How to Convert Human Height in Centimeters to Feet

Depending on where you live, you're going to get radically different numbers for your height. That's because centimeters, which are on the metric system, are a much smaller unit than inches or feet, which are imperial units. Luckily, despite completely different number systems, anyone can convert centimeters to feet with a little patience and basic math skills.

Centimeters to Feet Converter

Method 1

Method 1 of 3:

Converting to Inches

Download Article

1
Measure your height in centimeters. Centimeters are used broadly in Europe, Canada, Asia, and most other countries using the metric system. Though Americans almost always measure height in feet, centimeters are much more common. For example, say you are 180 cm tall.^{[1]XResearch source}
- It is almost always easier to convert to inches, then convert to feet later. However, you can directly convert to feet if you have a calculator, which may be more accurate, too.
- To check your work, know now that 180cm is roughly 5'10 in feet.
2
Multiply your height in centimeters by .39 to convert your height into inches. There are roughly .39 inches in every centimeter. If you are calculating by hand and need an easier approximation, you could even multiply by .4, though you will not be as accurate. Note that this answer to this equation is always smaller than the original number of centimeters.^{[2]XResearch source}
- $180cm*.39{\frac {in}{cm}}=70.2inches$
- The fraction above stands for "inches per centimeter."
Advertisement
3
Determine how many 12-inch feet fit evenly into your measurement. There are twelve inches in each foot, and the example has 70.2 total inches. If your divide 70.2 by 12, you get 5.85ft, but be careful -- the decimal is not the number of inches. Since $12*5=60$ $How.com.vn English: 12*5=60$ , and $12*6=72,$ $How.com.vn English: 12*6=72,$ you know that the height must be above 5ft but below 6ft. So, if you have 5 full feet in 70.2", then 60 of your inches are accounted for. You just have to deal with the last 10.2".
- $180cm=70.2in$
- ${\frac {70.2in}{12}}=$ 5' + 10.2
4
Add the "leftovers" as your inches to get the final measurement. Once you know how many "perfect feet" fit into these inches, just add in the leftover to get your final answer!
- $180cm=70.2in$
- ${\frac {70.2in}{12}}=$ 5' + 10.2"
- 180 cm = 5'10.2
5
Get more accurate measurements by using the more precise $0.393701{\frac {in}{cm}}$ for your calculations.^{[3]XResearch source} If you need super accurate conversions, you must use a more accurate decimal for your conversion from centimeters to inches. To see it in action, note how the example above subtly changes.
- $180cm*.393701{\frac {in}{cm}}=70.86inches$
- ${\frac {70.86in}{12}}=$ 5' + 10.86"
- 180cm = 5'10.9^{[4]XResearch source}

Method 2

Method 2 of 3:

Converting Directly to Feet

Download Article

1
Multiply the number of centimeters by 0.0328084 to get the height in feet. This is a direct conversion, though it does not tell you the number of inches, directly. Instead, it tells you the number of feet -- so an answer of 6.25ft doesn't mean someone is "six feet, 2.5 inches." It means he is "six and a quarter (25%) feet tall," or 6'3". Continuing the example from other methods:
- $180cm=180cmx0.0328084{\frac {ft}{cm}}=5.905512ft$
- $180cm=5.905512ft$
2
Separate the decimal out if you want to get the precise number of inches. The integer, the whole number in the beginning, is the number of feet (in this case, 5). The decimal is the percentage of a foot added on. But this number isn't really helpful, since we never say "he is 5.9 feet tall." We give inches. Separate the two to begin to simple process.
- $180cm=5.905512ft$
- $180cm=5ft+.905512ft$
3
Multiply the decimal by 12 to convert it to inches. There are 12 inches in every foot, but you need to find out how many inches are in .905512 feet. To do so, simply multiply. If you have trouble remembering why, think about what you would do if you had 1 foot, and needed to know how many inches there were: $12in*1ft=12inches$ $How.com.vn English: 12in*1ft=12inches$ . What if it was 6: $12*6=72inches$ $How.com.vn English: 12*6=72inches$ . Now, what if the number was smaller than one, like .905? It's the same philosophy -- you get your inches based on the number of feet by multiplying by 12.^{[5]XResearch source}
- $180cm=5.905512ft$
- $180cm=5ft+.905512ft$
- $12{\frac {in}{ft}}*.905512ft=10.9inches$
4
Add your inches back to your total feet to get your converted height. Simply add back in the integer (the number before the decimal) with your new inches calculation. You've converted!^{[6]XResearch source}
- $180cm=5.905512ft$
- $180cm=5ft+.905512ft$
- $12{\frac {in}{ft}}*.905512ft=10.9inches$
- '180cm = 5' 10.9"^{[7]XResearch source}

Method 3

Method 3 of 3:

Estimating the Conversion Accurately

Download Article

1
Use simple percentages to get a basic estimation if you don't have a calculator. Remember that one centimeter equals roughly .39 inches. For estimation purposes, this means your height in inches is roughly 39% of your height in centimeters. To make this easier, round up to 40%. Now, since percentages in multiples of ten are so easy to figure out, you can get a quick approximation of your conversion.^{[8]XResearch source}
- Remember that 10% of any number simply moves the decimal one move to the left.
- Percentages always add to 100%, but can also be added anywhere in between. Thus, if you need to figure out 40% of a number, you can add 10% + 10% + 10% + 10%.
2
Multiple your height in centimeters by .10, or 10%. This will give you one tenth of your height. To do so without a calculator, simply move the decimal one place over to the left. Thus, 100 → 10, 9.2 → .92, and .421 → .0421. To continue a common example:
- $180cm*10\%=18cm$
- Don't forget that 10% = .10, as percentages are just another way to write decimals (ie. 40% = .4, and 59% = .59, etc.)
3
Multiply your 10% answer by 4 to estimate your height in inches. You have 10% of your height, but you need to estimate 40% of it. You can turn 10% into 40% by multiplying by four, and it doesn't matter what your actual percentages are. Simply substitute in your number from before and multiply by 4:
- $1cm=40\%in$
- $180cm*10\%=18$
- $10\%+10\%+10\%+10\%=40\%=10\%*4$
- $18*4=72in$
4
Divide by 12 to determine how tall someone is in feet. If the number doesn't go in evenly, simply divide it as close as possible, then add in the remaining inches by feet. So, if you get 50 inches, you would have 4 feet, with two inches left over. The person is 4'2. In the example, the answer is 72 inches, or exactly 6 feet, since 72 divided by 12 is 6. This division doesn't have to be hard, since there are really only a few options for human height:
- 12 inches = 1 foot.
- 24 inches = 2 feet
- 36 inches = 3 feet
- 48 inches = 4 feet
- 60 inches = 5 feet
- 72 inches = 6 feet
- 84 inches = 7 feet^{[9]XResearch source}
5
Alternatively, divide your 10% answer by 3 to get your rough height in feet. Remember how 1 centimeter converts to .0328084 feet? Just like any other decimal this can be converted to a percentage, meaning 1 centimeter is actually 3.3% of each foot (note: you convert a decimal to a percentage by multiplying it by 100). And, if you divide 10% by 3, you get roughly 3.3%. Now, just substitute your actual percentage for 10% in this equation and you have your estimation!
- $1cm=3.3\%feet$
- $180cm*10\%=18$
- ${\frac {10\%}{3}}=3.3\%$
- ${\frac {18}{3}}=$ $How.com.vn English: {\frac {18}{3}}=$ 6 feet, or 72 inches
  - Remember that a decimal in the answer is not the number of inches. To get that, multiply any remaining decimal by 12.^{[10]XResearch source}
6
Understand that these estimations will always come out a little taller than reality. Remember the original estimation for centimeters and inches? You converted .39 to 39%, which was then rounded up to 40%. While this makes the solution easier, it slightly overestimates the conversion by adding this percentage point. As a result, you should know that all estimations will be just a touch higher.
- You can make this slightly more precise by subtracting 1% from your initial number. So, instead of using 180cm, use 178.2cm. This is extra helpful if, instead of 180 cm, you get something more difficult, like 182cm. Knowing it will overestimate, cut it to 180.
- When using precise decimals, 180 cm = 5' 10.9".
- When estimating using the above methods, 180 = roughly 6 feet. They are only about an inch off -- but they are still different.

Community Q&A

Search

Add New Question

Question
How many cm for height of 5'3"?
Donagan
Top Answerer
5'3" is (5 x 12) + 3 = 60 + 3 = 63 inches. To convert to centimeters, multiply inches by 2.54.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 6 Helpful 10
Question
How do I round the centimeter height so it does not have a decimal point?
Community Answer
If the decimal portion is less than 0.5, then simply discard it. If it is 0.5 or greater, then add 1cm to the number on the left of the decimal point and discard the decimal. E.g: values like 178.1 to 178.4 have a decimal less than 0.5, so the rounded off value is 178. With a value like 178.5 to 178.9 the rounded off value is 179.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 2 Helpful 5
Question
What formula do I use for this solution?
Donagan
Top Answerer
If you're converting centimeters to feet, use the conversion factor shown in Method 2, Step 1 above.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 3 Helpful 3

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

A calculator will make your life much easier.
Thanks
Helpful0 Not Helpful0

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!

Warnings

Try not to forget that the decimal after the feet is not the number of inches. 4.3 does not mean "Four foot, three inches." It means you are four feet tall plus .3 foot tall, or 30% of a foot. You must multiply this decimal by 12 to get inches.
Thanks
Helpful2 Not Helpful0