Download ArticleDownload ArticleThis article was co-authored by Pradeep Adatrow, DDS, MS and by How.com.vn staff writer, Sophie Burkholder, BA. Dr. Pradeep Adatrow is the only board certified Dentist, Periodontist, and Prosthodontist in the southern United States. With over 15 years of experience, Dr. Adatrow specializes in dental implants, TMJ treatments, periodontal plastic surgery, surgical and non-surgical periodontics, bone regeneration, laser treatments, and soft tissue and gum graft procedures. He received a BS in Epidemiology and Biostatistics from the University of Alabama and earned his Doctor of Dental Surgery (DDS) degree from the University of Tennessee College of Dentistry. Dr. Adatrow then completed a three-year postgraduate program in periodontics and implantology at Indiana University and went on to complete another three-year postdoctoral program in advanced prosthodontics from the University of Tennessee. He also serves as a full-time professor and the Director of Surgical Prosthodontics at the University of Tennessee. Dr. Adatrow received the Dean's Junior Faculty Award and the John Diggs Faculty Award, and he was inducted into the Deans Odontological Society. He is board certified by the American Board of Periodontology and is a Fellow of the prestigious International College of Dentistry – a feat that only 10,000 others worldwide can claim.
This article has been fact-checked, ensuring the accuracy of any cited facts and confirming the authority of its sources.
This article has been viewed 148,502 times.
Your Waterpik may do a great job cleaning your teeth, but how can you do a great job cleaning your Waterpik? Whatever model of Waterpik you use, it’s a quick and easy process to wash and sterilize this handy water flosser—especially with these expert tips from our interview with board-certified dentist Pradeep Adatrow. Follow the simple steps below to clean your Waterpik from the inside out.
Cleaning a Waterpik
- Remove the water reservoir from the Waterpik and wash it in the top rack of your dishwasher. Let it air dry.
- Then, clean the internal parts by running a solution of 16 fluid ounces (470 mL) warm water and 1–2 tablespoons (15–30 mL) white vinegar through the unit.
- Finally, soak the handle and tip in separate containers of a 2:1 water and white vinegar solution. Rinse these parts in warm water and let them dry before reattaching.
Steps
Wipe down the outside of the unit. Unplug the unit from any power source. Wipe down the reservoir with a soft cloth and a mild, non-abrasive cleaner. Repeat this process weekly to keep the outside of your Waterpik clean.[1]
Clean the reservoir in your dishwasher. Remove the reservoir from the unit. If applicable, remove the small black reservoir valve by pushing on it from the bottom. Put the reservoir with the open side facing down into the top dishwasher rack. Run the dishwasher. Allow the reservoir to air dry rather than running a heat cycle.[2]- If you’re unsure how to remove the reservoir, review the Waterpik product manual for your model.
- If you don’t have a dishwasher, hand wash your Waterpik reservoir with warm soapy water.
- A handheld waterpik’s reservoir can be cleaned in the same way. Remove the reservoir and place it in the top rack of the dishwasher.[3]
- Repeat this deep cleaning of the reservoir and valve every 1-3 months—otherwise, “mineral deposits and other substances can accumulate within your Waterpik, causing a decrease in pressure and effectiveness,” says Adatrow.
Advertisement
Wash the valve, if applicable. Hold the valve under warm running water. Massage it continuously under the water for 30 to 45 seconds. Set it aside to air dry.[4]- Reattach the valve to the reservoir by pressing it back into place. The valve should be dome side up with the four prongs visible on the bottom of the reservoir.
- Both the valve and the reservoir should be completely clean and dry before reattaching them together.
Purge the flosser before and after each use. “Remove the reservoir and run the flosser for at least ten seconds with the reservoir detached,” instructs Adatrow. Turn off the unit. Wipe down the cavity under the reservoir with a paper towel.- Replace the reservoir but sit it at an angle so that the inner cavity and tubes can air dry.
- Adatrow asserts that this step is crucial in order to “prevent the growth of bacteria, mold, and mildew inside your Waterpik.”
Run diluted vinegar through the flosser. “Mix 16 fluid ounces (470 mL) of warm water with 1–2 tablespoons (15–30 mL) of white vinegar,” as recommended by Adatrow. “Run this solution through the Waterpik until the reservoir is empty,” Adatrow continues. Then, fill the reservoir with clean warm water and run the unit again to rinse out the vinegar solution. Clean your Waterpik with this vinegar solution every 1-3 months.- The vinegar solution removes hard water mineral buildup in the Waterpik, kills bacteria, and breaks down oil and grease.
- If you prefer to clean your Waterpik without vinegar, Adatrow offers a 3% hydrogen peroxide solution or mouthwash as alternatives. “To create your disinfectant,” Adatrow instructs, “mix two parts of water with one part of your disinfectant.”
- To clean the internal parts of a handheld Waterpik, add 1 tablespoon (15 mL) white vinegar to a full reservoir of warm water. Point the handle and tip toward the sink run the unit until the reservoir is empty.[5]
Leave the reservoir unattached. Place the disconnected reservoir on the counter. Alternately, place it on the unit at an angle so that the internal cavity is exposed. Allow the parts to air dry.[6]- Leave the reservoir unattached until the next time you use your Waterpik.
Clean the handle on countertop models. Press the eject button to remove the flosser tip, which will be cleaned separately. Fill a container with a 2:1 ratio of water and white vinegar. Place the flosser handle in the container and allow it to soak for 5-7 minutes. Rinse the handle with warm water.[7]- If you have a Radiance (WF-09) Waterpik model, do not soak its handle. The handle on this Waterpik contains a non-replaceable battery that could break if submerged in water.
Soak the flosser tip. Press the eject button to remove the tip. Fill a container with a 2:1 ratio of water to hydrogen peroxide or white vinegar. Soak the tip in the container for 5 minutes. Rinse the tip under warm water until clean.[8]
Replace the Waterpik tip every 3-6 months. Over time, the tip will get clogged with mineral deposits. These hard water deposits will interfere with the Waterpik's effectiveness. You can order replacement tips directly from Waterpik.[9]
Expert Q&A
Video
Tips
Warnings
- Don’t submerge the unit in water.Thanks
- Never use bleach, iodine, baking soda, salt, or concentrated essential oils in your Waterpik. These methods can affect how your product performs and how long it lasts.[10]Thanks
- Check your product manual or contact Waterpik if you want to use a solution other than diluted vinegar, 3% hydrogen peroxide, or mild mouthwash. Make sure that the solution is compatible with your product.[11]Thanks
Things You'll Need
- Soft cloth
- Mild liquid soap
- Paper towel
- Dishwasher
- White vinegar, mouthwash, or 3% hydrogen peroxide
- Empty container or sink basin
Expert Interview
Thanks for reading our article! If you’d like to learn more about taking care of your teeth, check out our in-depth interview with Pradeep Adatrow, DDS, MS.
References
- ↑ https://youtu.be/lzOoc2_tzeY?t=24
- ↑ https://www.waterpik.com/oral-health/product-support/articles/how-to-clean-waterpik-water-flosser-vinegar/
- ↑ https://www.waterpik.com/pdfs/wp-360-instruction-manual.pdf
- ↑ https://www.waterpik.com/oral-health/product-support/articles/how-to-clean-waterpik-water-flosser-vinegar/
- ↑ https://www.waterpik.com/pdfs/wp-360-instruction-manual.pdf
- ↑ https://www.youtube.com/watch?v=-hM_Q93t8zQ&feature=youtu.be&t=67
- ↑ https://www.waterpik.com/oral-health/product-support/articles/how-to-clean-waterpik-water-flosser-vinegar/
- ↑ https://www.waterpik.com/oral-health/product-support/articles/how-to-clean-waterpik-water-flosser-vinegar/
- ↑ https://www.waterpik.com/oral-health/product-support/articles/how-to-clean-waterpik-water-flosser-vinegar/
About This Article
If you want to clean your Waterpik, start by combining 16 ounces of warm water with 2 tablespoons of white vinegar. Next, pour the solution into the reservoir and run the Waterpik until half of it goes out. Then, drain the remaining solution through the handle into the sink and run warm water through the tank to get rid of any vinegar. Once you've washed the tank, remove the reservoir, take out the valve, and wash the reservoir in the dish washer. Additionally, remember to wipe down your Waterpik regularly to keep it clean and change the tip every 3-6 months. For tips on how to clean the handle and tip of your Waterpik, keep reading!
Reader Success Stories
"The tip to use mouthwash to clean it (duh on me) and put the reservoir in the dishwasher helped the most. Lost instructions, so I had no clue about the dishwasher and I was using hydrogen peroxide when mouthwash makes much more sense. Thank you!"..." more
Did this article help you?
⚠️ Disclaimer:
Content from Wiki How English language website. Text is available under the Creative Commons Attribution-Share Alike License; additional terms may apply.
Wiki How does not encourage the violation of any laws, and cannot be responsible for any violations of such laws, should you link to this domain, or use, reproduce, or republish the information contained herein.
- - A few of these subjects are frequently censored by educational, governmental, corporate, parental and other filtering schemes.
- - Some articles may contain names, images, artworks or descriptions of events that some cultures restrict access to
- - Please note: Wiki How does not give you opinion about the law, or advice about medical. If you need specific advice (for example, medical, legal, financial or risk management), please seek a professional who is licensed or knowledgeable in that area.
- - Readers should not judge the importance of topics based on their coverage on Wiki How, nor think a topic is important just because it is the subject of a Wiki article.
