For example, if your original measurement was 19 inches (48 cm), subtract 3 inches (7.6 cm) to get 16 inches (41 cm).

Part 2

Part 2 of 4:

Marking the Measurements on Paper

Download Article

1
Spread pattern paper on a flat surface and lay a yardstick along the side. Unroll pattern paper on a table and cut it so it's as long as your skirt will be. For example, if your length measurement is 34 inches (86 cm), the pattern paper should be at least 34 inches (86 cm) long. Then, place a yardstick down the long side of the paper.^{[9]XResearch source}
- If you don't have pattern paper, use lightweight butcher paper.
- You'll use the yardstick to mark your measurements on the side of the pattern paper.
2
Make a mark ¹⁄₂ inch (1.3 cm) from the top of the paper. You'll be making the pattern for the skirt directly on the paper, so the top of the paper will be the top of the skirt. Mark ¹⁄₂ inch (1.3 cm) from the top which will be the seam allowance for the waist.^{[10]XResearch source}
- If it helps you keep track of the lines, you can write Waistline at the top of the paper.
Take your adjusted hip measurement and measure this distance down from the waistline mark you made. For example, measure 8 ¹⁄₂ inches (22 cm) from the top mark and make a new mark that says Hipline.^{[11]XResearch source}
Did You Know? A small skirt usually has an adjusted hip measurement of 7 to 8 inches (18 to 20 cm), medium is between 8 and 9 inches (20 and 23 cm), large is between 9 and 10 inches (23 and 25 cm), and xl is between 10 and 11 inches (25 and 28 cm).
4
Create a mark for the knee line. Use your adjusted knee line measurement and measure down from the waistline mark. For example, you may measure from the waistline down 16 inches (41 cm) to find the knee line.^{[12]XResearch source}
- Remember to write Knee Line next to the mark so you don't forget which measurement the mark is for.
5
Make a mark for the total length of the skirt on your paper. Refer back to the measurement you took for the length of the skirt from the waist down to the bottom. Measure this distance from the top waistline mark and make a new mark at the bottom.^{[13]XResearch source}
- You can label this mark Length.
6
Draw a horizontal line from each mark across the pattern paper. Lay a yardstick or ruler at each mark you made and use a pencil or pen to draw a long horizontal line for each.^{[14]XResearch source}
- To make this easier, you could use an L-ruler.

Part 3

Part 3 of 4:

Drafting a Pattern

Download Article

1
Make a mark at the waistline and hipline quarter measurements. Place a ruler parallel to the horizontal line you just made for each measurement. Then, make a mark at the quarter measurement for the waist and the hip.^{[15]XResearch source}
- For example, if the adjusted waist measurement was 6 inches (15 cm), make a mark on the horizontal line at this point. Your adjusted hipline measurement might be 8 ¹⁄₂ inches (22 cm).
Tip: You can make 2 more seam allowance marks on the waistline that are ¹⁄₂ inch (1.3 cm) and 1 ¹⁄₄ inches (3.2 cm) down from this mark. For the hipline, make another measurement that's ³⁄₄ inch (1.9 cm) from the quarter mark.
2
Mark the knee line and length line. To give your skirt room for you to move, subtract 2 inches (5.1 cm) from your adjusted knee line and measure this mark on the horizontal line. Then, add a few inches to the horizontal length line to give your skirt its flare.^{[16]XResearch source}
- For example, you might add 3 inches (7.6 cm) if you'd like the skirt to have a noticeable flare.
3
Connect all of the marks you made using a ruler or pattern master. Lay a ruler from the length and knee line marks you just made and draw a straight, diagonal line to connect them. To make smooth curves on your pattern, use a pattern master to draw from the knee line mark through the hip line mark up to the waistline mark.^{[17]XResearch source}
- You can buy the curved pattern master from most craft supply stores.
- You should now see a curve from the waist to the knee and a diagonal line flaring to the length line.
To keep track of your pattern once you cut it out, write Front on the lower panel of the piece. Then, draw another piece with the same measurements, but make them curve and flare towards the middle of your pattern paper.^{[18]XResearch source}
Tip: If you aren't trying to conserve paper, you can use the front piece as a template and cut out the back piece on another sheet of pattern paper.
5
Draw a dart in the center of the waistline. Find the middle of your waistline measurement and draw a triangular dart so the point is closer to the hip line. The size of the dart is up to you, but usually, you'll want:^{[19]XResearch source}
- Small: a 3 inches (7.6 cm) dart
- Medium: a 4 inches (10 cm) dart
- Large: a 5 inches (13 cm) dart
- Extra-large: a 6 inches (15 cm) dart
Tip: Add an extra 2 inches (5.1 cm) to the length of the back dart.

Part 4

Part 4 of 4:

Cutting the Patterns and Your Fabric

Download Article

1
Cut out both panels. Take sharp scissors and carefully cut out the front panel, starting at the bottom and up the diagonal line. Then, cut around the curve to the top of the paper. You'll also need to cut out the back panel.^{[20]XResearch source}
- Since you'll be cutting the fabric on the fold, these 2 panels will actually create 4 panels of your 6-piece skirt.
2
Cut each panel in half vertically and cut out the darts. Start at the base of the panel and cut a straight line through the center so you're cutting up towards the dart. When you reach the bottom point of the dart, cut a V to remove the dart completely. Repeat this for the other panel.^{[21]XResearch source}
- If your pattern paper was longer than the length you want your skirt to be, trim off the excess paper at the bottom.
3
Label the 4 pieces. It's easy to get the pieces of your pattern mixed around, so write on each piece in order to keep track of it. For example, label them:^{[22]XResearch source}
- Center back
- Side back
- Side front
- Center front
Tip: The side pieces flare diagonally at the bottom.
4
Add a 3 in (7.6 cm) diagonal flare to the bottom of each piece. Tape a 3 in (7.6 cm) wide strip of pattern paper to each panel. The paper should connect from the knee line to the length line. Then, draw a diagonal line from the bottom of the extended length line to the point of the knee line.^{[23]XResearch source}
- You can now trim off the excess paper from the side of each flare.
5
Fold your fabric and lay a panel along the fold. Spread the fabric for your skirt on the work surface and fold it over so the wrong side of the fabric faces up. Then, lay 1 of the panels on the fabric so the straight side matches the fold.^{[24]XResearch source}
- You can readjust the fabric's width once you've laid the pattern piece on it.
- You'll be doing this for each of the pattern pieces you made.
6
Trace the fabric along the pattern panel. Take a piece of tailor's chalk and run it on the fabric so you trace the outline of your panel and can remove it. Do this for every panel you make.^{[25]XResearch source}
- If the fabric shifts around a lot, you can pin the sides in place so your pattern won't move as you trace.
7
Draw a ¹⁄₂ inch (1.3 cm) seam allowance around the line you traced. Now you'll need to add space for a seam allowance, so use the tailor's chalk to draw an identical pattern that's ¹⁄₂ inch (1.3 cm) from the outline you just made.
- If you'd like to hem the bottom of the skirt, add a 1 inch (2.5 cm) seam allowance.^{[26]XResearch source}
8
Cut along the seam allowance lines to create the pieces for your skirt. Remove the paper patterns from the fabric and carefully cut along the seam allowance lines. Remember that you shouldn't cut along the fold. Instead, you'll open up the folded fabric to see the entire piece. Now you can pin the pieces for sewing your skirt.^{[27]XResearch source}
- Since this is a big sewing project, you should use a sewing machine to sew the skirt panels together.

Expert Q&A

Search

Add New Question

Question
How do you measure a six piece skirt?
Alessio Iadicicco
Apparel Manufacturing Specialist
Alessio Iadicicco is an Apparel Manufacturing Specialist based in Dallas, Texas. He was the CEO and Co-Founder of MarkersValley, an online apparel and manufacturer sourcing platform that connects luxury fashion brands to a network of highly-vetted, truly Italian manufacturers. After 6 years building MarkersValley, he transitioned into a career as a SBA Lender, currently working as VP of the SBA Business Development Office at U.S. Bank. Through this role, he helps small business owners secure the SBA funding they need to thrive. He holds a Bachelor's degree in Economy and Management of Financial Enterprises from The University of Naples Federico II. MarkersValley has connected fashion brands in over 100 countries and has a network of over 100 independent Italian factories and artisans. MarkersValley has been featured in Forbes, EQ, St. Louis Business Journal, Il Mattino, and Corriere Della Sera.
Alessio Iadicicco
Apparel Manufacturing Specialist
Expert Answer
Whatever the number of sheets of the skirt, always start by measuring the pelvis and waist circumference. The total number of pieces involved in the skirt must match the total number of measurements taken.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 2 Helpful 5
Question
How do you cut a 6 piece skirt?
Drew Hawkins1
Community Answer
In order for the cuts to be accurate, you need to have accurate measurements. Start by measuring your waist. Stand up straight and breathe normally before you wrap a measuring tape around your waist and write down the measurement. Next, move the measuring tape down so it circles around the widest part of your hips and write down the number. Then, measure from your waist to your knees and write it down. Finally, measure how far long you want the skirt to be by measuring from your waist to where you want the skirt to end. To adjust your waist and hip measurements to find the width for your skirt, divide them by four. Then, subtract 3 inches (7.6 cm) from the waist to knee line measurement to adjust for your knees. Use these measurements to cut your skirt.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 0 Helpful 8
Question
How do you cut a 6 pieces gown?
Drew Hawkins1
Community Answer
If you have good measurements, you can draft a pattern that you can use to cut the gown. Start by making a mark at the waistline and hipline quarter measurements, then mark the knee and length lines. Lay a ruler from the length and knee line marks you just made and draw a straight, diagonal line to connect them. Label the front piece, then repeat the process to make a back piece that is a reverse image. Finish the pattern by finding the middle of your waistline measurement and drawing a triangular dart so the point is closer to the hip line.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 3 Helpful 5